Sea Hunt 260 — Quick-Reference Specs
- Boat Model: Sea Hunt 260
- Cover Type: T-Top Mooring Cover
- LOA: 26'0"
- Beam: 9'3"
- Dry Weight: 4,100 lbs
- Engine: Single outboard (max 300 HP)
- Fuel Capacity: 150 gallons
- Deadrise: 21° at transom
- Hull Type: Deep-V fiberglass
Cover Features
- Fit: Custom-fitted for the Sea Hunt 260 T-top
- Attachment: Underside edges of factory T-top frame
- T-Top Roof: Stays fully exposed
- Coverage: 85–90% of hull sides, fully enclosing the outboard engine
- Fabric Options: 9oz marine canvas (most popular) or Sunbrella
- Construction: Reinforced stitching at all stress points with stainless snaps
- Warranty: Multi-year warranty against UV and weather damage
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 36 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The Sea Hunt 260 measures 26 feet LOA with a 9-foot 3-inch beam, a deep-V hull with 21-degree deadrise at the transom, and weighs 4,100 pounds dry. Our cover is patterned specifically for these dimensions — it accounts for the 260's wide beam, aggressive deadrise angle, T-top leg spacing, and console position. The fit drapes from the T-top frame down to enclose approximately 85–90 percent of the hull sides, with no excess material to pool water or catch wind.
Yes. The Sea Hunt 260 accepts up to 300 horsepower — typically a Yamaha F250 or F300 outboard. Our cover extends from the bow past the transom and completely encloses the engine cowling, powerhead, lower unit connection, and all transom mounting hardware. This protects the engine from UV degradation that cracks plastic cowlings, salt corrosion on exposed metal components, and water intrusion during extended storage periods.
The Sea Hunt 260 features a steeper 21-degree deadrise at the transom compared to many other Sea Hunt models. This aggressive hull angle means the sides of the boat drop away at a sharper angle, changing how cover material drapes and tensions along the gunwales. Our cover is patterned specifically for this hull geometry — the strap positions, panel dimensions, and tension points are all calibrated for the 260's steep-V shape. A generic cover designed for a flatter hull will sag, pool water, and leave gaps along the sharper sections.
The cover features a separate zippered section that fits around the T-top support legs. The T-top roof remains fully exposed on top — only the underside edges of the frame serve as attachment points. This lets you install or remove the cover without fighting the hardtop structure. The 260's T-top frame has specific leg spacing and dimensions that differ from smaller Sea Hunt models, and our cover is patterned for this exact configuration.
The 260's 150-gallon fuel tank gives it exceptional offshore range — well over 200 miles at cruising speed. That range means this boat frequently spends extended time in harsh saltwater environments, docked at offshore marinas or stored between long-distance fishing trips. Our Sunbrella marine-grade fabric handles constant salt exposure, blocks UV rays intensified by water reflection, and resists the mold and mildew that thrive in humid coastal storage conditions. A boat built for this kind of range needs protection that can keep up.
Yes. The Sea Hunt 260 typically comes equipped with flush-mounted GPS/fishfinder displays, VHF radio, and additional helm electronics. Our cover provides complete coverage over the entire helm station and console area, shielding all screens from UV exposure that cracks displays and fades LCD panels. The cover also protects waterproof gasket seals from UV degradation — the primary cause of seal failure and water intrusion in marine electronics over time.
Yes. At 4,100 pounds dry weight with a wide 9-foot 3-inch beam, the 260 generates significant wind load during highway transport. Our cover handles it — adjustable tie-down straps run beneath the hull and cinch tight along the gunwales, preventing wind lift at sustained highway speeds. Reinforced stitching at every stress point manages vibration and wind pressure during extended towing. The cover fits flush against the hull to minimize drag and eliminate the flapping that destroys lighter covers over time.
A T-top mooring cover uses your boat's fixed hardtop frame as its primary structural support point. Unlike a full snap-on cover that requires removing the T-top, or a loose universal tarp that sags and collects water, a T-top mooring cover attaches to the underside edges of the hardtop. It drapes down to protect the cockpit, console, and gunwales while the T-top roof stays fully exposed above. A separate zippered section fits around the support legs. This design delivers secure, wind-resistant coverage without the sagging, pooling, and flapping problems of generic alternatives.
We offer three fabric tiers. The 7 oz polyester is our entry-level option with a 3-year warranty, shipping in black — suitable for boats stored under a roof or in mild climates. The 9 oz polyester is our most popular choice among Sea Hunt owners — the denser weave provides superior abrasion resistance and UV protection with a 5-year warranty, available in navy or black. Our premium Sunbrella uses 100% solution-dyed acrylic trusted by marine professionals worldwide, carrying a 6-year fabric warranty in black, smoke, or marine blue. All polyester options use solution-dyed construction so pigment will not bleed onto your gelcoat.
Select your model year, storage method (trailer, lift, dry stack, or dock), T-top type (hardtop, hardtop with aft support bars, or canvas top), engine make and horsepower, and any aftermarket accessories like jack plates or Power Poles. Our design team combines these details with the 260's factory specifications to pattern your cover for a precise fit. If you have modifications that change the cover profile — such as an upgraded engine, non-standard electronics, or aftermarket bow rails — note them in the order comments and our team will adjust the pattern.
Sea Hunt 260 T-Top Boat Cover – Custom Protection for a Capable Offshore Center Console
The Sea Hunt 260 is a proven offshore center console that bridges the gap between nimble bay boats and full-size bluewater machines. At 26 feet long with a 9-foot 3-inch beam, a deep-V hull with 21-degree deadrise, and a 150-gallon fuel tank, the 260 was built for serious offshore range and rough-water capability. Our custom T-top mooring cover is patterned specifically for the 260’s hull dimensions and factory T-top frame — not borrowed from another model and not a universal fit.
Why the Sea Hunt 260 Needs a Model-Specific Cover
At 4,100 pounds dry weight, the 260 is a substantial platform that handles open-ocean conditions with confidence. Its 21-degree deadrise — steeper than many Sea Hunt models — cuts through offshore chop and delivers a softer ride in rough seas, but that aggressive hull angle also means the 260 has a unique shape that generic covers cannot match. The wider 9-foot 3-inch beam, specific T-top leg spacing, console position, and engine cowling profile are all dimensions that require a purpose-built cover. Owners of similar large Sea Hunt platforms like the Sea Hunt 265 Ultra T-Top understand that a one-size-fits-all approach leaves gaps, pools water, and fails in coastal winds.
How the Custom T-Top Cover Fits Your 260
The cover attaches directly to the underside edges of the factory T-top frame, then drapes down to enclose approximately 85–90 percent of the hull sides while fully covering the outboard engine. The T-top roof stays completely exposed above. A separate zippered section accommodates the T-top support legs so you can install or remove the cover without fighting the hardtop structure. Reinforced stitching at every stress point, stainless steel snaps, and adjustable tie-down straps along the gunwales keep everything locked down through coastal winds and seasonal storms. The 260’s wide 9-foot 3-inch beam puts more cover material under tension — our reinforced construction handles that load without sagging.
Built for Extended Offshore Storage Conditions
With a 150-gallon fuel tank providing serious offshore range, the 260 spends extended time in harsh saltwater environments — docked at coastal marinas, stored on heavy-duty lifts, or trailered between fishing destinations. Our 9 oz marine canvas is the most popular choice for Sea Hunt owners who want heavy-duty protection — the denser weave adds superior abrasion resistance and UV blocking while breathing to prevent trapped moisture and mildew. For boaters who want the absolute best, our Sunbrella option delivers unmatched UV and mold resistance with a 6-year fabric warranty. The same materials and construction protect other large Sea Hunt platforms like the Sea Hunt 255 Ultra T-Top. Available in navy, black, and charcoal gray — purpose-built for the Sea Hunt 260 and nothing else.
Reviews
There are no reviews yet.