7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
49 lbs
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
No. Sunbrella isn't offered on the Catalina 34 cover. Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty protection or 7oz polyester (Black) for budget-friendly coverage.
It's patterned for the Chris-Craft Catalina 34, introduced in late 2014 and built into the 2020s. Send us photos if your boat has outriggers, a tower or an aftermarket top.
Our T-Top style is made for any boat with a hard top or top frame — T-top, hardtop or pilothouse top. The cover runs up under the top and around its supports, so the roof stays exposed. Chris-Craft offered more than one top on this model, so tell us which one your boat has when you order and we'll confirm fit before we cut.
Yes. The stern section wraps the whole engine package — twin or triple outboards — as part of the same cover. Tell us which you have when you order.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or 7oz polyester (Black) for budget-friendly coverage. Solution-dyed fabric has the color built into the fiber, so it resists fading and won't bleed onto gelcoat or cushions.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz and 5 years on 9oz). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz$2,860.00 · 9oz$3,100.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Chris-Craft Catalina 34 T-Top Boat Cover — Custom-Fit for the Chris-Craft Catalina 34 Center Console
Chris-Craft, the Sarasota, Florida, builder whose roots go back to Christopher Columbus Smith’s boats in late-1800s Michigan, has been owned by Winnebago Industries since June 2018. The Catalina 34 is the largest boat in the Catalina center console line; Chris-Craft unveiled it for the October 2014 Fort Lauderdale show, and listings run from about 2015 into the 2020s. Chris-Craft’s specs give 34′ overall, a 10’10” maximum beam (9’8″ at the transom), 12,500 lb dry with triple engines, 26 inches of hull draft, 21 degrees of deadrise, 322 gallons of fuel and 40 of water, with twin Mercury Verado 350s or 400s or triple Verado 300s. The features a cover has to clear include a full-beam top over the helm with a glass windshield (a Sport Top at launch, a pilot house top with an electric SureShade on current boats), triple helm chairs with flip-up bolsters, a bow sun lounger and table, a cabin below the console with berth and head, fold-out cockpit benches and a U-shaped aft bench. This T-Top cover is patterned for the Catalina 34 with its top, and like all of our Chris-Craft boat covers, it’s cut to this hull rather than a generic 34-foot size chart.
How It Fits the Catalina 34
The cover runs up to the underside of the full-beam top and wraps its supports and windshield frame, leaving the roof exposed. It drapes over the helm and triple helm chairs, spreads forward over the bow lounger and table to the rubrail along the 10’10” beam, and continues aft over the fold-out benches and U-shaped seating to wrap the twin or triple outboards in one piece. Retract the SureShade and fold the cockpit benches before covering. At this size it’s the largest cover we make for the brand. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or a lighter 7oz fabric for budget-friendly coverage. Both options are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3 years on 7oz and 5 years on 9oz fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the 30-footer, see the Chris-Craft Catalina 30 T-Top cover; for the earlier 29, the Chris-Craft 29 T-Top cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.