Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
Coverage: Full cover that peaks over the console and slopes to the gunwales, covering the bow, forward seat, leaning post, jump seats and outboard cowling
Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
26 lbs
Fabric
9oz Polyester
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's made for the Parker 1801 Center Console — 7'6" beam, listed at 20' overall — with no T-top. Bow rails, biminis and forward platforms vary from boat to boat, so please confirm your model year and setup when you order so we can check the pattern before we cut.
Both are made for the same 1801 hull. This Center Console cover is for a boat with no top: it covers the whole boat and peaks over the console. If your 1801 has a T-top, order the 1801 T-Top cover, which fits up under the top and wraps its legs.
A bimini needs to be folded down flat before the cover goes on. If your 1801 has a bimini or other frame that stays up, contact us with your model year and setup before ordering.
The cover runs over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz$835.00 · Sunbrella$985.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Parker 1801 Center Console Boat Cover — Custom-Fit for the Parker 1801
Parker Boats builds its fiberglass fishing boats in Beaufort, North Carolina, an area known for more than two centuries of hand-built boats. The 1801 Center Console is Parker’s 18-foot center console: an 18’1″ hull listed at 20′ overall, with a 7’6″ beam, about 7 inches of draft, 14 degrees of deadrise at the transom and a dry weight of about 2,050 lb. It carries 40 gallons of fuel, and single Yamaha outboards from 115 hp up to an F150 package have been offered. Standard gear includes a console with windshield and grab rail, a forward-facing seat with a 20-gallon livewell beneath it, a leaning post with backrest and rocket launcher, stern jump seats with hinged lids, cushions and backrests, a foredeck anchor locker, under-gunwale rod storage and a three-step boarding platform with ladder over a self-bailing cockpit. Bow rails, a canvas bimini on a stainless frame and a forward casting platform were offered as options. This Center Console cover is patterned for the Parker 1801 without a T-top, and like all of our Parker boat covers, it’s cut to this hull rather than a generic 18-foot size chart.
How It Fits the Parker 1801
The cover peaks over the console and windshield and slopes down to the gunwales, so rain runs off instead of pooling. Forward it covers the foredeck and anchor locker and runs to the bow; through the middle it covers the forward seat and leaning post, falling to the rubrail along the 7’6″ beam. Aft, it covers the stern jump seats and transom and wraps the outboard as one loose drape over the cowling, with the lower unit exposed. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. If your 1801 has a T-top, choose the Parker 1801 T-Top cover; for the newer, wider 18-footer, see the Parker 180 Coastal T-Top cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.