Robalo 230 R Specifications
- Length Overall (LOA): 23'
- Beam: 8'6"
- Dry Weight: ~4,000 lbs
- Engine: Single outboard, max 250 HP
- Fuel Capacity: 90 gallons
- Draft: ~19"
- Hull Type: Hydro Lift™ variable deadrise (20°), Kevlar-reinforced composite
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5-7 years); Sunbrella acrylic (8-10 years)
- Fit: Custom-fitted to 23' Robalo 230 R specifications
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 33 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The Robalo 230 R T-Top cover comes in 9oz solution-dyed marine fabric with 5–7 years of UV and weather protection, or premium Sunbrella acrylic with 8–10 years of durability. Both fabrics are water-repellent, mildew-resistant, and built for saltwater use.
Yes. Reinforced cutouts are pattern-cut to wrap around each T-Top support leg on the Robalo 230 R. The hardtop stays exposed while the cockpit below is fully covered and protected.
Installation takes one person under five minutes. Drape the cover over the cockpit, secure the adjustable straps and buckles, and cinch the hem cord along the rubrail for a snug, wind-resistant fit.
No — please remove the cover before towing your Robalo 230 (R). Our covers are not designed to be trailered: towing with the cover on can cause severe damage to the cover and voids the warranty. The cover is designed for storage only — on a trailer, boat lift, dry stack, or jet dock — and comes off in minutes at the ramp.
Yes. The cover provides a complete barrier over the entire cockpit, shielding all helm electronics, displays, leaning post, rod holders, fish boxes, and seating surfaces from UV, rain, salt, dust, and debris.
Your Robalo 230 (R) cover is backed by our manufacturer's warranty for the original purchaser. Materials and workmanship — stitching, straps, buckles, zippers, and other hardware — are covered for 1 year from the purchase date. Fabric is covered for 3 years on 7oz, 5 years on black or navy 9oz, and 6 years on Sunbrella. Covered defects are repaired or replaced after you contact us for a Return Merchandise Authorization (RMA) number. The warranty does not cover improper use, accident or negligence, unauthorized modifications, improper care, mold or mildew, incorrectly placed orders, theft or loss, or acts of God — and traveling with the cover on or using it in the water voids the warranty. See our Warranty page for full details.
The cover is water-resistant with a DWR finish that causes rain to bead off. It is designed to breathe, preventing trapped moisture from causing mildew or damage to interior surfaces.
Yes. The cover fits the Robalo 230 R across standard production model years with the factory T-Top installed. Hull dimensions and T-Top mount points have remained consistent.
The Robalo 230 (R) cover is available in 9oz solution-dyed polyester in Navy or Black, 7oz polyester in Black, or premium Sunbrella acrylic in Marine Blue, Black, or Smoke. Choose your fabric and color in the order options above.
Shipping is a $30 flat rate per cover within the continental United States. Because every cover is custom-made to order, please allow 1–3 weeks for your Robalo 230 (R) cover to be made and shipped — you'll receive tracking information as soon as it leaves our facility.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Robalo 230 R T-Top Boat Cover — Full-Size Fishing Power, Custom-Fitted
The Robalo 230 R is a 23-foot center console that delivers serious offshore range in a single-engine package. With an 8’6″ beam, 4,000 lbs dry weight, 90 gallons of fuel, and a 20-degree deadrise hull pushing up to 250 HP, the R230 runs comfortably to nearshore reefs and back with fuel to spare. Built at Robalo’s Nashville, Georgia facility with Kevlar-reinforced composite construction and the brand’s signature Hydro Lift™ hull, this platform planes in under five seconds and drafts just 19 inches with the engine trimmed up. Our T-Top boat covers shield the R230’s entire cockpit from UV, weather, and salt between fishing days.
Tailored to the 230 R’s Purpose-Built Fishing Cockpit
Pattern-cut to the R230’s specific dimensions and layout, this cover fits around the T-Top support legs, center console with flush-mount electronics, leaning post, integrated rod holders, insulated fish boxes, and livewells. The reinforced cutouts at each T-Top leg create a clean seal while leaving the hardtop exposed above. Solo installation takes under five minutes with the strap-and-buckle system and hem cord along the rubrail. Remove the cover before towing — it’s designed for storage, not highway travel. For the compact end of the R Series, check out the Robalo 180 R T-Top cover — the entry point in the lineup.
Protection That Matches Robalo’s Tournament-Grade Build
Every cover is available in 9oz solution-dyed marine fabric rated for 5–7 years of UV and weather protection, or premium Sunbrella acrylic for 8–10 years of durability. Both fabrics are water-repellent, mildew-resistant, and breathable enough to prevent trapped condensation from damaging electronics or the R230’s upholstery. Double-stitched seams and reinforced stress points ensure the cover performs season after season. Our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) comes standard. If you’re considering a Robalo with enhanced explorer features in a similar size, also see the Robalo 232 EX T-Top cover.