Pathfinder 2200 TRS Center Console Boat Cover & Canvas

Pathfinder 2200 TRS Specifications

  • Builder: Pathfinder Boats / Maverick Boat Group (Fort Pierce, FL)
  • Length: 22'2" (earlier) / 22'5" (later)
  • Beam: 8'6"
  • Draft: About 11"–13"
  • Deadrise: 15°
  • Weight: About 2,650–3,275 lb with F150 (by generation)
  • Fuel: 55 gal (earlier) / 65 gal (later)
  • Power: Single outboard, up to 250 hp
  • Cover Shipping Weight: 32 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
  • Coverage: Full cover that peaks over the console and slopes to the gunwales, covering the bow casting deck, leaning post, stern casting platform and outboard cowling
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 32 lbs
Fabric

9oz Polyester

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's made for the Pathfinder 2200 TRS with no T-top or hardtop. Pathfinder has built an earlier 22'2" version and a later 22'5" redesign, so please confirm your model and year when you order so we can check the pattern before we cut.
Both are cut for the 2200 TRS hull. This Center Console cover is for a boat with no top and covers the whole boat, peaking over the console. If your boat has a T-top or hardtop, order the 2200 TRS T-Top cover, which fits up under the top and wraps its supports.
Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn't made to go over one.
If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz $1,015.00  ·  Sunbrella $1,195.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty.

    Our covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you are agreeing to modify your cover further if the fit at the motors isn't as desired.

    Motor Option

    Bow Option

    test

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    Additional Option

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Pathfinder 2200 TRS Center Console Boat Cover — Custom-Fit for the Pathfinder 2200 TRS

Pathfinder bay boats are built by Maverick Boat Group in Fort Pierce, Florida. Pathfinder has built two generations of the 2200 TRS, and TRS stands for third row seating. The earlier boat is listed at 22’2″ with an 8’6″ beam, about 11 inches of draft, 15 degrees of deadrise, 55 gallons of fuel and about 2,650 lb with an F150; the later redesign is 22’5″ long on the same 8’6″ beam, with 65 gallons of fuel and about 3,275 lb with an F150. Both are rated for a single outboard up to 250 hp. On the later boat a two-person seat folds out of the center of the aft casting platform, the console opens forward through Dutch doors behind a removable cooler seat, the leaning post has rod holders and a slide-out Engel cooler, a 35-gallon livewell sits aft to port, and the flat transom is made to take a pair of Power-Poles beside the swim platform and ladder. A T-top or fiberglass hardtop is optional. This Center Console cover is patterned for the Pathfinder 2200 TRS without a T-top, and like all of our Pathfinder boat covers, it’s cut to this hull rather than a generic 22-foot size chart.

How It Fits the Pathfinder 2200 TRS

The cover peaks over the console and windshield and slopes down to the gunwales, so rain runs off instead of pooling. Forward it covers the bow casting deck, its hatches and the forward cushions and runs to the stem; through the middle it takes in the leaning post, falling to the rubrail along the 8’6″ beam. Aft, it covers the stern casting platform with the third-row seat folded down and wraps the outboard as one loose drape over the cowling, with the lower unit exposed. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. If your 2200 TRS has a T-top or hardtop, choose the Pathfinder 2200 TRS T-Top cover; for the V-bottom 22 with the TRS name, see the Pathfinder 2200 V TRS Center Console cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })