Key West 203 DFS Specifications
- LOA: ~20' 3" | Beam: ~8' 0" | Dry Weight: ~1,950 lbs
- Draft: ~12" | Deadrise: ~19°
- Hull: Fiberglass modified-vee, no-wood/no-rot construction, foam-injected stringer system
- Engine Configuration: Single outboard, 150 HP recommended, 200 HP maximum
- Fuel Capacity: ~50 gallons
- Cover Style: Center console boat cover
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: Full boat cover with custom-fitted cutouts
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5–7 years); Sunbrella acrylic (8–10 years)
- Fit: Custom-fitted to Key West 203 DFS specifications
- Protection: UV-resistant, water-repellent, mildew-resistant, breathable
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 30 lbs |
|---|---|
| Fabric | 9oz Polyester |
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
Yes — this cover is pattern-cut specifically for the Key West 203 DFS hull. It fits the approximately 20-foot-3-inch length with 8-foot beam, wrapping over both consoles and fully enclosing the outboard engine as one continuous piece.
DFS stands for Dual Function Sportsman. It's Key West's dual console layout — a passenger console on the port side and a helm console on starboard. The cover wraps both consoles completely, so the dual layout doesn't affect fit.
Two options: our heavy-duty 9oz solution-dyed polyester (the most popular choice for its durability and value) or premium Sunbrella acrylic canvas (the best option for maximum UV resistance and breathability). Both are solution-dyed through the entire fiber for permanent colorfastness.
Yes. The cover extends past the transom and fully encloses the outboard engine in a natural, slightly loose drape. There's no separate engine cover — it's all one continuous piece from bow past the motor.
Yes. The cover is designed for both mooring and trailering. The adjustable tie-down straps and elastic hem cord keep the cover locked tight at highway speeds. Many owners use it as their primary trailering cover.
About 15 minutes with one person. The 203 DFS's manageable 20-foot length and 8-foot beam make solo installation straightforward. Drape from bow to stern, cinch the hem cord along the rubrail, and secure the tie-down straps.
The cover accommodates engines from 150 HP up to the maximum 200 HP rated for the 203 DFS. When you order, you'll select your specific motor configuration so the cover is cut to match your exact setup.
The cover is pattern-cut to the 203 DFS's hull shape with a natural slope from bow to stern. Water runs off rather than pooling. For best results, use a support pole (available separately) to maintain a peak in the center that channels water to the sides.
Yes — the 203 DFS has been in continuous production since 2014 and remains part of Key West's current dual console lineup. Our cover fits all model years from 2014 to present.
This is a full mooring cover that wraps the entire boat from bow to stern — hull, consoles, and engine. A T-Top cover only protects the hardtop structure. If your 203 DFS doesn't have a T-Top, this mooring cover is the right choice for complete protection.
Key West 203 DFS Boat Cover — Dual Console Protection Done Right
The Key West 203 DFS packs serious fishing capability into a 20-foot dual console package, and this custom-fitted mooring cover is built to match every curve. At roughly 20 feet 3 inches long with an 8-foot beam and around 1,950 pounds dry, the 203 DFS sits in the sweet spot between nimble inshore fishing and comfortable family cruising. Our cover wraps the entire hull — both consoles, the swim platform, and the outboard engine — as one continuous piece of marine-grade fabric.
The cover rises over the dual console layout, slopes smoothly toward the stern, and extends past the transom to fully enclose the single outboard engine in a natural, slightly loose drape. A hem cord cinches along the rubrail while the bottom edge reaches nearly to the keel, leaving only a thin strip of hull exposed. Pattern-cut to the 203 DFS’s 19-degree deep-V hull dimensions, the cover sheds rain cleanly and stays tight through wind and trailering.
Built for the 203 DFS’s Deep-V Hull
The 203 DFS runs a proven 19-degree deadrise that handles chop confidently, and our cover contours to that hull shape precisely. Choose our heavy-duty 9oz solution-dyed polyester — the most popular option for its rugged durability and colorfastness — or upgrade to premium Sunbrella acrylic canvas for the best UV resistance and breathability available. Both fabrics are solution-dyed through the entire fiber, so color stays locked in permanently through years of sun, salt, and weather exposure.
Quick One-Person Installation
Installation takes about 15 minutes with one person. The 203 DFS’s manageable 8-foot beam and 20-foot length keep coverage easy to handle solo. Drape from bow to stern, then secure with the included elastic hem cord and adjustable tie-down straps. The cover stays locked in place on trailers and in dry storage — ready whenever you are.
Explore Key West DFS Covers
Browse all center console boat covers to find protection for any center console hull. Need a cover for the larger DFS? Check out our Key West 239 DFS center console cover for the 23-foot stepped-hull variant. Own the single-console version? See our Key West 203 FS center console cover for the same hull in the FS configuration.
Reviews
There are no reviews yet.