Sea Hunt 232 Ultra — Quick-Reference Specs
- Boat Model: Sea Hunt 232 Ultra (Discontinued)
- Cover Type: T-Top Mooring Cover
- LOA: ~23'2"
- Beam: ~8'6"
- Dry Weight: ~2,650 lbs
- Engine: Yamaha F250 (250 HP)
- Fuel Capacity: ~96 gallons
- Deadrise: ~18° (Vortex hull)
- Hull Type: Deep-V center console
Cover Features
- Fit: Custom-fitted for the Sea Hunt 232 Ultra T-top
- Attachment: Underside edges of factory T-top frame
- T-Top Roof: Stays fully exposed
- Coverage: 85–90% of hull sides, fully enclosing the outboard engine
- Fabric Options: 9oz marine canvas (most popular) or Sunbrella
- Construction: Reinforced stitching at all stress points with stainless snaps
- Warranty: Multi-year warranty against UV and weather damage
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 33 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
Our cover is custom-patterned specifically for the Sea Hunt 232 Ultra's approximately 23'2" LOA and 8'6" beam. It attaches to the underside of the factory T-top frame and drapes down to cover approximately 85–90% of the hull sides, fully enclosing the Yamaha F250 outboard. The pattern accounts for the 232 Ultra's Vortex hull geometry, console placement, and transom dimensions for a precise, model-specific fit.
Absolutely. Even though Sea Hunt no longer produces the 232 Ultra T-Top, we maintain the pattern and continue making covers for this model. Many 232 Ultra boats remain in active use, and a custom-fitted cover is one of the best ways to preserve the boat's condition and value over time. Discontinued models especially benefit from quality protection since replacement parts and gel coat repairs can be harder to source.
The Vortex hull on the 232 Ultra features an 18-degree deadrise optimized for open-ocean fishing. This hull geometry creates contours that differ from conventional V-hull designs. Our cover is patterned to follow the Vortex-specific curves precisely, ensuring the fabric sits taut across the entire hull profile without sagging or bunching. This model-specific fit also means the cover properly supports any water or debris accumulation during storms.
Yes. The cover wraps the stern and engine area as one continuous fabric piece, creating a natural contour around the Yamaha F250. The 250HP engine is the standard powerplant for the 232 Ultra, and our pattern accounts for this installation — no separate engine boot is needed. The cowling, lower unit, and all rigging are fully shielded from sun, rain, salt spray, and environmental debris.
The cover attaches to the underside edges of the factory T-top frame using stainless-steel snaps, with just 1–2 inches of visible hardware between the fabric and roof structure. The T-top roof stays fully exposed on top so rain slides off naturally. The fabric drapes around the T-top support posts — which remain almost entirely concealed within the cover — and secures along the gunwales with additional snap points and adjustable tie-down straps.
Yes to both. The cover is designed for mooring and trailering, with reinforced stitching at all stress points to handle highway wind loads. The multi-point tie-down system anchors the cover to your trailer frame and bunks for a secure, taut fit. At 23+ feet with an 8'6" beam, the 232 Ultra's cover is substantial — we recommend two people for installation, which typically takes about 30 minutes with the included hardware and documentation.
For a discontinued model that may already carry some years, premium fabric protection is especially valuable since preserving condition directly impacts resale value. We recommend Sunbrella acrylic (6-year fabric warranty) for maximum UV protection and colorfastness, or 9 oz. heavy-duty polyester (5-year warranty) for excellent durability at a lower price point. Both are solution-dyed and breathable. The 7 oz. polyester works well for sheltered or occasional-use scenarios.
A T-top mooring cover is a fitted fabric cover that attaches to your boat's T-top frame and drapes down over the hull for storage and trailering protection. Unlike a full canvas enclosure — which creates a sealed space you can walk inside — a mooring cover is designed purely for when the boat is not in use. It keeps out UV rays, rain, salt spray, pollen, and bird droppings while allowing airflow through the breathable marine fabric to prevent mildew and condensation.
