Everglades 325 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Everglades 325 Specifications

  • Builder: Everglades Boats (Edgewater, FL)
  • Model Years: 2009–2019 (320 CC in 2009–2011)
  • Length: 32'4" without engines (35' with)
  • Beam: 10'8"
  • Draft: 24" (hull)
  • Weight: About 9,000 lb without engines
  • Fuel Capacity: 327 gal
  • Max Power: 700 hp, twin outboards
  • Deadrise: 25° at the transom
  • Cover Shipping Weight: 47 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Hardtop frame, windshield, console, forward bench, bow seating and table, tackle station, stern seats and twin outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 47 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The Everglades 325 CC center console, with its integrated hardtop. It is not cut for the newer 335 CC or the 35-foot 350 and 355 CC.
HMY treats the 320 CC of 2009–2011 as the same boat under its earlier name. Because details changed over the run, send us photos or your hull ID if you own a 320 so we can confirm the fit.
Raise the hydraulic glass windshield to its closed, upright position before covering. The cover is shaped around the windshield and hardtop as they sit when closed, and that keeps the panel tight against the glass.
Yes. The stern section is cut to wrap both outboards as part of the same cover, so you don't need separate motor covers.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $2,560.00  ·  9oz $2,775.00  ·  Sunbrella $3,270.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Everglades 325 T-Top Boat Cover — Custom-Fit for the Everglades 325 CC Center Console

Everglades Boats builds its boats in Edgewater, Florida, using its patented RAMCAP (Rapid Molded Core Assembly Process) construction, in which molded foam modules are bonded into the hull and deck to form one solid piece. The 325 CC is Everglades’ 32-foot twin-outboard center console; HMY’s guide covers it from 2009, when it was sold as the 320 CC, to 2019, and Florida Sportsman reviewed the 325 in 2011. Florida Sportsman and factory specs give it 32’4″ without engines (35′ with), a 10’8″ beam, a 24-inch hull draft, about 9,000 lb without engines, 327 gallons of fuel and 25 degrees of deadrise at the transom (41 average), rated for 700 hp on twin Yamaha 300s or 350s. The features a cover has to clear include the integrated hardtop and console — larger than on earlier Everglades, with an electronics box, LED and spreader lights, rod holders across the back and life-jacket storage — the patented curved glass windshield that opens hydraulically at the push of a button, a two-person bench ahead of the console, bow seating around an electric table that converts to a sun lounge, a tackle station with a sink and eight drawers, folding stern seats, a wide stern door and 18-foot outriggers; bridge clearance is 8’9″ with the hardtop. This T-Top cover is patterned for the 325 CC with its integrated hardtop, and like all of our Everglades boat covers, it’s cut to this hull rather than a generic 32-foot size chart.

How It Fits the 325 CC

The cover runs up to the underside of the hardtop and closes around its frame and the windshield, leaving the roof, rod holders and outrigger bases exposed. It falls over the console and helm seating, spreads forward over the console bench and lowered bow table to the rubrail along the 10’8″ beam, and continues aft over the tackle station and folded stern seats to wrap both outboards in one piece. Lower the bow table first so the fabric lies flat. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

325 or 335?

The 335 CC that followed in 2018 keeps the 32’4″ length and 10’8″ beam, but it carries 306 gallons of fuel instead of 327, adds a port-side boarding door and reworks the console seating and bow, so we list it as its own cover.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the newer 32-footer, see the Everglades 335 CC T-Top cover; for the 35-foot triple-engine model, the Everglades 355 CC T-Top cover.

Sign up for updates and information about our business