Cape Horn 31 XS T-Top Boat Cover — Custom-Fit for the Cape Horn 31 XS With Its T-Top
The Cape Horn 31 XS is the extra-seating version of Cape Horn’s 31-footer; dealer listings we found are from about the 2012–2015 model years, and the model no longer appears on the factory lineup. Cape Horn boats are built by Fabbro Marine Group, a family-owned company in Milton, Florida, and every hull is built with foam-filled, unsinkable construction. Cape Horn groups its larger center consoles into a Tournament line (the “T” models) and an Extra Seating/Storage line (the “XS” models). Model-research data for the 31 XS lists a 9’1″ beam, a 1’10” draft, 273 gallons of fuel, a 20-gallon freshwater system and a 4,000 lb maximum load — the same beam and fuel figures Cape Horn gives for the 31T — and a 2012 listing gives an overall length of about 31 feet. Here “XS” stands for extra seating: forward seating in the bow is standard (rear seating is optional), the forward gunwales hold large storage compartments, and the cockpit is deeper. It also has a T-top with electronics box (a hardtop was optional), a walk-in console, a leaning post with backrest, 60- and 26-gallon livewells, a 7-foot 700-quart insulated fish box, a transom gate and 26 rod holders. This T-Top cover is patterned for the Cape Horn 31 XS with its T-top, and like all of our Cape Horn boat covers, it’s cut to this hull rather than a generic 31-foot size chart.
How It Fits the Cape Horn 31 XS
The cover runs up to the underside of the T-top and wraps around its legs, then drapes over the console, the leaning post and the forward seating down to the gunwales, and continues aft over the twin outboards as one piece; the T-top canopy and electronics box stay exposed. On the XS the pattern is shaped to fall over the bow seating and its backrests, and over the rear seat if your boat has one, so the forward seating is covered along with the console and cockpit. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the tournament version of this 31-footer, see the Cape Horn 31 T T-Top cover; for the 32-foot extra-seating model, see the Cape Horn 32 XS T-Top cover.
