Custom Fit Boat Covers for SeaVee Boats
A SeaVee is a premium, built-to-order offshore center console — each hull spec'd to its owner, from the Classic V line to the stepped-hull SeaVee Z series. A boat built that deliberately deserves a cover cut to match, not a generic tarp. Our custom SeaVee boat covers are patterned to your exact model and year — from a 290B to a 450Z — for a snug fit that shields your console, helm, and rigging between offshore runs.
SeaVee Models We Cover
SeaVee Boat Cover Features and Benefits
Cut to your exact SeaVee model and year, including a T-top or hard-top, so the cover fits clean instead of draping loose like a universal cover.
Solution-dyed marine fabric stands up to brutal offshore sun, salt, and humidity without fading, protecting your investment season after season.
A water-repellent finish helps rain and spray sheet off instead of pooling, while breathable construction limits trapped moisture and mildew.
Every SeaVee cover is custom cut and sewn to order in the USA with reinforced seams, secure tie-downs, and a tailored fit.
About SeaVee Boats
SeaVee Boats was founded in 1974 in the Miami area by Captain Don McGee and has been building high-performance, outboard-powered center consoles ever since, today out of Medley, Florida. Every SeaVee is built to order to each customer’s spec, which is why the brand is a favorite among serious offshore anglers. The lineup runs from roughly 27 to 45 feet and includes the Classic V models (such as the 290B, 320B, 340B, and 390B) and the patented stepped-hull SeaVee Z series (322Z, 340Z, 370Z, 400Z, 420Z, and 450Z), plus the 270Z bay boat.
Why Protect Your SeaVee with a Custom Cover?
A high-end offshore console represents a serious investment, and sun, salt, and rain go to work on it the moment it stops running. UV fades gelcoat and upholstery, salt corrodes hardware and electronics, and standing water breeds mildew. A snug cover shields the console, helm, seating, and rigging on the trailer, at the slip, or in storage — protecting both condition and resale value.
Custom-Fit vs. Generic Covers
A universal cover sits loose, flaps at highway speed, and traps moisture against the gelcoat. Our SeaVee covers are patterned to your specific model and year for a tailored fit that sheds water, resists wind, and stays put — the kind of fit a custom-built boat deserves.
Built for a Custom Offshore Console
Because every SeaVee is spec’d individually, two of the same model can carry very different T-tops, hard-tops, and rigging — details a flat, generic cover never accommodates. We pattern to your exact hull and configuration so the cover fits clean over your setup, even on older SeaVee hulls the factory no longer supports.
Features of Our SeaVee Boat Covers
Each cover is crafted from marine-grade, UV-resistant fabric chosen to handle sun, salt, and humidity without fading or cracking. Reinforced stitching, tailored seams, and secure tie-downs keep it snug and quiet on the road, while a water-repellent finish helps rain and spray run off instead of soaking through.
Ready to Cover Your SeaVee?
Select your model above to start a custom cover built for your exact SeaVee — from a Classic V like the 290B to a Z-series stepped hull like the 400Z or 450Z. Every cover is proudly custom-made in the USA. Not sure of your model, year, or top configuration? Contact us and we’ll help.
Frequently Asked Questions - SeaVee Boat Covers
What SeaVee models do you offer covers for?
We offer custom-fit covers for several SeaVee T-Top models, including the 29 B, 34, 270 Z, and 322 Z.
Are your boat covers waterproof?
Our covers are water-resistant, designed to effectively repel water while still allowing ventilation to prevent mold and mildew.
Can I use the cover while trailering my boat?
Yes, our covers are designed to be used during trailering, offering excellent protection from wind, road debris, and other hazards while transporting your boat.
How do I choose the right cover for my SeaVee boat?
Simply use our cover selector tool to choose the make and model of your SeaVee boat, and it will guide you to the perfect fitting cover.
How should I clean my SeaVee boat cover?
To clean your cover, brush off loose debris, rinse with fresh water, and use a mild soap solution for tough stains. Avoid using harsh chemicals that could damage the fabric.
Which SeaVee models do you make covers for?
We make custom covers across the SeaVee lineup — the Classic V models (such as the 290B, 320B, 340B, 390B), the Z-series stepped hulls (322Z, 340Z, 370Z, 400Z, 420Z, 450Z), and the 270Z bay boat. Tell us your model, year, and top configuration and we'll match the right pattern.
I have an older SeaVee — can you still cover it?
Yes. SeaVee hulls are built to last for decades, and we pattern covers for both current and older models. Give us your model and year and we'll match the correct fit.
My SeaVee has a T-top / hard-top — does that change the cover?
It does. Because each SeaVee is built to order, T-tops, hard-tops, and rigging vary from boat to boat, and each takes a different pattern. Let us know your exact configuration and we'll build the cover to fit it.
Are your SeaVee covers made in the USA?
Yes — every SeaVee cover is custom-made in the USA from marine-grade, water-repellent fabric built to handle offshore sun and salt.
Helpful boat cover guides
New to ordering? These walk you through it: the Boat Cover Buyer’s Guide (which cover you need and every option explained), the Fabric Guide (7oz vs 9oz vs Sunbrella), and How to Measure if your model isn’t listed. T-Top or open console? See T-Top Covers and Center Console Covers.