Scout 200 BAY Specifications
- Builder: Scout Boats, Summerville, South Carolina
- Type: Center-console bay boat
- Length Overall: About 19'10"
- Beam: 8'6"
- Draft: 10"
- Fuel: 58 gal
- Power: Single outboard (115–225 hp seen)
- Factory T-Top: Optional, with electronics box
- Cover Shipping Weight: 30 lbs
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
- Coverage: Runs up to the underside of the T-top, wraps the legs, and covers the console, leaning post, console seat, bow, rear deck and outboard cowling; T-top roof stays exposed
- Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
- Protection: UV-resistant, water-repellent, breathable
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 30 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's made for the Scout 200 Bay Scout — about 19'10" with an 8'6" beam — fitted with a T-top. Please confirm your model and year when you order so we can check the pattern before we cut.
Not reliably. The two are close in size, but the 201 has a different deck with casting platforms and the baitwell in the console, so it has its own pattern. Choose this page only if your boat is a 200.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. Scout offered a T-top with an electronics box on the 200, and many boats run a bimini instead. Tell us which top your 200 Bay Scout has when you order so we can check it against the pattern.
The cover runs over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. Tilt the engine down so the fabric hangs evenly.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $940.00 · 9oz $1,140.00 · Sunbrella $1,405.00 — your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Scout 200 BAY T-Top Boat Cover — Custom-Fit for the Scout 200 Bay Scout with T-Top
Scout Boats builds its fiberglass outboard boats in Summerville, South Carolina. The 200 Bay Scout is a 20-foot-class bay boat from Scout’s Bay Scout line that came before the 201 Bay Scout. Listings give it a 19’10” overall length, and Scout’s spec sheet lists an 8’6″ beam, a 10-inch draft and a 58-gallon fuel tank, with Yamaha power; boats we saw carried single outboards of 115 to 225 hp. Standard equipment includes an anchor locker and bow storage, a six-rod gunwale rack, a removable 94-quart console seat and cooler, an aluminum leaning post with rod holders, a lighted, aerated baitwell to port, rear deck storage and four flush-mount rod holders. A T-top with an electronics box was a factory option, as were a bimini, a bow cushion, a swim platform and a trolling motor plug. This T-Top cover is patterned for the Scout 200 Bay Scout with its T-top, and like all of our Scout boat covers, it’s cut to this hull rather than a generic 20-foot size chart.
How It Fits the Scout 200 Bay Scout
The cover runs up to the underside of the T-top and wraps its legs, leaving the roof exposed. Below it, the cover takes in the console, the leaning post and the console seat, then runs forward over the bow storage hatches to the stem, falling to the rubrail along the 8’6″ beam. Aft, it covers the rear deck and baitwell hatch and falls as one loose drape over the outboard cowling, with the lower unit exposed. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Not the Same as the 201 Bay Scout
The newer 201 Bay Scout is about the same size, with the same 8’6″ beam and 58-gallon tank listed, but its deck was reworked, with the aerated baitwell moved into the console and fore and aft casting platforms. Because the decks differ, check the model name on your registration or hull paperwork.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the newer model, see our Scout 201 BAY T-Top cover; for a larger Scout bay boat, see the Scout 220 BAY T-Top cover.