Robalo 360 R Specifications
- Builder: Robalo Boats, Nashville, Georgia
- Type: Offshore center console with cabin, twin or triple outboards
- Length: 36'6"
- Beam: 11'4"
- Deadrise: 23° at the transom
- Weight: About 14,500 lb with power
- Fuel: 350 gal
- Power: Twin or triple outboards, up to 1,200 hp
- Cover Shipping Weight: 46 lbs
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or 7oz polyester
- Coverage: Fits up under the hardtop and covers the console, helm seating, bow seating, cockpit and transom, draping over the outboards
- Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
- Protection: UV-resistant, water-repellent, breathable
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 46 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's patterned for the Robalo R360 center console: the 36'6" boat with an 11'4" beam, a fiberglass hardtop and a cabin under the console. Please confirm your model and year, your engine setup and which top you have when you order so we can check the pattern before we cut.
The cover runs aft over the transom and falls as one loose drape over all of the outboard cowlings, whether your boat has twins or triples; there are no separate fitted engine pockets, and the lower units stay exposed below the hem. Tilt the engines down so the fabric hangs evenly.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. The R360 comes with a fiberglass hardtop, and a hardtop enclosure and shade system were offered as options. Tell us which top your Robalo R360 has when you order so we can check it against the pattern.
Yes. The cover runs up under the hardtop and down over the bonded front and side glass, the console and the helm seating, then continues to the bow and the transom. If your boat has an aftermarket enclosure or outriggers on the hardtop, tell us when you order.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or 7oz polyester (Black) for budget-friendly coverage. Solution-dyed fabric has the color built into the fiber, so it resists fading and won't bleed onto gelcoat or cushions.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz and 5 years on 9oz). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $3,080.00 · 9oz $3,340.00 — your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Robalo 360 R T-Top Boat Cover — Custom-Fit for the Robalo R360 Center Console
Robalo Boats builds its saltwater fishing boats in Nashville, Georgia, alongside sister brand Chaparral. The R360 is the largest center console in this group: 36’6″ overall with an 11’4″ beam, 23 degrees of transom deadrise, 350 gallons of fuel and about 14,500 lb with power. It runs twin or triple outboards up to 1,200 hp; test boats carried triple Yamaha F300s, and Mercury power was offered too. A fiberglass hardtop on a powder-coated frame has an overhead skylight, an electronics box and spreader lights, with front and side glass bonded below it. The bow has a raised U-shaped lounge with chaise seats, a console lounge for two and a table, and stowing the cushions makes a casting platform. The console holds a mini-cabin with a berth and an electric head. Behind the three-across helm seat is an aft-facing bench with a cooler, then twin 30-gallon livewells flanking a transom seat that folds flush, plus two in-deck fish boxes. This T-Top cover is patterned for the Robalo R360 with its hardtop, and like all of our Robalo boat covers, it’s cut to this hull rather than a generic 36-foot size chart.
How It Fits the Robalo R360
The cover runs up to the underside of the hardtop and wraps its frame, so the roof stays exposed. Below it, the cover takes in the glass enclosure, console and helm seating, then runs forward over the console lounge and bow seating to the stem, falling to the rubrail along the 11’4″ beam. Aft, it covers the aft bench and transom and falls as one loose drape over the outboards, with the lower units exposed. Fold the transom seat flush and lower the bow table first. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or a lighter 7oz fabric for budget-friendly coverage. Both options are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3 years on 7oz and 5 years on 9oz fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For a smaller twin-engine Robalo, see our Robalo 302 T-Top cover; for Robalo’s dual console, see the Robalo 317 DC T-Top cover.