Sea Hunt 24 Edge — Quick-Reference Specs
- Boat Model: Sea Hunt 24 Edge
- Cover Type: T-Top Mooring Cover
- LOA: 24' 3"
- Beam: 8' 6"
- Dry Weight: ~4,400 lbs
- Engine: Yamaha F300XCA (standard)
- Fuel Capacity: 96–98 gallons
- Deadrise: 18°
- Hull Type: Deep-vee with sharp entry and wide chines
Cover Features
- Fit: Custom-fitted for the Sea Hunt 24 Edge T-top
- Attachment: Underside edges of factory T-top frame
- T-Top Roof: Stays fully exposed
- Coverage: 85–90% of hull sides, fully enclosing the outboard engine
- Fabric Options: 9oz marine canvas (most popular) or Sunbrella
- Construction: Reinforced stitching at all stress points with stainless snaps
- Warranty: Multi-year warranty against UV and weather damage
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 34 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The Edge 24 runs an 18-degree modified-V deadrise, which creates a deeper hull profile than flatter bay boats in the 12-15 degree range. Our cover pattern accounts for this sharper V-shape at the keel with extra fabric depth along the centerline and tapered side panels that follow the hull flare outward toward the chine. The result is a snug wrap rather than loose pooling at the bottom of the hull.
Yes. The 96-gallon tank sits beneath the deck inside the hull, so it has no effect on the exterior cover profile. The Edge 24's 3,400-pound dry weight actually works in your favor because the boat sits firmly on the trailer, giving the cover a stable, low-mound drape without shifting or rocking during wind gusts.
We recommend trimming the engine down to its resting position. The Edge 24 supports up to 300 HP, and trimming up raises the cowling above the cover's engineered drape line, creating unnecessary stress on the rear fabric pouch. With the engine trimmed down, the loose baggy engine pouch envelops the cowling naturally with plenty of clearance.
It does. Sea Hunt's signature Carolina Bow Flare gives the Edge 24 a wider, more pronounced forward hull shape compared to standard center consoles. Our pattern adds extra fabric width in the bow section to match this flare geometry, so the cover follows the hull contour cleanly without bunching at the bow rail or leaving exposed gaps where UV and rain can reach the deck.
The Edge 24 is a single-engine 24-foot center console, which puts it in the sweet spot for solo installation. You drape the cover over the T-top frame, work bow-to-stern snapping it along the hull, and finish by positioning the engine pouch. Most owners get it down to 10-15 minutes after a couple of practice runs. The 8-foot-6-inch beam is wide but still within reach from a step ladder on either side.
The cover drapes over the entire cockpit from the T-top frame down, fully enclosing the center console, helm station, and any mounted electronics like fishfinders or GPS units. Because the fabric never contacts the console directly, there is no abrasion against screens or gauges. The T-top roof stays exposed above, which allows airflow that prevents the trapped moisture and condensation that can damage sensitive marine electronics over time.
For full-time outdoor storage near saltwater, we recommend Sunbrella fabric for its superior UV resistance and colorfastness across years of direct sun exposure. Our 9-ounce marine canvas is the most popular option and handles coastal conditions well at a lower price point, with reinforced stitching and stainless snaps at every stress point. Both options resist mildew, salt buildup, and UV degradation, but Sunbrella is the stronger long-term investment if the boat lives outdoors year-round.
A T-top mooring cover attaches to the underside edges of your T-top roof frame and drapes down over the entire cockpit, console, and engine while leaving the T-top roof exposed above. Unlike a full enclosure that seals everything including the roof, our mooring cover allows continuous airflow through the gap at the roof line. This ventilation prevents trapped moisture, mildew, and condensation that damage interiors on fully enclosed boats. It is designed for stationary storage on a trailer or lift, not for use while underway.
Our 9-ounce marine canvas is the most popular option and provides excellent UV protection, water resistance, and durability at a lower price point. Sunbrella is the premium choice with superior colorfastness and longer UV resistance, making it the better investment for boats stored outdoors year-round in intense sun. Both feature reinforced stitching at all stress points and stainless steel snaps. If your Edge 24 lives under a roof or carport, the 9-ounce canvas is a great value. If it sits in direct sun 365 days a year, Sunbrella pays for itself over time.
When you place your order, we collect details about your exact model year, T-top type (factory fiberglass hardtop or aftermarket aluminum frame), T-top dimensions, and engine configuration. This ensures the cover pattern matches your specific setup. If you are unsure about any measurements, our team walks you through it by phone or email. Every cover is custom-fitted to your boat, not a generic one-size-fits-all product.
Sea Hunt 24 Edge T-Top Boat Cover — Full Protection for the Ultimate Crossover
The Sea Hunt 24 Edge is built as the ultimate crossover — equal parts fishing machine, family cruiser, and weekend explorer. This custom-fitted T-top mooring cover matches the Edge 24’s generous 24-foot length and 8’6″ beam, wrapping securely around the oversized T-top frame and draping down to protect 85–90% of the hull sides while fully enclosing the Yamaha F300 outboard.
Premium Features Deserve Premium Protection
The Edge 24 packs amenities most bay boats can’t match: a full head compartment, bow picnic table with backrest, trim tabs, underwater lights, and nearly 100 gallons of fuel capacity. All of that premium hardware sits exposed at the dock without a proper cover. Our T-top cover shields the console, leaning post, bow seating, and cockpit from UV damage, rain, salt spray, bird droppings, and airborne debris — keeping your investment looking showroom-fresh season after season.
Engineered for the Edge 24 Hull
Every cover is patterned specifically for the Sea Hunt 24 Edge, accounting for its deeper freeboard, wider gunwales, and oversized T-top with factory misting system. The cover attaches to the underside edges of the T-top frame with stainless steel snaps — no drilling required. Choose from 9 oz marine-grade canvas (our most popular option) or Sunbrella solution-dyed acrylic, both built to handle years of saltwater UV exposure with reinforced stitching at every stress point.
Fabric and Construction
Whether you’re covering the Edge 24 between weekend runs or storing it for the off-season, this cover is designed for quick on-and-off use — most owners have it secured in under five minutes. Browse our full lineup of T-top boat covers to see what’s available for your fleet, or check out the Sea Hunt 19 XP CC cover and the Sea Hunt 24 BXBR T-Top cover for other popular Sea Hunt models. Every cover ships with a multi-year warranty against UV degradation, seam failure, and hardware corrosion.
Reviews
There are no reviews yet.