Century 2200 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Century 2200 Specifications

  • Builder: Century Boats
  • Length: 22'
  • Beam: 8'6"
  • Draft: About 17"
  • Weight: About 3,500 lb (without engine)
  • Fuel Capacity: 100 gal
  • Max Power: 250 hp, single outboard
  • Deadrise: 20° at the transom
  • Baitwell: 30 gal, aerated
  • Cover Shipping Weight: 32 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: T-top frame legs and electronics box, console, leaning post, bow and rear seating, and outboard
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 32 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's patterned for the Century 2200 Center Console with a T-top. The model was sold in the mid-2000s and again from about 2016 to 2022; if you have an earlier boat or one with an aftermarket top, send us photos and we'll confirm fit.
The cover runs up to the underside of the top and around its supports, so it works with either top as long as the frame is the factory style. Let us know which top you have when you order.
Yes. The stern section wraps the single outboard as part of the same cover, so you don't need a separate motor cover.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,015.00  ·  9oz $1,240.00  ·  Sunbrella $1,500.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Century 2200 T-Top Boat Cover — Custom-Fit for the Century 2200 Center Console With a T-Top

Century Boats dates to 1926. Yamaha owned it from 1995 until shelving the brand in 2009, Allcraft Marine revived it in 2012 with production in Zephyrhills, Florida, and after Allcraft’s 2025 bankruptcy the name passed to American Nautical Holdings. The 2200 Center Console spans both eras: used boats are listed from the mid-2000s Yamaha years and again from Allcraft’s production, from about 2016 to 2022. The later factory specs give 22′ overall with an 8’6″ beam, about 3,500 lb without engine, 100 gallons of fuel, about 17 inches of draft and 20 degrees of transom deadrise, with a single outboard of up to 250 hp. Features that shape a cover include an aluminum T-top with an electronics box, spreader lights and rod holders (a fiberglass hardtop was optional), an aluminum leaning post with backrest, tackle drawers and cooler, a 30-gallon aerated baitwell, rear seating, and a console with a porta-potti compartment. This T-Top cover is patterned for the Century 2200 with its T-top, and like all of our Century boat covers, it’s cut to this hull rather than a generic 22-foot size chart.

How It Fits the Century 2200

The cover rises to the underside of the T-top and wraps its legs and electronics box, leaving the top exposed. It falls over the console and the leaning post and its cooler, spreads forward across the bow seating to the rubrail, and covers the rear seat and baitwell before wrapping the single outboard in one piece. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Not the Same as the Century 2202

The similarly numbered 2202 is a Century bay boat (2004–09) with casting decks and a different hull, so it needs its own cover. This pattern is for the 2200 Center Console.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the 23-footers, see the Century 2300 T-Top cover and the Century 2301 T-Top cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })