Robalo 257 (R) T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Robalo 257 R Specifications

  • Length Overall: 25'3"
  • Beam: 9'2"
  • Weight: About 7,000 lb with power
  • Fuel Capacity: 165 gal
  • Fresh Water: 15 gal
  • Draft: 1'10" (motors up)
  • Power: Twin outboards (twin 150s–200s)
  • Livewell: 30 gal
  • Capacity: 11 people
  • Cover Shipping Weight: 38 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Runs up to the underside of the hardtop, wraps the supports, and covers the windshield, both consoles, seating, and twin outboards; hardtop roof stays exposed
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 38 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

Yes. The cover runs up to the underside of the standard hardtop and wraps its supports, enclosing the windshield, both consoles, and the bow and cockpit seating. The hardtop roof stays exposed.
Yes. The R257 runs twin outboards, and the cover wraps both engines together with the rest of the boat in one piece.
No. This pattern is for the R257 dual console (25'3", 9'2" beam). Robalo's center consoles in a similar size are different hulls and layouts, so contact us if you have another model.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is designed for storage only — on a trailer, lift, dry stack, or at the dock. Towing with it installed can damage the cover and voids the warranty, so take it off before you hit the road.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,800.00  ·  9oz $2,040.00  ·  Sunbrella $2,425.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Robalo 257 R T-Top Boat Cover — Custom-Fit for the Robalo R257 Dual Console and Its Hardtop

The Robalo R257 is Robalo’s 25-foot saltwater dual console, reviewed by Boating as a 2025 model and pitched as a fishable alternative to a typical bowrider. Boating’s test gives it a 25’3″ length overall, a 9’2″ beam, a weight of about 7,000 lb with power, a 165-gallon fuel tank, a 15-gallon freshwater tank and a 1’10” draft with the motors up, with seating for 11. It runs twin Yamaha outboards (twin 150s on the base boat; the test boat had twin 200s). A hardtop is standard, with six rod holders, storage boxes, LED spreader and overhead lights and outrigger-ready mounts, over a wraparound windshield with a wind dam. The bow has deep wraparound seating with a bolster and rails all around, and the cockpit has a portside lounge that converts to a full-length lounger, an entertainment galley with a sink behind the captain’s seat, a foldaway transom seat and a 30-gallon livewell. This T-Top cover is patterned for the Robalo R257 with its hardtop, and like all of our Robalo boat covers, it’s cut to this hull rather than a generic 25-foot size chart.

How It Fits the Robalo R257

The cover runs up to the underside of the hardtop and wraps around its supports, then drapes over the wraparound windshield and both consoles, the captain’s seat and port lounge, and the wraparound bow seating to the gunwales. Aft it covers the galley and foldaway transom seat and wraps both outboards as one piece; the hardtop roof, with its rod holders and lights, stays exposed. The R257’s 9’2″ beam is wide for a 25-footer, and the pattern follows that fuller hull so the cover stays snug. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or at the dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For a bigger Robalo, see the Robalo 360 R T-Top cover, or compare the Pursuit 266 DC T-Top cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })