Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 42 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
Our cover is custom-patterned for the Sea Hunt 30 Gamefish at 30 feet 2 inches long with a 9-foot 9-inch beam. It fits over the factory T-top frame and extends from bow to stern, fully covering both twin Yamaha F350 outboards (700HP combined) at the transom. The pattern is designed for the deep-V hull with 21-degree deadrise specific to the 30 Gamefish.
Very. The 30 Gamefish weighs approximately 7,000 lbs dry and is one of the largest center consoles Sea Hunt builds. Our cover uses premium Sunbrella marine-grade fabric with reinforced stitching at all stress points. Heavy-duty buckles and wide straps secure the cover at multiple points along the 9-foot 9-inch beam to handle the forces generated by wind on a cover this size.
Yes. The cover extends aft past the transom to fully enclose both Yamaha F350 outboard engines and their mounting hardware. This protects the engine cowlings, powerheads, and lower units from UV damage, salt spray, and corrosion that accelerate wear on exposed outboard components — especially important with twin engines representing a significant investment.
Yes. The cover is compatible with triple-axle trailers used for the 30 Gamefish. Reinforced strap points secure the cover during trailering. Given the size and weight of this boat, we recommend checking all strap connections before highway transport and ensuring the cover sits below the gunwale line to minimize wind resistance.
We use Sunbrella marine-grade acrylic fabric, which is the industry gold standard for offshore boat covers. It blocks over 98% of UV rays, resists salt water and salt air corrosion, prevents mold and mildew growth, and remains breathable so moisture does not get trapped against your gelcoat. With 230 gallons of fuel capacity, the 30 Gamefish is built for serious offshore use — the cover material matches that standard.
The cover is patterned for the factory T-top frame configuration including standard rod holder placements. Most factory-installed outrigger bases and rocket launcher mounts are accommodated. If you have aftermarket or oversized outrigger setups, contact us with photos so we can confirm fitment before ordering.
Select your model year and configuration on this product page and add to cart. We carry the cover in navy, black, and charcoal gray. If you have any custom modifications or are unsure about fitment, reach out to our team — we will confirm the right cover for your specific 30 Gamefish setup before shipping.
Sea Hunt 30 Gamefish T-Top Boat Cover – Heavy-Duty Protection for Your Offshore Machine
Your Sea Hunt 30 Gamefish is a serious offshore center console — it deserves a cover built to match. At 30 feet 2 inches long with a 9-foot 9-inch beam and approximately 7,000 pounds dry weight, the 30 Gamefish is one of the largest boats in the Sea Hunt lineup. Our custom-fitted T-top mooring cover is engineered to handle this size, providing full bow-to-stern coverage over the oversized T-top frame and twin Yamaha F350 outboard engines (700HP combined) at the transom.
The 30 Gamefish features a deep-V hull with 21-degree deadrise designed to cut through offshore chop on the way to the Gulf Stream. Our cover pattern is built around these exact hull dimensions, the large hardtop footprint, and the wide beam. Crafted from premium Sunbrella marine-grade fabric, the cover blocks harmful UV rays that fade gelcoat and crack vinyl, while remaining breathable enough to prevent moisture buildup and mildew underneath.
With a 230-gallon fuel capacity and twin outboards, this boat represents a significant investment. Our cover protects your Garmin or Simrad electronics suite, outrigger mounts, rocket launcher rod holders, massive fish boxes, and twin livewells from sun exposure, salt spray, bird droppings, and dock grime. Reinforced strap systems with heavy-duty buckles secure the cover at multiple points along the gunwale, keeping it tight during storage at the marina, on a triple-axle trailer, or under a boat barn. Available in navy, black, and charcoal gray.
Reviews
There are no reviews yet.