Blackwater 23 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Blackwater 23 Specifications

  • Length: 23'
  • Beam: 9'2"
  • Draft: About 14"
  • Dry Weight: About 5,500 lb
  • Fuel Capacity: 105 gal
  • Fresh Water: 15 gal
  • Power: Single outboard (boats seen with a Mercury 300 V8 or 400 V10 Verado)
  • Hull: Fiberglass modified-V
  • Top: Oversized hardtop (standard)
  • Cover Shipping Weight: 33 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Runs up to the underside of the hardtop, wraps the frame legs, and covers the console, seating, decks and outboard; hardtop roof stays exposed
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 33 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The Blackwater 23 Bay — 23 feet long with a 9'2" beam and the factory oversized hardtop. Some dealers have listed the same boat as the Blackwater 23 Hybrid; it's the same 23-foot, 9'2" boat. If yours has been modified, send us your year and a photo before ordering.
Yes. The 23 comes with an oversized hardtop, and this cover is made for it: it runs up to the underside of the top and wraps the frame legs, so the roof stays uncovered.
Not the trolling motor. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn't made to go over one, and the order form will ask you to confirm you'll remove it. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them. Jack plates and outriggers change the fit at the stern and top, so mention them when you order.
No. The 43 Luxury Fish is a much larger boat with an 11'11" beam and quad outboards. We make a separate Blackwater 43 Luxury Fish T-Top cover for it.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,050.00  ·  9oz $1,300.00  ·  Sunbrella $1,560.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Blackwater 23 T-Top Boat Cover — Custom-Fit for the Blackwater 23 Bay With Its Hardtop

The Blackwater 23 Bay is the smallest boat in the Blackwater line — a 23-foot fishing boat the builder describes as blending center console versatility with bay boat agility, and which some dealers have listed as the 23 Hybrid. Blackwater builds its boats factory-direct in a 120,000-square-foot plant in Miami, and its current lineup runs from the 23′ Bay up through the 36′ Sport and Sportfish, the 41′ Performance Fish and Tournament Edition, and the 43′ Luxury Fish. The 23 measures 23 feet long with a broad 9’2″ beam, draws about 14 inches, weighs about 5,500 lb dry and carries 105 gallons of fuel and 15 gallons of fresh water on a fiberglass modified-V hull, with a single outboard on the transom — boats on the market have carried Mercury Verados from a 300 V8 up to a 400 V10. Standard equipment includes an oversized hardtop, dual livewells, insulated fish boxes with floor storage, rod storage lockers, a bow storage box, and a helm bench seat with a cushioned cooler ahead of the console. This T-Top cover is patterned for the Blackwater 23 with its hardtop, and like all of our Blackwater boat covers, it’s cut to this hull rather than a generic 23-foot size chart.

How It Fits the Blackwater 23

The cover runs up to the underside of the oversized hardtop and wraps around its powder-coated frame legs, then drapes over the console and windshield, the helm seating and the forward cooler seat, down across the bow and aft decks to the gunwales, and continues aft over the outboard as one piece; the hardtop roof and its lights stay exposed. The 23’s 9’2″ beam is wide for its length, and the pattern is cut for that fuller deck rather than borrowed from a narrower 23-foot bay boat. Remove a bow trolling motor before covering. Mention a jack plate or outriggers when you order. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the flagship of the line, see the Blackwater 43 Luxury Fish T-Top cover.

Sign up for updates and information about our business