Contender 30 ST Specifications
- Length Overall (LOA): 29'8"
- Beam: 9'6"
- Dry Weight: ~5,450 lbs
- Engine: Twin outboards, max 800 HP combined
- Fuel Capacity: 260 gallons
- Draft: ~20"
- Hull Type: Deep-V stepped hull, 24.5° deadrise, twin outboard center console
- Model Years: 2012–present
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5-7 years); Sunbrella acrylic (8-10 years)
- Fit: Custom-fitted to 29'8" Contender 30 ST stepped-hull specifications
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 42 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The Contender 30 ST cover is available in 9oz solution-dyed marine fabric (5-7 years) or premium Sunbrella acrylic (8-10 years). Both are water-repellent, mildew-resistant, and UV-stable.
Yes. Pattern-cut with reinforced openings for the 30 ST's T-Top support legs. The hardtop remains exposed while the cover protects the stepped hull and cockpit below.
Installation takes under 5 minutes. Drape the cover, align around the T-Top legs, and secure with strap-and-buckle tie-downs at the rubrail. No tools required.
No — please remove the cover before towing your Contender 30 (ST). Our covers are not designed to be trailered: towing with the cover on can cause severe damage to the cover and voids the warranty. The cover is designed for storage only — on a trailer, boat lift, dry stack, or jet dock — and comes off in minutes at the ramp.
Absolutely. Complete barrier over helm electronics, GPS, radar, fish finder, leaning post, and all cockpit surfaces from UV, rain, salt, and debris.
Your Contender 30 (ST) cover is backed by our manufacturer's warranty for the original purchaser. Materials and workmanship — stitching, straps, buckles, zippers, and other hardware — are covered for 1 year from the purchase date. Fabric is covered for 3 years on 7oz, 5 years on black or navy 9oz, and 6 years on Sunbrella. Covered defects are repaired or replaced after you contact us for a Return Merchandise Authorization (RMA) number. The warranty does not cover improper use, accident or negligence, unauthorized modifications, improper care, mold or mildew, incorrectly placed orders, theft or loss, or acts of God — and traveling with the cover on or using it in the water voids the warranty. See our Warranty page for full details.
Water-resistant with DWR finish. Breathable to prevent moisture buildup and mildew — essential for boats stored in saltwater marina environments.
Yes. Fits the Contender 30 ST with factory T-Top across standard production years. Consistent hull dimensions ensure precise fit.
The Contender 30 (ST) cover is available in 9oz solution-dyed polyester in Navy or Black, 7oz polyester in Black, or premium Sunbrella acrylic in Marine Blue, Black, or Smoke. Choose your fabric and color in the order options above.
Shipping is a $30 flat rate per cover within the continental United States. Because every cover is custom-made to order, please allow 1–3 weeks for your Contender 30 (ST) cover to be made and shipped — you'll receive tracking information as soon as it leaves our facility.
Pricing: 7oz $2,300.00 · 9oz $2,500.00 · Sunbrella $2,935.00 — your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Contender 30 ST T-Top Boat Cover — Stepped-Hull Offshore Performance Protection
The Contender 30 ST introduced Contender’s proprietary stepped-hull technology to the 30-foot class — a 30-foot deep-V with 24.5-degree deadrise, a 9’6″ beam, and twin outboards delivering up to 800 combined horsepower. The stepped hull breaks the water’s surface tension at speed, reducing drag and improving fuel efficiency while maintaining the rough-water handling that defines every Contender. At roughly 5,450 pounds dry, the 30 ST’s hand-laminated biaxial and triaxial fiberglass over structural PVC core delivers a hull engineered to run hard day after day in the Gulf Stream and beyond. Browse our full collection of center console boat covers to find protection for every boat in your fleet.
Pattern-Cut for the 30 ST’s Stepped-Hull Dimensions
The 30 ST’s stepped hull creates a wider beam at the chine than conventional hulls of the same length, and the T-Top framework is positioned to complement this unique geometry. Our cover is pattern-cut for the 30 ST’s specific dimensions, wrapping around the T-Top legs and draping over the console, leaning post, and the full 9’6″ beam cockpit. The strap-and-buckle system secures at the rubrail in under five minutes. Remove the cover before towing — it’s designed for storage, not travel. Every rod holder, livewell, insulated fish box, and electronics component is fully shielded underneath. For Contender’s fish-around model in the 31-foot class, see our Contender 31 FA T-Top cover.
Built to Handle What the Gulf Stream Dishes Out
A boat designed for overnight canyon trips and multi-day Bahamas runs deserves a cover that can handle the same exposure on the lift between trips. Our 9oz solution-dyed marine fabric delivers 5–7 years of UV-stable, water-repellent, mildew-resistant protection — no fading, no water absorption, no mildew growth under South Florida’s subtropical conditions. Sunbrella acrylic extends that to 8–10 years. Double-stitched seams, hem cord at the rubrail, and our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) come standard. For a versatile mid-range Contender, explore our Contender 24 Sport T-Top cover.