Robalo 302 Specifications
- Builder: Robalo Boats, Nashville, Georgia
- Type: Offshore center console, twin outboards
- Length: 29'2"
- Beam: 10'6"
- Deadrise: 21°
- Weight: About 8,920 lb with engines
- Fuel: 300 gal
- Draft: 21"
- Power: Twin outboards, up to 700 hp
- Cover Shipping Weight: 45 lbs
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
- Coverage: Fits up under the hardtop and covers the console, helm seating, bow seating, cockpit and transom, draping over the twin outboards
- Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
- Protection: UV-resistant, water-repellent, breathable
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 45 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's patterned for the Robalo R302 center console: the 29'2" twin-outboard boat with a 10'6" beam and a hardtop on D-frame uprights. The original R300 has its own page, so please confirm your model and year and which top you have when you order so we can check the pattern before we cut.
No. The R302 uses the R300's hull, but Robalo gave it a new interior, console and hardtop, so it has its own pattern. Choose this page only if your boat is an R302.
The cover runs aft over the transom and falls as one loose drape over both outboard cowlings; there are no separate fitted engine pockets, and the lower units stay exposed below the hem. Tilt the engines down so the fabric hangs evenly.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. The R302 was reviewed with a hardtop on D-frame uprights, and full-height side windows were optional. Tell us which top your Robalo R302 has when you order so we can check it against the pattern.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $2,300.00 · 9oz $2,500.00 · Sunbrella $2,935.00 — your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Robalo 302 T-Top Boat Cover — Custom-Fit for the Robalo R302 Center Console
Robalo Boats builds its saltwater fishing boats in Nashville, Georgia, alongside sister brand Chaparral. The R302 replaced the original R300 and runs on that boat’s HydroLift hull, with a new interior, console and hardtop. Salt Water Sportsman lists 29’2″ overall, a 10’6″ beam, 21 degrees of deadrise, a 21-inch draft, 300 gallons of fuel and 8,920 lb, rated to 700 hp; its test boat ran twin Yamaha F300s. The hardtop stands on powder-coated aluminum D-frame uprights behind a full-height windshield with a motorized vent. Up front, U-shaped seating converts to forward-facing loungers over three fish lockers, with a table stored in the bow locker. The console has a two-across helm seat and a step-down head with more than 6 feet of headroom, a sink and a shower. Aft are a 20-gallon livewell behind the helm, a 25-gallon livewell in the port quarter, a 5-foot flip-up transom bench and a transom door. This T-Top cover is patterned for the Robalo R302 with its hardtop, and like all of our Robalo boat covers, it’s cut to this hull rather than a generic 29-foot size chart.
How It Fits the Robalo R302
The cover runs up to the underside of the hardtop and wraps the D-frame uprights, so the roof stays exposed. Below it, the cover takes in the windshield, console and helm seat, then runs forward over the bow seating to the stem, falling to the rubrail along the 10’6″ beam. Aft, it covers the rigging station and transom bench and falls as one loose drape over the twin outboards, with the lower units exposed. Take out the bow table first. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
R302 or R300?
The original R300 shares this hull, but its console, seating and top are different, so we pattern the two separately. Robalo also reused the R300 name on a newer 30’6″ boat. If you aren’t sure which you own, check the model name on your registration or hull paperwork.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the boat the R302 replaced, see our Robalo 300 T-Top cover; for the largest R-series center console we cover, see the Robalo 360 R T-Top cover.