Everglades 355 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Everglades 355 Specifications

  • Builder: Everglades Boats (Edgewater, FL)
  • Model Years: About 2012–2019 (350 CC before, 365 CC from 2020)
  • Length: 35'4" without engines (38' with)
  • Beam: 10'8"
  • Draft: 24" (hull)
  • Weight: About 9,500 lb without engines
  • Fuel Capacity: 411 gal
  • Max Power: 1,050 hp, triple outboards
  • Deadrise: 25° at the transom
  • Cover Shipping Weight: 50 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or 7oz polyester
  • Coverage: Hardtop frame, windshield, console and helm, bow seating and table, fighting seat, stern seats and triple outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 50 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The Everglades 355 CC center console, the 35-footer sold after the 350 CC, with its standard hardtop. Tell us if yours is the 355 CCX with the expanded top.
No. Sunbrella isn't offered on the 355 CC cover. Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty protection or 7oz polyester (Black) for budget-friendly coverage.
The cover stops at the underside of the hardtop, so a second station or crow's nest above it stays outside the cover. Mention it when you order so we can check the fit around its supports.
The stern is cut to wrap the outboards as part of the same cover. Because this model was sold with both twin and triple outboards, tell us your engine setup when you order so we can confirm the fit.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or 7oz polyester (Black) for budget-friendly coverage. Solution-dyed fabric has the color built into the fiber, so it resists fading and won't bleed onto gelcoat or cushions.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz and 5 years on 9oz). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $2,970.00  ·  9oz $3,220.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Everglades 355 T-Top Boat Cover — Custom-Fit for the Everglades 355 CC Center Console

Everglades Boats builds its boats in Edgewater, Florida, using its patented RAMCAP (Rapid Molded Core Assembly Process) construction, in which molded foam modules are bonded into the hull and deck to form one solid piece. The 355 CC is the name Everglades gave its 35-foot center console after the 350 CC of 2007 to 2011; Florida Sportsman reviewed it in 2013, factory specs run through 2019, and HMY notes it became the 365 CC in 2020. Factory specs give it 35’4″ without engines (38′ with), a 10’8″ beam, a 24-inch hull draft, about 9,500 lb without engines, 411 gallons of fuel and 25 degrees of transom deadrise (41 average), rated for 1,050 hp; the listed packages are triple Yamaha 300s or 350s. The features a cover has to clear include the fiberglass hardtop on an aluminum frame with LED and spreader lights and rod holders, the hydraulic sliding tempered-glass windshield, forward console seating, bow seating around an electric table that converts to a sun pad, a folding fighting seat with gimbal, folding stern seats, a 158-square-foot cockpit, two livewells (31 and 50 gallons) and 18-foot outriggers; bridge clearance is 8’10” with the hardtop, and a full or sport second station or crow’s nest was optional. This T-Top cover is patterned for the 355 CC with its hardtop, and like all of our Everglades boat covers, it’s cut to this hull rather than a generic 35-foot size chart.

How It Fits the 355 CC

The cover runs up to the underside of the hardtop and closes around its frame and the windshield, leaving the roof, rod holders, outriggers and any second station exposed. It falls over the console and helm, spreads forward over the console seat and lowered bow table to the rubrail along the 10’8″ beam, and continues aft over the fighting seat and folded stern seats to wrap all three outboards in one piece. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

355 CC or 355 CCX?

Everglades also offered a 355 CCX with an expanded hardtop whose support legs run to the gunwales fore and aft. That top changes where the cover meets the frame, so if your boat is a CCX, tell us when you order and send photos so we can confirm the fit.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or a lighter 7oz fabric for budget-friendly coverage. Both options are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3 years on 7oz and 5 years on 9oz fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the same boat under its earlier name, see the Everglades 350 CC T-Top cover; for the twin-engine 32-footer, the Everglades 335 CC T-Top cover.

Sign up for updates and information about our business