Everglades 230 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Everglades 230 Specifications

  • Builder: Everglades Boats, Edgewater, Florida
  • Model Years: About 2009–2017 (listings, spec sheets)
  • Length: 23'7" (24' with engine)
  • Beam: 8'6"
  • Draft: About 15" (hull)
  • Weight: About 3,800–4,300 lb without engine
  • Fuel Capacity: 108–112 gal
  • Max Power: 300 hp single outboard
  • Deadrise: 19° transom, 36° average
  • Cover Shipping Weight: 33 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Hardtop frame, console and windshield, leaning post, forward and bow seating, stern seats, swim platforms and outboard
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 33 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The Everglades 230 CC center console, built from about 2009 through at least 2017, with its fiberglass hardtop. Tell us your model year when you order so we can confirm the fit.
No. The 235 CC is a newer, heavier 23-footer with a different hardtop, a swiveling helm seat and full-beam transom seating, so it has its own pattern.
The 230 DC has two consoles and an aluminum arch rather than a hardtop. Our Everglades 230 DC cover is the full-boat style for that boat; contact us if yours has had a hardtop added.
Our T-Top style is made for any boat with a hard top — an aluminum T-top, a canvas-roofed T-top frame or a fiberglass hardtop. The cover runs up under the top and around its supports, so the roof stays exposed. On the 230 the fiberglass hardtop was standard; if yours was ordered with the hardtop delete or the sun top instead, contact us before ordering.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,050.00  ·  9oz $1,300.00  ·  Sunbrella $1,560.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Everglades 230 T-Top Boat Cover — Custom-Fit for the 23’7″ Everglades 230 CC

Everglades Boats builds in Edgewater, Florida; it was founded in 1997 by Bob Dougherty, the former Boston Whaler designer who had earlier started EdgeWater, and it molds every hull with its patented RAMCAP process, which bonds the fiberglass hull and liner around a pre-molded closed-cell urethane foam core. The 230 CC is Everglades’ 23-foot family-and-fishing center console, with listings from 2009 and factory spec sheets through the 2017 model year. The 2017 sheet gives it 23’7″ without the engine (24 feet with it), an 8’6″ beam, a 15-inch hull draft, about 3,800 lb without the engine (HMY lists 4,300 lb), 108 to 112 gallons of fuel and a single outboard of up to 300 hp, on a hull with 19 degrees of deadrise at the transom and 36 degrees on average. The fiberglass hardtop on a powder-coated aluminum frame is standard, with LED and spreader lights, an electronics box, four rod holders and a ski pylon, over Everglades’ patented sliding windshield; bridge clearance is 7’7″ with the top. Underneath, a cover has to clear the console with its head compartment and cushioned forward seat, the combination helm seat/leaning post, U-shaped bow seating with a sun-deck insert, a split stainless bow rail, stern seats that fold into a casting platform and two swim platforms flanking the outboard. This T-Top cover is patterned for the 230 CC with its hardtop, and like all of our Everglades boat covers, it’s cut to this hull rather than a generic 23-foot size chart.

How It Fits the 230

The cover runs up to the underside of the hardtop and wraps the frame legs, leaving the roof, electronics box and rod holders exposed. Below, it drapes over the windshield, console and leaning post, spreads forward over the forward console seat, sun-deck insert and U-shaped bow seating to the split bow rail, and falls to the rubrail along the 8’6″ beam. Aft, it covers the folding stern seats and both swim platforms and encloses the outboard in the same piece. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Hardtop or No Top?

This T-Top cover is for a 230 with the hardtop, which was standard. Everglades also offered a hardtop delete, and built the 230 DC dual console on the same 23’7″ length and 8’6″ beam; if your boat has no hard top, see our Everglades 230 DC cover, a full-boat style that goes over everything.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the newer 23-foot model, see the Everglades 235 CC T-Top cover.

Sign up for updates and information about our business