Our World Cat boat covers are custom-patterned for 20 World Cat models, from the 230 CC to the 400 CC-X. World Cat has built twin-hull power catamarans in North Carolina since 1998, and every cover we make for them is cut to fit both hulls. We make T-Top covers for 19 models and a Center Console cover for the 230 DC, all made in the USA from marine-grade, water-repellent fabric.
T-Tops: 230 CC, 230 DC, 230 SD, 235 CC, 235 TE, 235 HB, 255 DC, 260 CC-X, 260 DC-X, 265 CC-X, 266 SC, 266 SF, 280 CC-X, 280 DC-X, 295 CC, 296 DC, 325 CC, 400 CC-X, 2740
Center Console: 230 DC
Every World Cat cover is cut to the pattern for its model and tailored around both hulls, the console, the top and the seating so it fits without flapping or pooling.
Marine-grade, UV-resistant fabric stands up to sun, salt and humidity and helps resist fading and mildew.
On the trailer, on a lift or in storage, your cover shields the helm, electronics and upholstery from UV, rain, dust and bird droppings.
Reinforced tie-downs and a tailored cut make the cover simple to put on and take off. Proudly custom-made in the USA.
The first World Cat was built in Greenville, North Carolina, in 1998. The company is now based in Tarboro, North Carolina, with a second plant in Greenville, and builds outboard-powered catamarans in center console and dual console layouts. In 2009 World Cat acquired Glacier Bay, another catamaran builder, and later sold boats such as the 2740 as Glacier Bay Editions. Several of the models we cover, such as the 230 CC, 255 DC and 266 SF, are no longer built.
UV, salt air, rain and bird droppings fade gelcoat, stain upholstery and wear on electronics. A fitted cover shields the helm, seating and deck while your boat sits on its trailer, on a lift or in storage, helping keep your World Cat in good condition.
A generic cover is made for a single hull, so on a catamaran it sits loose, traps moisture and flaps in the wind. Our World Cat covers are cut to the pattern for each model, so they fit snugly, shed water and stay put.
Each cover is hemmed along the rubrail around both hulls and leaves the tunnel between them open. The twin outboards sit under one loose drape at the stern. T-Top covers are cut to fit around the top and its frame; the 230 DC Center Console cover is for a boat with no top.
Each cover is made from marine-grade, UV-resistant fabric for sun, salt and humidity. Reinforced stitching, tailored seams and tie-downs keep it snug, while a water-repellent finish helps rain run off instead of soaking through.
Select your model above to start your custom World Cat cover. Every cover is custom-made in the USA. If you’re not sure which model you have, contact us and we’ll help.
We make T-Top covers for the World Cat 230 CC, 230 DC, 230 SD, 235 CC, 235 TE, 235 HB, 255 DC, 260 CC-X, 260 DC-X, 265 CC-X, 266 SC, 266 SF, 2740, 280 CC-X, 280 DC-X, 295 CC, 296 DC, 325 CC and 400 CC-X, and a Center Console cover for the 230 DC.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn't made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.
The cover is hemmed along the rubrail around both hulls and leaves the tunnel between them open. The twin outboards sit under one loose drape at the stern, with the lower units exposed.
Choose the T-Top cover if your World Cat has a T-top or hardtop; it is cut to fit around the top and its frame. Choose the Center Console cover if your 230 DC has no top.
Most World Cat T-Top covers come in 7oz or 9oz marine polyester or Sunbrella acrylic; the 325 CC and 400 CC-X covers come in 7oz or 9oz only. The 230 DC Center Console cover comes in 9oz solution-dyed marine fabric or Sunbrella.
Our covers are water-repellent and breathable. They shed rain while letting moisture escape, which helps prevent mold and mildew under the cover.
Brush off loose dirt, rinse with fresh water and use a mild soap for tougher spots. Let the cover dry fully before storing it, and avoid harsh chemicals and bleach.
Every cover is made to order, so please allow 1 to 3 weeks before it ships. Shipping is a $30 flat rate within the US.
Yes. Every World Cat cover is custom-made in the USA from marine-grade, water-repellent fabric.
New to ordering? These walk you through it: the Boat Cover Buyer’s Guide (which cover you need and every option explained), the Fabric Guide (7oz vs 9oz vs Sunbrella), and How to Measure if your model isn’t listed. T-Top or open console? See T-Top Covers and Center Console Covers.