Chris Craft 29 ST T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Chris-Craft 29 ST Specifications

  • Builder: Chris-Craft (Sarasota, FL)
  • Likely Model: Catalina 29 Sun Tender (about 2012–2014)
  • Length Overall: About 29'2"
  • Beam: 10'2"
  • Dry Weight: About 6,612 lb (listing)
  • Fuel Capacity: 220 gal
  • Power: Twin outboards, 250–300 hp each
  • Deadrise: 21° at the transom
  • Cover Shipping Weight: 39 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Top supports, helm and windshield, bow sunpad, cockpit settee and table, and twin outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 39 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

We believe it's the Catalina 29 Sun Tender, the cruising version of Chris-Craft's 29-foot Catalina with a bow sunpad and cockpit settee. If your boat is a different 29-foot Chris-Craft, send us photos before ordering.
Both are for the 29-foot Catalina hull, but the Sun Tender trades the fishboxes and livewell for a full bow sunpad and a U-shaped settee with a teak table, so it's listed as its own pattern. Choose the plain 29 page for the fishing layout.
Our T-Top style is made for any boat with a hard top or top frame — T-top, hardtop or pilothouse top. The cover runs up under the top and around its supports, so the roof stays exposed. Chris-Craft offered more than one top on this model, so tell us which one your boat has when you order and we'll confirm fit before we cut.
Yes. The stern section is cut to wrap both outboards as part of the same cover, so you don't need separate motor covers.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,900.00  ·  9oz $2,150.00  ·  Sunbrella $2,550.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Chris-Craft 29 ST T-Top Boat Cover — Custom-Fit for the Chris-Craft Catalina 29 Sun Tender

Chris-Craft, the Sarasota, Florida, builder whose roots go back to Christopher Columbus Smith’s boats in late-1800s Michigan, has been owned by Winnebago Industries since June 2018. “29 ST” most likely stands for the Catalina 29 Sun Tender, a day-cruising version of the Catalina 29 center console; Boating explains Chris-Craft built it because many 29 owners were using the boat more for cruising than fishing, and listings show it from about 2012–2014. It shares the 29’s hull: listings give about 29’2″ overall, a 10’2″ beam, about 6,612 lb dry, 220 gallons of fuel and 21 degrees of transom deadrise, with twin outboards from 250 to 300 hp. What changes is the deck: a full bow sunpad replaces the fishboxes, a U-shaped settee with a solid teak table fills the cockpit, a refrigerator under the companion seat replaces the livewell, and an upholstered head door forms the aft end of the sunpad. This T-Top cover is patterned for the Catalina 29 Sun Tender with its top, and like all of our Chris-Craft boat covers, it’s cut to this hull rather than a generic 29-foot size chart.

How It Fits the 29 Sun Tender

The cover runs up to the underside of the top and wraps its supports, leaving the roof exposed. It falls over the center helm and windshield, spreads forward over the full bow sunpad to the rubrail, and covers the U-shaped cockpit settee and teak table aft before wrapping both outboards in one piece. Remove loose cushions and stow the table low if it’s not fixed, so the cover lies smooth over the cockpit. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Check Your Top Before Ordering

Boating’s test boat carried a Bimini whose frame slides on tracks, and a 2014 listing describes a sport top with a sliding sunshade. Our T-Top covers are made for boats with a hard top or fixed top frame, so tell us which top your Sun Tender has when you order and we’ll confirm fit before we cut.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the fishing version, see the Chris-Craft 29 T-Top cover; for the larger model that followed, the Chris-Craft Catalina 30 T-Top cover.

Sign up for updates and information about our business