Sea Hunt 211 Ultra CC — Quick-Reference Specs
- Boat Model: Sea Hunt 211 Ultra CC
- Cover Type: Center Console Mooring Cover
- LOA: 21' 1"
- Beam: 8' 3"
- Dry Weight: 2,300 lbs
- Engine: Single outboard, max 200 HP
- Fuel Capacity: 60 gallons
- Deadrise: 16° (variable, 50° entry)
- Hull Type: Variable-deadrise fiberglass
Cover Features
- Fit: Custom-fitted for the Sea Hunt 211 Ultra center console layout
- Attachment: Snaps, straps, and adjustable hem cord along the rubrail
- Console: Patterned around the center console with windshield and grab-rail cutouts
- Coverage: Full hull coverage from bow to stern, including outboard engine
- Fabric Options: 9oz marine canvas (most popular) or Sunbrella
- Construction: Reinforced stitching at all stress points with stainless snaps
- Warranty: Multi-year warranty against UV and weather damage
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 33 lbs |
|---|---|
| Fabric | 9oz Polyester |
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The Ultra 211 sits at the top of Sea Hunt's 211-platform lineup. It features a wider 8-foot 3-inch beam compared to the standard 211 CC and 211 LE, a variable-deadrise hull that starts at 50 degrees at the bow entry and transitions to 16 degrees at the transom for a smoother ride in chop, and premium hardware throughout including upgraded cleats, grab rails, and helm components. Our cover is patterned to the Ultra's specific dimensions and hardware layout — it is not interchangeable with covers for the 211 CC or 211 LE despite sharing the same hull length.
The Sea Hunt 211 Ultra measures 21 feet 1 inch overall with an 8-foot 3-inch beam, a dry weight of approximately 2,300 pounds, and a 60-gallon fuel tank. It accepts a single outboard engine up to 200 horsepower. The variable-deadrise hull transitions from a sharp 50-degree entry at the bow to 20 degrees amidships to 16 degrees at the transom. Standard features include a 25-gallon livewell, integrated rod holders, a full helm station with room for electronics, and a leaning post.
The cover is patterned specifically for the Ultra 211's console profile, including its forward-raked windshield, T-top mounting plates (if equipped), and grab rails. Darted seams follow the console contours so the fabric rises cleanly over the console peak and drapes down in one smooth, gradual slope to the stern without bunching or pooling water. Stainless steel snaps along the rubrail and adjustable straps beneath the gunwales lock the cover tight against the 8'3" beam.
Yes. The cover extends aft as one continuous piece to fully enclose the outboard engine, including the cowling, powerhead, and lower unit. There is no separate engine boot — the hem cord and rear strap system cinch around the motor well and transom so the entire engine sits protected beneath the same fabric shell that covers the rest of the boat. This single-piece design eliminates the seams and gaps where water and debris typically infiltrate with multi-piece cover systems.
Yes. When you place your order, note any aftermarket additions like a bow-mounted trolling motor, power poles, a jack plate, or oversized electronics. We modify the cover pattern to accommodate these — for example, a reinforced slit with drawstring closure for a trolling motor shaft, or adjusted aft panels to clear power pole mounts. The goal is a snug, custom fit that accounts for your specific setup, not just the factory configuration.
The Ultra 211's hull transitions from a very sharp 50-degree entry at the bow through 20 degrees amidships to a flatter 16 degrees at the transom. This means the bow sections are more V-shaped and narrower than the wider, flatter stern sections. Our cover pattern follows these hull transitions precisely — the darted bow sections accommodate the sharp entry angle, the midship panels span the widening beam, and the aft sections drape smoothly over the flatter transom area. This hull-matched patterning prevents excess fabric at the bow and ensures a tight fit across the full length.
This mooring cover is designed primarily for stationary storage — at the dock, on a lift, in dry stack, or on a trailer at rest. Trailering at highway speeds subjects the cover to sustained wind loads that can abrade fabric against hardware and fittings. If you regularly trailer your Ultra 211 at highway speeds, we recommend our travel-specific cover option with additional tie-down points, reinforced leading edges, and a tighter overall fit engineered for 65-plus mph winds without flapping or chafing.
A center console mooring cover is a full-deck cover patterned to the exact dimensions of your specific boat — hull length, beam, console shape, and hardware locations. Unlike tarps or universal covers that come in generic sizes and leave gaps around the console, a mooring cover fits like a tailored garment with no excess fabric to catch wind and no exposed areas where water and UV reach the deck. This precision fit prevents gelcoat fading, vinyl cracking, moisture intrusion into electronics, and the flapping that destroys loose-fitting covers in storms.
