Sea Vee 34 Z T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Sea Vee 34 Z Specifications

  • Builder: SeaVee Boats, Miami, Florida
  • Type: Offshore center console, Z Series twin-stepped hull
  • Length: 34'9" overall
  • Beam: 10'
  • Hull Draft: 20"
  • Deadrise: 23.5°
  • Weight: 7,950 lb without engines
  • Fuel: 364 gal plus 87 gal auxiliary
  • Power: Twin or triple outboards
  • Cover Shipping Weight: 49 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or 7oz polyester
  • Coverage: Fits up under the T-top or hardtop and covers the console, leaning post, bow, cockpit and transom, draping over the twin or triple outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 49 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's patterned for the SeaVee 340Z, the twin-stepped 34-footer: 34'9" overall with a 10-foot beam, on twin or triple outboards. The 340B and the plain SeaVee 34 have their own pages, so please confirm your model and year, your engine setup and which top you have when you order so we can check the pattern before we cut.
Not without checking. SeaVee describes the 350Z as the next generation of the 340Z, but it is 35'6" overall with a new console, helm and seating, so it doesn't share this pattern. Contact us before ordering for a 350Z.
The cover runs aft over the transom and falls as one loose drape over all of the outboard cowlings together; there are no separate fitted engine pockets, and the lower units stay exposed below the hem. Tilt the engines down so the fabric hangs evenly, and tell us how many outboards your boat has when you order.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. SeaVee offers a pipe-frame T-top or a molded fiberglass hardtop, and some boats carry an upper station or tower instead. If your top carries outriggers, a rocket launcher, a shade extension or a second station, mention them when you order so we can check the fit. Tell us which top your 340Z has when you order so we can check it against the pattern.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or 7oz polyester (Black) for budget-friendly coverage. Solution-dyed fabric has the color built into the fiber, so it resists fading and won't bleed onto gelcoat or cushions.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz and 5 years on 9oz). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $2,860.00  ·  9oz $3,100.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Sea Vee 34 Z T-Top Boat Cover — Custom-Fit for the SeaVee 340Z Stepped-Hull Center Console

SeaVee Boats builds semi-custom offshore center consoles in Miami, Florida. SeaVee sorts its boats into two families: the B Series, its classic deep-V hulls, and the Z Series, built on a twin-stepped, cross-ventilated hull. The 340Z was the stepped-hull version of its 34-footer, with a larger bow; SeaVee is now developing the 350Z as its next generation. SeaVee lists the 340Z at 34’9″ overall with a 10-foot beam, a 20-inch hull draft, 23.5 degrees of deadrise, a 7,950 lb weight without engines and 364 gallons of fuel plus an 87-gallon auxiliary tank, on twin or triple outboards. These boats were built with a 60-gallon transom livewell, an integrated platform with transom door, insulated fish boxes and a front-entry console, with options such as a T-top or molded hardtop, upper stations, outriggers, a slide-out cooler under the leaning post and molded forward seating. This T-Top cover is patterned for the SeaVee 340Z with its T-top, and like all of our SeaVee boat covers, it’s cut to this hull rather than a generic 34-foot size chart.

How It Fits the SeaVee 340Z

The cover runs up to the underside of the T-top or hardtop and wraps its legs, so the roof stays exposed. Below it, the cover takes in the console, windshield and leaning post, then runs forward over the larger Z bow and any forward seating to the stem, falling to the rubrail along the 10-foot beam. Aft, it covers the cockpit and transom livewell, then falls as one loose drape over the twin or triple outboards, with the lower units exposed. Take off loose cushions first. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Not the Same as the 340B or 350Z

The 340B shares the 340Z’s length and beam but sits on SeaVee’s classic deep-V hull with a different bow and deck, and the newer 350Z is 35’6″ with an all-new console, so each has its own pattern. If you aren’t sure which you own, check the model name and hull type on your registration, hull paperwork or original build sheet.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or a lighter 7oz fabric for budget-friendly coverage. Both options are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3 years on 7oz and 5 years on 9oz fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the deep-V version, see our Sea Vee 34 B T-Top cover; for the next Z size up, see the Sea Vee 37 Z T-Top cover.

Sign up for updates and information about our business