Boston Whaler 210 Dauntless Specifications
- Model Years: 2014–2020
- Length Overall: 20'6" (21'3" with platforms)
- Beam: 8'6"
- Dry Weight: About 2,600 lb (no engine)
- Fuel Capacity: 75 gal
- Deadrise: 16° at transom
- Power: Single outboard, 150–200 hp
- Draft: 14"
- Capacity: 8 people
- Cover Shipping Weight: 31 lbs
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage: Full boat: peaks over the console and slopes to the gunwales, covering the pilot seat, bow casting deck, stern bench, and outboard
- Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
- Protection: UV-resistant, water-repellent, breathable
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 31 lbs |
|---|---|
| Fabric | 9oz Polyester |
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The 210 Dauntless center console without a T-top, sold from the 2014 model year until it left Whaler's lineup after 2020.
No. The 200 Dauntless it replaced is the same length but a bit narrower (8'5") with a different layout, so it has its own pattern.
Get this one if your boat has no top or a folding suntop. If Whaler's optional T-top is mounted, choose the T-Top version, which runs up to the underside of the top and wraps its legs.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz $895.00 · Sunbrella $1,045.00 — your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Boston Whaler 210 Dauntless Center Console Boat Cover — Custom-Fit for the Whaler 210 Dauntless Without a T-Top
The Boston Whaler 210 Dauntless is the 21-foot Dauntless center console that BoatTEST called ‘brand new for 2014,’ replacing the 200 Dauntless; it remained in the lineup through the 2020 model year. Whaler’s spec sheet gives it 20’6″ on centerline (21’3″ with platforms), an 8’6″ beam, a 14-inch draft, 16° of deadrise and about 2,600 lb dry without engine, with 75 gallons of fuel and a single outboard of 150–200 hp. The layout has a wide forward casting deck with optional bow cushions/sun lounge or table, a forward livewell and fishbox, a center console with a portable head behind a starboard door, a padded forward console seat, a reversible double-wide pilot seat over a slide-out cooler or optional livewell, and a full-width aft casting platform that converts to a padded stern bench, plus a swim platform with ladder. This Center Console cover is patterned for the 210 Dauntless without a T-top, and like all of our Boston Whaler boat covers, it’s cut to this hull rather than a generic 21-foot size chart.
How It Fits the 210 Dauntless
The cover peaks over the console and windshield, slopes over the pilot seat and the wide forward casting deck to the gunwales, and continues aft over the stern bench and the single outboard as one drape. Whaler offered a suntop, an All Activity Tower, a poling platform and a tow arch on this boat — fold a suntop down before covering, and if you have a tower, arch or T-top, contact us first. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. If your boat has a T-top, see the Boston Whaler 210 Dauntless T-Top cover, or compare the Boston Whaler 220 Dauntless cover.