Century 1801 Specifications
- Length Overall (LOA): ~18'
- Beam: 7'8"
- Dry Weight: ~1,850 lbs
- Engine: Single outboard, max 115 HP
- Fuel Capacity: ~50 gallons
- Hull Type: Fiberglass deep-vee center console
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5-7 years); Sunbrella acrylic (8-10 years)
- Fit: Custom-fitted to 18' Century 1801 specifications
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 28 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The Century 1801 cover is available in 9oz solution-dyed marine polyester, 7oz solution-dyed polyester, and premium Sunbrella acrylic. All fabrics are solution-dyed — color is permanently fused into every fiber — so the 1801 cover resists fading from years of Florida sun and coastal salt air exposure on dock lifts and trailers.
Yes. Pattern-cut with reinforced cutouts that fit precisely around the T-Top support legs. The fabric wraps the 1801's compact 18' hull below the hardtop while leaving the white fiberglass roof fully exposed. The pattern accounts for the 1801's center console, leaning post, and compact fishing cockpit.
Installation takes under 5 minutes solo with no tools. Start at the bow, drape over the console and T-Top legs, then secure with the hem cord at the rubrail and adjustable tie-down straps with quick-release buckles. The 1801's compact 18' length and 7'8" beam make it one of the easiest boats to cover single-handed.
Absolutely. The 1801 cover is reinforced at all stress points for highway-speed trailering. At approximately 1,850 pounds dry with a compact footprint, the 1801 is one of the most frequently trailered boats in the Century lineup, and this cover is built specifically for that repeated trailering duty cycle.
Complete barrier over the Century 1801's helm electronics, GPS/fishfinder, rod holders, and all seating surfaces. UV rays, rain, salt spray, bird droppings, pollen, and airborne debris are all blocked while the breathable fabric prevents moisture and mildew buildup underneath.
Every Century 1801 cover includes a 2-year manufacturer warranty covering defects in materials and workmanship. The 9oz fabric is rated for 5-7 years and Sunbrella acrylic for 8-10 years of continuous coastal exposure.
Water-resistant with a DWR (durable water repellent) finish that causes rain to bead and roll off. The fabric is also breathable — trapped moisture and humidity escape through the weave, preventing mildew on the 1801's upholstery and electronics. This is critical in humid Gulf Coast and Florida climates.
Yes. Pattern-cut to the Century 1801's standard production dimensions (~18' LOA, 7'8" beam) with the factory T-Top configuration. Century's hull design remained consistent across the 1801 production run.
The 9oz solution-dyed fabric comes in Navy, Black, and Charcoal — classic colors that complement the Century hull finish. Sunbrella acrylic offers an expanded palette. All options are solution-dyed for permanent UV fade resistance.
Shipping is a flat $30 per cover to anywhere in the continental United States. Orders ship within 1-2 business days and arrive in a protective storage bag.
Century 1801 T-Top Boat Cover — Nearly 100 Years of Boatbuilding Heritage
The Century 1801 measures approximately 18′ overall with a 7’8″ beam and roughly 1,850 pounds dry — the most compact center console from Century Boats, one of America’s oldest boat brands with roots stretching back to 1926 when the Welch brothers started building wooden racing hulls in Milwaukee. Nearly a century later, Century builds modern saltwater fishing boats out of Panama City, Florida using 100% composite construction with no wood whatsoever — quad-axis fiberglass laminate with vinylester resins, a composite molded stringer system bonded and glassed to the hull, and a deck cap bonded for unitized durability. Powered by up to 115 horsepower with approximately 50 gallons of fuel, the 1801 packs practical fishing capability into a package that trailers behind a midsize SUV. A custom-fitted T-Top boat cover keeps this century-old brand’s compact platform sealed against Florida sun, salt spray, and afternoon thunderstorms.
Pattern-Cut for the 1801’s Compact Fishing Layout
This cover is cut for the Century 1801’s composite hull, center console helm, and compact fishing cockpit. The fabric wraps the hull below the hardtop with reinforced cutouts around the T-Top support legs, while the white fiberglass hardtop roof remains fully exposed on top. A hem cord at the rubrail and adjustable tie-down straps secure the cover for trailering at highway speeds — the 1801 is one of the most frequently trailered boats in the Century lineup at just 1,850 pounds. Installation takes under five minutes solo. The next step up is the Century 2000 T-Top boat cover, covering the 20-foot platform with the same precision.
Composite Construction, Premium Fabric
Century’s 100% composite, wood-free construction means the 1801’s hull integrity won’t degrade over time the way traditional fiberglass boats with balsa or plywood coring can. Your cover should deliver the same longevity. Choose 9oz solution-dyed marine fabric for 5-7 years of UV and salt resistance, or premium Sunbrella acrylic for 8-10 years. Both are water-repellent, mildew-resistant, and breathable to prevent trapped moisture damage. Double-stitched seams handle regular trailering. Every cover ships with a 2-year warranty within 1-2 business days. For the mid-size lineup, the Century 2200 T-Top boat cover covers the 22-foot platform with the same composite-quality protection.
Reviews
There are no reviews yet.