Blackfin 272 DC T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Blackfin 272 DC Specifications

  • Length: 27'2" (29'5" with engines)
  • Beam: 9'4"
  • Dry Weight: About 7,000 lb (without engines)
  • Fuel Capacity: 180 gal
  • Deadrise: 22° at the transom
  • Draft: About 1'9" (engines up) to 2'10" (down)
  • Max Power: 600 hp (twin outboards)
  • Bridge Clearance: About 8'7" with hardtop
  • Livewell: 30 gal transom baitwell
  • Cover Shipping Weight: 45 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Runs up to the underside of the hardtop, wraps the frame legs, and covers the windshield, both consoles, bow and cockpit seating, transom bench and twin outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 45 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The Blackfin 272 DC dual console (27'2" hull, 9'4" beam) with its standard hardtop, built from the 2019 model year on. Send us your year and a photo if you're unsure.
Yes. It runs up to the underside of the hardtop and covers the full-width glass windshield, the walk-through door and both consoles, along with the bow and cockpit seating.
No. Both are built on the same 27'2" hull, but the center console's narrow console and side walkways are shaped very differently from the DC's full-width windshield and two consoles. Order this DC pattern.
No. The Blackfins built from the 1970s through the 1990s were different, mostly inboard-powered boats. This pattern is for the modern outboard-powered model built in Williston, Florida. If you own a classic Blackfin, contact us with the model and year.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $2,300.00  ·  9oz $2,500.00  ·  Sunbrella $2,935.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Blackfin 272 DC T-Top Boat Cover — Custom-Fit for the Blackfin 272 DC Dual Console With Its Hardtop

The Blackfin 272 DC is the dual-console version of the 272, built from the 2019 model year and still listed new for 2026. Blackfin built its first boats in 1973 and earned its name with offshore fishing boats, most of them inboard-powered; the brand was later acquired by Seabring Marine, the builder of Monterey Boats, and relaunched around 2017 with an all-new line of outboard-powered center and dual consoles built in Williston, Florida. It shares the 272 CC’s 27’2″ hull (29’5″ overall with engines) and 9’4″ beam, weighs about 7,000 lb dry, carries 180 gallons of fuel and is rated for up to 600 hp on twin outboards; bridge clearance with the hardtop is about 8’7″. Standard equipment includes a fiberglass hardtop with rod holders, LED lighting and spreader lights, a tempered-glass windshield with a walk-through door, a head with a vanity and sink in the console, U-shaped bow seating with coaming bolsters, a convertible port lounge, port and starboard helm seats with flip-up bolsters, two in-floor fish boxes with macerated pump-outs, a 30-gallon transom baitwell with a see-through face, a foldaway transom bench and a transom door to an integral swim platform. This T-Top cover is patterned for the Blackfin 272 DC with its hardtop, and like all of our Blackfin boat covers, it’s cut to this hull rather than a generic 27-foot size chart.

How It Fits the Blackfin 272 DC

The cover runs up to the underside of the hardtop and wraps around the frame legs, then covers the full-width windshield and walk-through door and both consoles, drapes forward over the bow seating and aft over the helm seats, port lounge and transom bench down to the gunwales, and wraps the twin outboards at the stern as one piece; the roof stays exposed. Some 272 DCs carry optional acrylic side curtains or bow and aft shades — remove those before fitting the cover. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the center-console version of this hull, see the Blackfin 272 T-Top cover; for the smaller dual console, see the Blackfin 252 DC T-Top cover.

Sign up for updates and information about our business