Nautic Star 2500 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

NauticStar 2500 Specifications

  • Builder: NauticStar Boats (Amory, Mississippi)
  • Model Years: About 2012 to 2017
  • Length: 25'
  • Beam: 8'6"
  • Weight: About 4,000 lb
  • Fuel Capacity: 150 gal
  • Deadrise: 20° aft
  • Max Power: 350 hp single or 400 hp twin
  • Top: Optional fiberglass T-top
  • Cover Shipping Weight: 35 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: T-top supports, head console and windshield, bow seating, leaning post, rear bench, transom and outboard(s)
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 35 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The 2500 XS Offshore — 25' with an 8'6" beam — fitted with a T-top. Please give us your model year and tell us whether you run one outboard or two so we can confirm the fit.
No. The 25 XS is a later NauticStar 25-footer with its own layout and a standard integrated T-top, and we keep a separate pattern for each. Choose the name on your hull or paperwork.
Our T-Top style is made for any boat with a hard top — an aluminum T-top frame with a canvas roof, a powder-coated frame, or a fiberglass top. The cover runs up under the top and around its supports, so the roof stays exposed. The T-top was an option on the 2500, so tell us which top your boat has when you order.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,425.00  ·  9oz $1,600.00  ·  Sunbrella $1,920.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

NauticStar 2500 T-Top Boat Cover — Custom-Fit for the 2500 XS Offshore

NauticStar Boats was founded in 2002 by Phil Faulkner in Amory, Mississippi, which was still home to its headquarters and factory when MasterCraft bought the company in October 2017; MasterCraft sold the NauticStar business to Iconic Marine Group in September 2022. The 2500 — the 2500 XS Offshore, also reviewed as the 2500 Offshore — is NauticStar’s earlier 25-foot offshore center console, with listings from about 2012 to 2017. It measures 25′ with an 8’6″ beam and weighs about 4,000 lb; it carries 150 gallons of fuel, has 20 degrees of deadrise aft, and is rated for a single outboard to 350 hp or twins to 400 hp combined. A fiberglass T-top was an option rather than standard. The head console has a walk-in dressing room, a curved windshield, an in-console cooler and four rod holders; behind it the leaning post carries a baitwell and tackle center. Up front are cushioned bow seating, two 20-gallon fish boxes and cast-net storage, and aft there are a 45-gallon fish box, a 25-gallon baitwell, an aft bait-prep station and a folding rear bench with a flip-down stern seat. This T-Top cover is patterned for the 2500 XS with its T-top, and like all of our NauticStar boat covers, it’s cut to this hull rather than a generic 25-foot size chart.

How It Fits the 2500

The cover runs up to the underside of the T-top and wraps its supports, so the roof stays exposed. Below it the cover drapes over the windshield and head console, the bow seating, then the leaning post and folding rear bench, and falls to the rubrail along the 8’6″ beam. Aft, it covers the bait-prep station and transom and wraps the outboard or twin outboards in the same piece. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. Later 25-footers: the NauticStar 25 XS T-Top cover and the NauticStar 2602 T-Top cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })