Sea Hunt 235 Ultra SE — Quick-Reference Specs
- Boat Model: Sea Hunt 235 Ultra SE (Special Edition)
- Cover Type: T-Top Mooring Cover
- LOA: 23'7"
- Beam: 8'6"
- Dry Weight: ~2,800 lbs
- Engine: Yamaha F200 (max 250 HP)
- Fuel Capacity: 96 gallons
- Deadrise: 18° (Vortex hull)
- Hull Type: Deep-V center console
Cover Features
- Fit: Custom-fitted for the Sea Hunt 235 Ultra SE T-top
- Attachment: Underside edges of factory T-top frame
- T-Top Roof: Stays fully exposed
- Coverage: 85–90% of hull sides, fully enclosing the outboard engine
- Fabric Options: 9oz marine canvas (most popular) or Sunbrella
- Construction: Reinforced stitching at all stress points with stainless snaps
- Warranty: Multi-year warranty against UV and weather damage
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 33 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
Our cover is custom-patterned specifically for the Sea Hunt 235 Ultra SE's 23'7" LOA and 8'6" beam. It attaches to the underside of the factory T-top frame and drapes down to cover approximately 85–90% of the hull sides, fully enclosing the outboard engine. The pattern accounts for the 235 Ultra SE's Vortex hull geometry, console placement, and transom dimensions for a precise, model-specific fit with no excess fabric.
SE stands for Special Edition, indicating that the 235 Ultra SE incorporates premium features, upgraded materials, and enhanced appointments compared to the standard Ultra lineup — higher-grade upholstery, premium electronics packages, and refined cabin finishes. The hull dimensions and exterior profile match other 235 models, so the SE designation does not change the cover's external fit. Our pattern is built for the 235 Ultra SE's exact hull shape.
The 235 Ultra SE is optimally powered by the Yamaha F200 (200HP), though the boat is rated to accept up to 250HP. Our cover wraps the stern and engine area as one continuous fabric piece, and the sizing accounts for standard engine installations on the 235 Ultra SE hull. Whether you're running the stock F200 or have upgraded to a larger outboard up to 250HP, the cover provides full engine enclosure without a separate boot.
Sea Hunt's Vortex hull on the 235 Ultra SE features an 18-degree deadrise optimized for responsive handling and a comfortable offshore ride. Our cover is patterned to follow these Vortex-specific contours precisely, ensuring the fabric sits taut across the entire hull profile without sagging or bunching. This model-specific fit also means the cover properly supports any water or debris that accumulates during storms.
The cover attaches securely at the underside edge of the factory T-top roof panel using stainless-steel snaps, with minimal visible hardware. The T-top roof stays fully exposed on top — any electronics or antennas mounted on the roof remain accessible and unaffected. The fabric drapes down around the T-top support posts and secures along the gunwales with additional snap points and a multi-point strap-and-buckle system.
Yes. The cover is designed for both mooring and trailering. Reinforced stitching at every stress point handles highway wind loads, and the multi-point tie-down system anchors the cover's bottom perimeter to your trailer frame at strategic locations, keeping the fabric taut across the 8'6" beam. At 2,800 lbs dry, the 235 Ultra SE is regularly trailered, and our stainless steel hardware and corrosion-resistant straps are engineered for marine salt exposure.
The 235 Ultra SE is the current-generation successor to the 232 Ultra. Both offer large-platform offshore fishing with similar beam widths (8'6") and T-top protection. The 235 is slightly longer (23'7" vs. ~23'2"), slightly heavier (2,800 lbs vs. ~2,650 lbs), and incorporates current-generation Vortex hull refinements plus the SE premium upgrades. Each cover is patterned for its specific model — they are not interchangeable.
A T-top mooring cover is a fitted fabric cover that attaches to your boat's T-top frame and drapes down over the hull for storage and trailering protection. Unlike a full canvas enclosure — which creates a sealed, walkable space for use while aboard — a mooring cover is designed purely for when the boat is not in use. It shields against UV, rain, salt air, pollen, and bird droppings while allowing airflow through the breathable marine fabric to prevent mildew and condensation.
