Nautic Star 210 Angler Center Console Boat Cover & Canvas

NauticStar 210 Angler Specifications

  • Builder: NauticStar (Amory, Mississippi; founded 2002)
  • Model: 210 Angler (factory data 2015)
  • Length: 20' 4"
  • Beam: 8' 2" (98")
  • Weight: about 2,100 lb
  • Power: Single outboard, 150 hp max
  • Draft: about 8"
  • Layout: 3-across rear seat, cooler seat, console seat, fore and aft casting decks
  • Cover Shipping Weight: 31 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
  • Coverage: Full custom cover over the console, cooler seat, casting decks, rear seating, cockpit and outboard, sloped to the rubrail
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 31 lbs
Fabric

9oz Polyester

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

Center Console is our cover maker's name for the full-coverage style, made for any boat without a T-top or hardtop. It covers the whole boat in one piece from bow to stern and rubrail to rubrail, console, windshield and engine included. If your boat has a T-top, you want our T-Top style instead, which fits up under the top and leaves the roof exposed.
It's patterned for the 210 Angler (20'4" x 8'2") without a T-top. It isn't cut for the 211 Angler, which is longer and wider at 20'9" x 8'6"; see our 211 Angler full cover for that boat.
Yes. The cover peaks over the console whether you have the standard console or the larger head console. Fold the bimini down into its boot first.
Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn't made to go over one, and the order form will ask you to confirm you'll remove it. If your boat has Power-Poles or other shallow-water anchors, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.
Check the model on your registration or the hull plate and measure the overall length and beam: NauticStar lists the 210 Angler at 20'4" long with a 98" beam. NauticStar has built several similar sizes under different names over the years, so send us your model year, length, beam and whether the boat has a T-top before you order, and we'll confirm the 210 Angler pattern fits.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz $895.00  ·  Sunbrella $1,045.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty.

    Our covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you are agreeing to modify your cover further if the fit at the motors isn't as desired.

    Motor Option

    Bow Option

    test

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    Additional Option

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

NauticStar 210 Angler Center Console Boat Cover — Custom-Fit for the NauticStar 210 Angler Without a T-Top

NauticStar builds its boats in Amory, Mississippi, where Phillip Faulkner founded the company in 2002; it became part of MasterCraft in October 2017 and joined Iconic Marine Group in 2022. The 210 Angler is a 20-foot NauticStar fishing boat that doubles as a family runabout; factory data for it is published for the 2015 model year. NauticStar lists it at 20’4″ long with a 98″ (8’2″) beam, about 2,100 lb and a 150 hp maximum, with an approximate 8-inch draft. The layout has flip-up three-across rear seating over storage, casting decks fore and aft, a console with a heavy-duty windscreen, a fold-down grab rail and a seat built into its front, a 72-quart flip-flop cooler seat at the helm, a 20-gallon in-console baitwell, a 27-gallon rear release well, 12 rod holders and in-floor cast net storage. A color-matched Sunbrella bimini was the factory top, and a larger console with a head compartment was optional. This full cover is patterned for the 210 Angler, and like all of our NauticStar boat covers, it’s cut to this hull rather than a generic 20-foot size chart.

How It Fits the 210 Angler

With no top in the way, the cover goes over the whole boat as one piece. It peaks over the console and windscreen, runs forward over the bow casting deck to the rubrail along the 8’2″ beam, and falls aft over the cooler seat and the three-across rear seat. At the transom it closes around the single outboard, so rain sheds off the peak instead of soaking the cushions. If your boat carries a bimini, fold it down into its boot before covering. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Trolling Motors and Power-Poles

Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one, and the order form will ask you to confirm you’ll remove it. If your boat has Power-Poles or other shallow-water anchors, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the 21-foot models that followed, see our NauticStar 211 Angler full cover and our NauticStar 211 Hybrid full cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })