Key West 239 DFS Specifications
- LOA: ~23' 9" | Beam: ~8' 6" | Dry Weight: ~2,800 lbs
- Draft: ~14" | Deadrise: ~19°/24° stepped
- Hull: Fiberglass modified-vee with stepped hull, no-wood/no-rot construction, closed cell foam flotation
- Engine Configuration: Single outboard, 200–250 HP recommended, 300 HP maximum
- Fuel Capacity: ~100 gallons
- Cover Style: Center console boat cover
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: Full boat cover with custom-fitted cutouts
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5–7 years); Sunbrella acrylic (8–10 years)
- Fit: Custom-fitted to Key West 239 DFS specifications
- Protection: UV-resistant, water-repellent, mildew-resistant, breathable
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 33 lbs |
|---|---|
| Fabric | 9oz Polyester |
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
Yes — this cover is pattern-cut specifically for the Key West 239 DFS hull. It fits the approximately 23-foot-9-inch length with 8-foot-6-inch beam, wrapping over both consoles and fully enclosing the outboard engine as one continuous piece.
Absolutely. The cover is pattern-cut to match the 239 DFS's stepped hull profile with its 19-degree entry and 24-degree transom deadrise. The stepped design doesn't affect cover fit — the fabric drapes over the hull contours naturally.
Two options: our heavy-duty 9oz solution-dyed polyester (the most popular choice for its durability and value) or premium Sunbrella acrylic canvas (the best option for maximum UV resistance and breathability). Both are solution-dyed through the entire fiber for permanent colorfastness.
Yes. The cover extends past the transom and fully encloses the outboard engine in a natural, slightly loose drape. There's no separate engine cover — it's all one continuous piece from bow past the motor.
Yes. The cover is designed for both mooring and trailering. The adjustable tie-down straps and elastic hem cord keep the cover locked tight at highway speeds. At 2,800 pounds dry, the 239 DFS is a substantial boat — the cover's reinforced stitching handles the wind loads of trailering without issue.
The cover accommodates engines from 200 HP up to the maximum 300 HP rated for the 239 DFS. When you order, you'll select your specific motor configuration so the cover is cut to match your exact setup.
About 15 minutes with one person. Despite the 239 DFS's generous 23-foot length and 8-foot-6-inch beam, the cover's pattern-cut design and lightweight fabric keep solo installation manageable. Drape from bow to stern, cinch the hem cord, and secure the straps.
No — this is a mooring cover designed for boats without a T-Top or hardtop. If your 239 DFS has a hardtop, you'll need the T-Top version of the cover. This mooring cover wraps the hull, consoles, and engine for boats with an open helm.
The 239 DFS has a dual console layout while the 239 FS is a single center console. Each cover is pattern-cut to its specific model's dimensions and console configuration. Make sure to select the correct model when ordering.
Yes — the 239 DFS has been in production since 2019 and remains part of Key West's current dual console lineup. Our cover fits all model years from 2019 to present.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Key West 239 DFS Boat Cover — Custom Protection for the Stepped-Hull Dual Console
The Key West 239 DFS is one of Key West’s most capable dual consoles — 23 feet 9 inches of stepped-hull performance with room for nine and power up to 300 horses. Our custom-fitted mooring cover wraps every inch of the 239 DFS’s 8-foot-6-inch beam hull, both consoles, the swim platform, and the outboard engine as one continuous piece of marine-grade fabric. At roughly 2,800 pounds dry with a 100-gallon fuel capacity, this is a serious boat that deserves serious protection.
The cover rises over the dual console layout, slopes smoothly toward the stern, and extends past the transom to fully enclose the outboard engine in a natural, slightly loose drape. A hem cord cinches along the rubrail while the bottom edge reaches nearly to the keel, leaving only a thin strip of hull exposed. Pattern-cut to the 239 DFS’s stepped hull with its 19-degree entry and 24-degree transom deadrise, the cover sheds rain cleanly and stays tight through wind and trailering.
Engineered for the 239 DFS’s Stepped Hull
The 239 DFS runs a stepped hull with 19-degree entry deadrise transitioning to 24 degrees at the transom — a design that delivers both speed and stability. Our cover contours to that unique hull profile precisely. Choose our heavy-duty 9oz solution-dyed polyester — the most popular option for its rugged durability and colorfastness — or upgrade to premium Sunbrella acrylic canvas for the best UV resistance and breathability available. Both fabrics are solution-dyed through the entire fiber, so color stays locked in permanently through years of sun, salt, and weather exposure.
Quick One-Person Installation
Installation takes about 15 minutes with one person. Despite the 239 DFS’s generous 23-foot length and 8-foot-6-inch beam, the cover’s pattern-cut design and lightweight fabric keep coverage manageable solo. Drape from bow to stern, then secure with the included elastic hem cord and adjustable tie-down straps. The cover stays locked in place on trailers and in dry storage — ready whenever you are.
Explore Key West DFS Covers
Browse all center console boat covers to find protection for any center console hull. Looking for the smaller DFS? Check out our Key West 203 DFS center console cover for the 20-foot variant. Own the single-console version? See our Key West 239 FS center console cover for the same hull in the FS configuration.
Reviews
There are no reviews yet.