EdgeWater 262 Specifications
- Length Overall (LOA): 26'5"
- Beam: 9'3"
- Dry Weight: ~6,500 lbs
- Engines: Dual outboards, max 500 HP total
- Fuel Capacity: 155 gallons
- Draft: ~21"
- Hull Type: Single-Piece Infusion (SPI) foam-filled, unsinkable
- Person Capacity: 12
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5–7 years); Sunbrella acrylic (8–10 years)
- Fit: Custom-fitted to 26'5" EdgeWater 262 specifications
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 36 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The 262 is where EdgeWater transitions from single-engine to dual-outboard power — up to 500 HP total on a 26'5" platform with a wider 9'3" beam. This combination provides the thrust and stability needed for serious offshore fishing, while the 155-gallon fuel tank delivers range to deep-water structure 40+ miles from shore.
The 262's 9'3" beam is nearly a foot wider than the 8'6" Heritage and smaller CC models. Our cover pattern uses substantially more fabric to account for this width, ensuring complete coverage across the wider cockpit, gunwales, and dual-engine transom. The wider beam also means the cover handles wind load differently, so our tie-down system is reinforced accordingly.
Yes. The T-Top cover extends past the transom to wrap over both outboard engine cowlings. Our pattern is designed for dual-engine configurations, with the fabric draping cleanly between and around both engines. The engines remain accessible for service by lifting the stern section of the cover.
Absolutely. The 262 features dual fish boxes in the aft cockpit, and our cover wraps all deck-mounted storage including these insulated boxes, their lids, and drain hardware. UV protection extends the life of gaskets, hinges, and gel coat finishes on fish box lids.
The 9'3" beam exceeds the standard 8'6" trailering limit in most states, meaning the 262 typically requires a wide-load permit for highway transport. Many owners keep the 262 on a dock lift or in a marina slip. Our cover is designed for all storage configurations — trailer, lift, or slip.
EdgeWater's SPI construction is engineered for dual-engine torque loads. The one-piece foam-filled hull distributes engine stress across the entire structure rather than concentrating it at the transom, eliminating the transom flex and stress cracking common in traditional fiberglass boats with twin engines.
Rinse with fresh water every two weeks in saltwater environments. Full wash with mild soap twice per season. Annual inspection of stitching seams, tie-down straps, and hem cord. For boats stored at open-water marinas with heavy salt exposure, monthly rinsing extends cover life significantly.
During active hurricane or tropical storm warnings, we recommend removing the cover and following your marina's storm preparation protocol. Between storms, the cover provides excellent protection from summer UV, rain, and salt spray throughout the season.
Aftermarket additions like LED light bars, outrigger mounts, and rocket launchers above the T-Top hardtop remain exposed above the cover. For below-hardtop modifications like additional electronics, speakers, or rod holders, notify us during ordering for pattern adjustments.
The 265 adds an additional foot of length (26'6" vs 26'5"), a wider 9'6" beam, larger 200-gallon fuel tank, and deeper 30" cockpit depth. The 262 is the more compact dual-engine option, while the 265 is built for maximum offshore capability and fuel range.
EdgeWater 262 T-Top Boat Cover
The EdgeWater 262 is where the Center Console Series gets serious about offshore power — a 26’5″ platform with a 9’3″ beam, dual outboard capacity up to 500 HP, and a 155-gallon fuel tank built for extended runs to deep-water structure. Like every EdgeWater, the 262 is constructed through the patented SPI vacuum-infusion process: one-piece, foam-filled, unsinkable hull with zero wood, PermaGrid fiberglass structural system, and 316L stainless steel throughout. At ~6,500 lbs dry, this is a substantial fishing machine that demands proper protection between trips.
A Perfect Fit custom T-Top cover wraps the 262’s entire deck — dual aft fish boxes, livewells, rod storage, console electronics, and both outboard engines — in UV-resistant, salt-proof solution-dyed marine fabric. The cover is patterned to the 262’s wider 9’3″ beam and dual-engine transom, with reinforced stitching at stress points and a heavy-duty tie-down system designed for the wind loads that a 26-foot boat encounters at open-water marinas.
Dual-Engine Offshore Power
The 262 represents a significant step up from EdgeWater’s single-engine models. Twin outboards provide the redundancy serious offshore anglers demand — if one engine goes down 40 miles offshore, you have a second to get home. The 155-gallon tank and 500 HP max power deliver the speed and range to reach productive bottom structure, wrecks, and canyon edges. Our T-Top cover protects the full dual-engine setup, wrapping both cowlings and the transom hardware that takes the brunt of salt spray during high-speed runs.
Explore the EdgeWater Collection
Perfect Fit covers every EdgeWater model from Heritage to offshore flagship. Browse our center console curtain enclosure for on-water weather protection, or compare the EdgeWater 262 CX T-Top cover for the crossover dual-console version. For a compact option, see the EdgeWater 175 center console cover.
Reviews
There are no reviews yet.