We offer 7 oz. polyester (3-year warranty), 9 oz. heavy-duty polyester (5-year warranty), and Sunbrella solution-dyed acrylic (6-year warranty). For a premium Special Edition boat like the 235 Ultra SE, Sunbrella is the natural match — its superior UV protection, exceptional color retention, and breathable construction complement the quality of the boat itself. If budget is a consideration, 9 oz. polyester delivers excellent durability at a lower price. All fabrics are solution-dyed with zero dye transfer to your gel coat.
Select the Sea Hunt 235 Ultra SE T-Top from our product page, choose your fabric and color, then complete the order form with your boat's year, engine make and size, storage type, T-top configuration, and any aftermarket accessories (jack plate, power poles, trolling motor, etc.). Our team reviews your order details, confirms everything, and begins production on your custom-patterned cover. Turnaround varies by season, but we keep you informed throughout. Call or email us anytime with questions.
Sea Hunt 235 Ultra SE T-Top Boat Cover
The Sea Hunt 235 Ultra SE T-Top represents premium offshore fishing capability wrapped in a Special Edition package. At 23 feet 7 inches in length with an 8’6″ beam, the 235 Ultra SE weighs 2,800 pounds dry and delivers serious performance through a Yamaha F200 engine (with capability to accept up to 250HP) running on 96 gallons of fuel. The SE designation signals upgraded materials, premium appointments, and enhanced build quality throughout — hull, cabin, electronics, and interior finishes all reflect a higher standard. The Vortex hull features an 18-degree deadrise optimized for responsive handling, comfortable offshore rides, and excellent fuel economy. Explore all Sea Hunt boat covers to find the right fit for every model in the lineup.
Our cover for the 235 Ultra SE T-Top encompasses the complete boat in one continuous protective layer. The fabric attaches securely at the underside edge of the T-top roof panel with minimal visible hardware. From that point, the cover drapes naturally around the T-top support posts and extends all the way to the hull’s chine, covering approximately 85–90% of the hull sides and fully enclosing the outboard engine.
Special Edition Quality Deserves Premium Fabric Protection
For a boat of this caliber, we recommend Sunbrella acrylic fabric. Sunbrella’s premium construction and superior UV stabilization match the quality of the 235 Ultra SE throughout, with a 6-year fabric warranty, exceptional color retention, and breathable construction that prevents mildew buildup. Alternatively, our 9 oz. polyester provides heavy-duty durability at a more economical price point, and our 7 oz. polyester works well for sheltered or occasional-use scenarios. All fabrics are solution-dyed, preventing color transfer to your boat’s gel coat.
Large-Platform Protection and Anchoring
The 235 Ultra SE’s 23’7″ length and 8’6″ beam represent a substantial mooring footprint. Our cover includes a comprehensive multi-point tie-down system with stainless steel hardware and corrosion-resistant straps to ensure the fabric remains taut and secure during towing and storage. Reinforced stitching at every stress point handles highway wind loads. Installation typically requires two people and takes approximately 30–35 minutes with our detailed photographic instructions. For even larger offshore options in the Ultra family, visit our Sea Hunt 260 T-Top cover.
Preserving a Premium Investment
The 235 Ultra SE T-Top represents a significant investment in fishing capability and coastal cruising comfort. During off-season storage, UV radiation, salt spray, rain infiltration, and environmental contaminants threaten every exposed surface — gel coat, hardware, electronics, and interior furnishings. Our cover eliminates these threats entirely, preserving the 235 Ultra SE’s appearance and function year after year. The 96-gallon fuel capacity indicates serious offshore intent; your investment in a Special Edition boat warrants equally serious protection. If you’re interested in alternative configurations at this size, compare with our Sea Hunt 235 Escape CC cover.
Reviews
There are no reviews yet.