Angler 26 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Angler 26 Specifications

  • Builder: Angler Boat Corporation, Opa-locka, Florida (no longer building)
  • Model Names: 2600, 2600CC, 2600CC Limited Edition
  • Type: Center console, deep-V hull
  • Length: 25'6" overall
  • Beam: 8'9"
  • Hull Weight: About 5,000–5,300 lb (sources differ)
  • Fuel: 200 gal
  • Power: Twin outboards, 450 hp max
  • Cover Shipping Weight: 36 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Fits up under the T-top and covers the console, helm seating, bow, cockpit and transom, draping over the twin outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 36 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's patterned for the Angler 2600 center console, sold as the 2600 and 2600CC, 25'6" overall with an 8'9" beam and a T-top. Angler's 2500 and 2700 center consoles are different hulls, so please confirm your model and year when you order; if you aren't sure, check the model name and length on your registration or hull paperwork.
The cover runs aft over the transom and falls as one loose drape over both outboard cowlings together; there are no separate fitted engine pockets, and the lower units stay exposed below the hem. Tilt the engines down so the fabric hangs evenly. The 2600 is rated for up to 450 hp and was usually rigged with twins, so the pattern allows for two engines on the transom. If yours has a single engine, tell us when you order.
Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports, leaving the roof exposed. The T-top was an option on the 2600, and some boats have a leaning post with rod holders under it. If your boat has no top at all, contact us before you order, since this pattern is cut to go up under one. Tell us which top your 2600 has, and whether it carries outriggers or extra rod holders, when you order so we can check it against the pattern.
Yes. The cover runs over the molded bow seating and recessed bow rails down to the stem as one piece. Take off any loose bow cushions first so the fabric lies flat and sheds water instead of pooling.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,550.00  ·  9oz $1,750.00  ·  Sunbrella $2,080.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Angler 26 T-Top Boat Cover — Custom-Fit for the Angler 2600 Center Console

Angler Boat Corporation was a Miami-area builder of outboard fishing boats, with its factory in Opa-locka, Florida; Coast Guard manufacturer records list the company as out of business since 2014. The 26 is the Angler 2600 center console, also listed as the 2600CC; HMY’s guide lists it from 2004 to 2011. Florida Sportsman’s review gives 25’6″ overall, an 8’9″ beam, a 5,300 lb hull, 200 gallons of fuel and a 450 hp maximum, and the boats we found had twin outboards. HMY describes a deep-V hull with high freeboard, molded bow seating, a walk-in head in the console and wide walkways. Standard gear included twin pedestal seats, a folding stern seat, a transom livewell with sink, in-deck and transom fish boxes, a transom door and an integrated swim platform with ladder. A factory T-top and leaning post with rod holders were popular options, and the Limited Edition added upgraded deck gear and a larger coffin box. This T-Top cover is patterned for the Angler 2600 with its T-top, and like all of our Angler boat covers, it’s cut to this hull rather than a generic 26-foot size chart.

How It Fits the 2600

The cover fits up under the T-top and wraps its legs, so the top stays exposed. Below it, the cover takes in the console, windshield and helm seating, then runs forward over the bow seating to the stem, falling to the rubrail along the 8’9″ beam. Aft, it covers the cockpit, livewell and transom, then falls as one loose drape over both outboards, with the lower units exposed. Fold the stern seat down and take off loose cushions first. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. See also our Angler 204 T-Top cover and Angler 2900 T-Top cover.

Sign up for updates and information about our business