Sea Vee 34 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Sea Vee 34 Specifications

  • Builder: SeaVee Boats, Miami, Florida
  • Type: Offshore center console
  • Also Called: SeaVee 340
  • Length: 34'9"
  • Beam: 10'
  • Fuel: About 350 gal
  • Power: Twin or triple outboards, or single or twin inboard diesels
  • Hull Versions: 340B classic deep-V or 340Z twin-stepped
  • Cover Shipping Weight: 49 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or 7oz polyester
  • Coverage: Fits up under the T-top or hardtop and covers the console, leaning post, bow, cockpit and transom, draping over the outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 49 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's patterned for the SeaVee 34-foot center console, sold as the 340: 34'9" long with a 10-foot beam and a T-top or hardtop. Because the same boat turns up as the 34, 340, 340B and 340Z, please confirm your model and year, your hull type, your engine setup and which top you have when you order so we can check the pattern before we cut.
The 340B is SeaVee's classic deep-V hull and the 340Z is its twin-stepped hull. They share the same length and beam, but the deck, livewells and storage are laid out a little differently. Choose the B or Z page if you know your hull type; use this page if your boat is listed only as a SeaVee 34 or 340.
The cover runs aft over the transom and falls as one loose drape over all of the outboard cowlings together; there are no separate fitted engine pockets, and the lower units stay exposed below the hem. Tilt the engines down so the fabric hangs evenly, and tell us how many outboards your boat has when you order.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. SeaVee offers a pipe-frame T-top or a molded fiberglass hardtop, and some boats carry an upper station or tower instead. If your top carries outriggers, a rocket launcher, a shade extension or a second station, mention them when you order so we can check the fit. Tell us which top your SeaVee 34 has when you order so we can check it against the pattern.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or 7oz polyester (Black) for budget-friendly coverage. Solution-dyed fabric has the color built into the fiber, so it resists fading and won't bleed onto gelcoat or cushions.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz and 5 years on 9oz). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $2,860.00  ·  9oz $3,100.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Sea Vee 34 T-Top Boat Cover — Custom-Fit for the SeaVee 34-Foot Center Console

SeaVee Boats builds semi-custom offshore center consoles in Miami, Florida. Its 34-foot center console is sold as the 340, and brokers often list it simply as the SeaVee 34; one boat we found is listed as a “34 CC” by one broker and a “340B Open” by another. HMY’s guide lists the 340 at 34’9″ long with a 10-foot beam and about 350 gallons of fuel, offered with twin or triple outboards or with single or twin inboard diesels. SeaVee sorts its boats into two families: the B Series, its classic deep-V hulls, and the Z Series, built on a twin-stepped, cross-ventilated hull. SeaVee has built the 340 both ways, as the 340B and the 340Z, and both share the 34’9″ length and 10-foot beam. Typical boats have a T-top or fiberglass hardtop over a front-entry console, a leaning post with a tackle station or slide-out cooler, in-deck fish boxes, a transom livewell and a transom door. This T-Top cover is patterned for the SeaVee 34 with its T-top, and like all of our SeaVee boat covers, it’s cut to this hull rather than a generic 34-foot size chart.

How It Fits the SeaVee 34

The cover runs up to the underside of the T-top or hardtop and wraps its legs, so the roof stays exposed. Below it, the cover takes in the console, windshield and leaning post, then runs forward over the bow and any forward seating to the stem, falling to the rubrail along the 10-foot beam. Aft, it covers the cockpit and transom livewell, then falls as one loose drape over the outboards, twin or triple, with the lower units exposed. Take off loose cushions first. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Which 34 Do You Have?

We also offer separate Sea Vee 34 B and 34 Z pages. If your paperwork names the hull type, choose that page; if it just says SeaVee 34 or 340, this page is the place to start. Inboard-diesel 34s have no outboards hanging off the transom, so tell us if yours is an inboard. If you aren’t sure, check the model name and hull type on your registration, hull paperwork or original build sheet.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or a lighter 7oz fabric for budget-friendly coverage. Both options are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3 years on 7oz and 5 years on 9oz fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the hull-specific versions, see our Sea Vee 34 B T-Top cover and Sea Vee 34 Z T-Top cover.

Sign up for updates and information about our business