Blackfin 212 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Blackfin 212 Specifications

  • Length: 21'6" (including swim platform)
  • Beam: 8'6"
  • Dry Weight: About 3,600 lb
  • Fuel Capacity: 105 gal
  • Deadrise: 20° at the transom
  • Draft: About 18" (engine up)
  • Power: Single outboard, up to 300 hp
  • Livewell: 18 gal insulated
  • Cover Shipping Weight: 31 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Runs up to the underside of the hardtop or T-top, wraps the frame legs, and covers the console, leaning post, bow seating and outboard; roof stays exposed
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 31 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The modern Blackfin 212 CC (21'6", 8'6" beam), listed from about 2018, when it's fitted with the optional hardtop or a T-top. If you're not sure of your model, send us your year and a photo before ordering.
No. This pattern is cut to run up to the underside of a top and around its legs. Without a top, the cover would sag over the console. Contact us and we'll help you find the right cover.
No. The 242 is about three feet longer and has a wider 8'10" beam, so this cover would be too small. Order the Blackfin 242 T-Top cover for that boat.
No. The Blackfins built from the 1970s through the 1990s were different, mostly inboard-powered boats. This pattern is for the modern outboard-powered model built in Williston, Florida. If you own a classic Blackfin, contact us with the model and year.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $990.00  ·  9oz $1,190.00  ·  Sunbrella $1,460.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Blackfin 212 T-Top Boat Cover — Custom-Fit for the Blackfin 212 CC With Its Hardtop

The Blackfin 212 CC is the smallest center console in the modern Blackfin lineup, listed from about the 2018 model year. Blackfin built its first boats in 1973 and earned its name with offshore fishing boats, most of them inboard-powered; the brand was later acquired by Seabring Marine, the builder of Monterey Boats, and relaunched around 2017 with an all-new line of outboard-powered center and dual consoles built in Williston, Florida. The 212 measures 21’6″ with its integrated swim platform and has an 8’6″ beam, a dry weight of about 3,600 lb, a 105-gallon fuel tank and a 20° deadrise hull rated for a single outboard of up to 300 hp. Up front, wrap-around bow seating with removable backrests sits over large storage boxes and two insulated compartments; the console has an acrylic windscreen, and behind it is a leaning post with flip-up bolsters over a cooler, with an 18-gallon insulated livewell aft, gunwale and transom rod holders and a recessed swim ladder. A fiberglass hardtop on a powder-coated aluminum frame, with LED lighting and spreader lights, was an option. This T-Top cover is patterned for the Blackfin 212 with its top, and like all of our Blackfin boat covers, it’s cut to this hull rather than a generic 21-foot size chart.

How It Fits the Blackfin 212

The cover runs up to the underside of the hardtop or T-top and wraps around the frame legs, then drapes over the console and windscreen, the leaning post and the bow seating down to the gunwales, and continues aft over the livewell and the single outboard as one piece; the roof and its lights stay exposed. The 212’s fairly high freeboard for its size means the pattern reaches down to the rubrail all the way around, so the bow cushions and rod holders stay under fabric instead of peeking out above a short hem. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the next size up, see the Blackfin 242 T-Top cover or the Blackfin 252 T-Top cover.

Sign up for updates and information about our business