We offer two primary options: 9 oz solution-dyed polyester and Sunbrella acrylic. The 9 oz polyester is our most popular choice — heavy enough to resist tearing and abrasion, breathable enough to prevent trapped moisture and mildew, and the solution-dyed process locks color into each fiber so it will not fade or bleed onto your gelcoat. Sunbrella offers the highest UV resistance and color retention available, making it ideal for boats stored in direct sunlight year-round or in harsh saltwater environments. Both fabrics are treated with water-repellent and mildew-resistant finishes.
Select the Sea Hunt 211 Ultra from our product catalog, choose your preferred fabric and color, and note any modifications such as trolling motor cutouts, power pole clearances, or non-standard hardware during checkout. Our team builds the cover from model-specific patterns based on the Ultra 211's actual hull dimensions and console geometry. Most orders ship within a few business days and arrive with all necessary mounting hardware — stainless steel snaps, adjustable straps, and a hem cord. Contact our support team if you need help with fitment before ordering.
Why the Sea Hunt 211 Ultra CC Deserves More Than a Generic Cover
The Sea Hunt 211 Ultra is one of Sea Hunt’s most refined center console platforms — a 21’1″ hull with an 8’3″ beam, a variable-deadrise hull that transitions from a sharp 50-degree entry at the bow through 20 degrees amidships to 16 degrees at the transom, and room for up to 200 HP on the back. With 60 gallons of fuel, a 25-gallon livewell, integrated rod holders, and a full helm station, the Ultra 211 is built for serious inshore and nearshore fishing. A generic cover leaves gaps around the console, pools water on flat surfaces, and flaps in the wind — our custom-patterned cover eliminates all of that by matching the Ultra 211’s exact dimensions and hardware placement.
Built for the Ultra 211’s Performance Center Console Layout
The Ultra series sits at the top of Sea Hunt’s center console lineup for a reason — cleaner lines, better hardware, and a hull shape designed to perform in rough water. Our cover matches that standard of fit. The fabric rises smoothly over the center console without bunching around the windshield or grab rails, then follows one gradual, unbroken slope down to the stern. Stainless steel snaps along the rubrail and adjustable straps beneath the gunwales lock the cover tight against the 8’3″ beam so there is no slack to catch wind or pool rainwater. The hem cord cinches around the transom to fully enclose the outboard engine cowling and lower unit as one continuous shell from bow to stern. Browse our full selection of center console covers to see how we handle different hull layouts across the Sea Hunt lineup.
Fabric Engineered for the Ultra 211’s Coastal Lifestyle
Whether your Ultra 211 sits dockside between weekend runs or lives on a trailer at the house, the cover fabric needs to handle sustained UV exposure, salt air, rain, and seasonal temperature swings without breaking down. Our 9 oz solution-dyed polyester is the most popular choice — the color is locked into each fiber during manufacturing so it will not fade, bleed onto gelcoat, or transfer to vinyl seating. The weave breathes enough to vent trapped moisture and prevent mildew while still shedding rain effectively. For owners who demand maximum longevity in harsh saltwater environments, our Sunbrella option delivers premium UV resistance and color retention backed by a 6-year fabric warranty. If you are considering the T-Top version of this hull, compare the Sea Hunt 210 Ultra T-Top cover to see how we adapt our patterns for hardtop configurations in the Ultra family.
How Our Cover Protects the Ultra 211’s Premium Features
The Ultra 211 packs premium components into a 21-foot footprint — a full electronics suite, leaning post with rod holders, 25-gallon livewell, integrated tackle storage, and quality upholstery throughout the cockpit. Every one of those surfaces degrades when left exposed to sun, rain, bird droppings, and salt spray. Our cover provides complete bow-to-stern protection with reinforced stitching at every stress point — cleat locations, windshield edges, and tie-down attachments. The double-stitched seams and marine-grade stainless hardware hold their shape season after season without tearing or corroding. UV damage alone can crack vinyl seats, fog gauge lenses, and fade gelcoat in a single season of unprotected storage. The Sea Hunt 211 Escape LE cover shows how we handle the dual-console variant of the same 211 platform if you are comparing models.
Reviews
There are no reviews yet.