Parker 180 Coastal T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Parker 180 Coastal Specifications

  • Builder: Parker Boats (Beaufort, NC)
  • Length: 18' (20'5" overall)
  • Beam: 8'
  • Draft: About 9"
  • Deadrise: 14° at transom
  • Dry Weight: About 2,706 lb
  • Fuel: 40 gal
  • Power: Single outboard, 115–150 hp packages
  • Construction: Fiberglass liner, Coosa transom and gunwales
  • Cover Shipping Weight: 25 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Runs up to the underside of the T-top, wraps the legs, and covers the console, seating, leaning post, bow, jump seats and outboard cowling; top stays exposed
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 25 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's made for the Parker 180 Coastal — 8' beam, 20'5" overall — with a T-top. Parker's description of the 180 Coastal also calls it the 18 SE, and the published specs match, so 18 SE owners should contact us to confirm. Please confirm your model year and which top you have when you order so we can check the pattern before we cut.
No. The 18 SE and 180 Coastal are about 6 inches longer and 6 inches wider than the 1801, with more freeboard and a bigger console. For an 1801, choose our Parker 1801 T-Top or 1801 Center Console cover.
The cover runs over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem.
Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn't made to go over one.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $790.00  ·  9oz $975.00  ·  Sunbrella $1,175.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Parker 180 Coastal T-Top Boat Cover — Custom-Fit for the Parker 180 Coastal (18 SE)

Parker Boats builds its fiberglass fishing boats in Beaufort, North Carolina, an area known for more than two centuries of hand-built boats. The 180 Coastal is the current 18-footer in Parker’s lineup, and Parker’s own description of it still calls the boat the 18 SE. It is listed at 18′ with 20’5″ overall, an 8′ beam, about 9 inches of draft, 14 degrees of deadrise at the transom and a dry weight of about 2,706 lb, with 40 gallons of fuel and single Yamaha outboards from 115 to 150 hp. The modified-V hull is built with a fiberglass liner and Coosa transom and gunwales. The bow is a flush deck as standard, with an optional forward platform that has recessed storage and a removable cushion. Standard gear includes an anodized aluminum leaning post with rocket launcher, a forward console seat over an insulated livewell, a windshield with grab rail, stern jump seats with hinged lids and backrests, an anchor locker and a swim platform with ladder. A bimini and a soft T-top have both been offered. This T-Top cover is patterned for the Parker 180 Coastal with its T-top, and like all of our Parker boat covers, it’s cut to this hull rather than a generic 18-foot size chart.

How It Fits the Parker 180 Coastal

The cover runs up to the underside of the T-top and wraps its legs, so the top stays exposed. Below it the cover takes in the console and windshield, the forward console seat and the leaning post, then runs over the flush bow or forward platform to the stem, falling to the rubrail along the 8′ beam. Aft, it covers the jump seats and transom and falls as one loose drape over the outboard cowling, with the lower unit exposed. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Not the Same Boat as the 1801

The 18 SE replaced Parker’s 1801 Center Console and is a bigger boat: about 6 inches longer, 6 inches wider and 6 inches deeper, with a larger console. A cover cut for one won’t fit the other, so check which 18-footer you own before ordering.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the earlier 18-footer, see our Parker 1801 T-Top cover; for the next size up, see the Parker 21 SE T-Top cover.

Sign up for updates and information about our business