We offer 7 oz. polyester (lightest, 3-year warranty), 9 oz. heavy-duty polyester (denser weave, 5-year warranty), and Sunbrella solution-dyed acrylic (premium UV resistance, 6-year warranty). The right choice depends on your storage environment and how often the boat sits covered. For a 232 Ultra stored outdoors in a saltwater environment, we typically recommend 9 oz. or Sunbrella. If your boat lives under a roof or gets frequent use, 7 oz. is a solid value option. Our team can help you decide based on your specific situation.
Select the Sea Hunt 232 Ultra T-Top from our product page, pick your fabric and color, then fill out the order form with your boat's year, engine make and horsepower, storage type, T-top style, and any aftermarket accessories like jack plates, power poles, or trolling motors. Our team reviews your details, confirms the order, and begins production on your custom-patterned cover. Turnaround times vary by season, but we keep you informed throughout. Call or email us with any fitment questions before you order.
Sea Hunt 232 Ultra T-Top Boat Cover (Discontinued Model)
The Sea Hunt 232 Ultra T-Top was a flagship offshore fishing platform combining big-water capability with premium accommodations. Though now discontinued, many 232 Ultra T-Top boats remain actively used and deeply valued by their owners. At approximately 23 feet 2 inches in length with an 8’6″ beam, the 232 carried 2,650 pounds of dry weight and featured a Yamaha F250 engine running on approximately 96 gallons of fuel — specifications that positioned it as one of Sea Hunt’s most capable large platforms. The Vortex hull design incorporated an 18-degree deadrise optimized for open-ocean fishing conditions. Explore all Sea Hunt boat covers to find the right fit for every model in the lineup.
Our cover for the 232 Ultra T-Top is precision-engineered for this specific boat’s dimensions and weight. The fabric attaches securely at the underside edge of the T-top roof panel, with just 1–2 inches of visible hardware. From that point, the cover drapes naturally around the T-top’s support posts and extends to the hull’s chine, covering approximately 85–90% of the hull sides and fully enclosing the Yamaha F250 outboard.
Discontinued Model, Premium Protection
Because the 232 is no longer in production, existing boats may have considerable age and accumulated wear. Premium protection becomes even more valuable for these vessels. We recommend selecting either our 9 oz. polyester or premium Sunbrella acrylic fabric. The 9 oz. polyester offers heavy-duty durability and abrasion resistance, while Sunbrella acrylic provides maximum UV protection and a 6-year fabric warranty. Both are solution-dyed and breathable, preventing mildew buildup and moisture accumulation during off-season storage. For the next size up in the Ultra family, check out our Sea Hunt 234 Ultra T-Top cover.
Large-Boat Installation and Anchoring
At 23+ feet and 8’6″ wide, the 232 Ultra T-Top cover requires proper installation with adequate tie-down hardware. The multi-point anchoring system runs from the cover’s bottom perimeter to multiple points on your trailer frame and bunks. Proper tensioning ensures the fabric sits taut and does not flap or shift during towing and storage. Our package includes all necessary tie-down straps, stainless steel hardware, and detailed installation documentation with photographs.
Protecting a Legacy Offshore Platform
The 232 Ultra T-Top represents a significant investment and a proven offshore fishing machine. During off-season storage, the boat faces threats from UV radiation, salt spray, rain infiltration, and environmental contaminants. Our cover eliminates these threats entirely, preserving the 232’s gel coat, hardware, electronics, and interior furnishings. The approximately 96-gallon fuel capacity indicates serious offshore intent — your 232 deserves equally serious protection. Pair the cover with proper winterization, and your legacy platform will remain ready for adventure whenever you are. Owners of the Triton series at a similar size may also want to explore the Sea Hunt 232 Triton T-Top cover for that hull.
Reviews
There are no reviews yet.