Robalo 200 Specifications
- Builder: Robalo, Nashville, Georgia
- Type: Center console
- Length: 20'7"
- Beam: 8'4"
- Deadrise: 18° at transom
- Dry Weight: About 3,000 lb with engine
- Fuel: 70 gal
- Draft: 30" engine down
- Power: Single outboard, up to 200 hp
- Cover Shipping Weight: 30 lbs
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage: Full cover from bow to stern and rubrail to rubrail, peaking over the console and windshield and covering the bow seating, leaning post, jump seats and outboard cowling
- Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
- Protection: UV-resistant, water-repellent, breathable
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 30 lbs |
|---|---|
| Fabric | 9oz Polyester |
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's made for the Robalo 200 (sold as the R200) — 20'7" with an 8'4" beam — with no T-top. Please confirm your model and year when you order so we can check the pattern before we cut.
No. The 207 is the same length and beam, but its dual-console deck and walk-through windshield need their own pattern, so it uses our 207 DC Center Console cover.
This cover is for a Robalo 200 with no hard top; it goes over the whole boat, console and windshield included. Contact us before ordering if your boat has a bimini top or T-top or any other raised frame so we can check whether it will fit.
The cover runs over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. Tilt the engine down so the fabric hangs evenly.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz $895.00 · Sunbrella $1,045.00 — your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Robalo 200 Center Console Boat Cover — Custom-Fit for the Robalo R200
Robalo builds its fishing boats in Nashville, Georgia, alongside sister brand Chaparral. The Robalo 200, sold as the R200, is a 20-foot center console with bow seating. It measures 20’7″ with an 8’4″ beam and an 18-degree transom deadrise, weighs about 3,000 lb with the engine, carries 70 gallons of fuel and is rated for a single outboard up to 200 hp. The bow has seating with removable cushions over insulated storage boxes that drain overboard. The console has an acrylic windshield with a stainless grab rail, six vertical rod holders, a forward console seat with a bolster and a hinged door to a compartment with 5 feet of headroom and room for an optional portable toilet. Behind the helm is a leaning post with a 72-quart cooler, and at the stern a 15-gallon livewell sits between fold-down jump seats that convert to a casting platform. Robalo offered a bimini top or a T-top as options. This Center Console cover is patterned for the Robalo 200 without a T-top, and like all of our Robalo boat covers, it’s cut to this hull rather than a generic 20-foot size chart.
How It Fits the Robalo 200
The cover peaks over the console and windshield and slopes down to the gunwales, so rain runs off instead of pooling. Forward it runs over the bow seating to the stem; through the middle it takes in the console seat and leaning post, falling to the rubrail along the 8’4″ beam. Aft, it covers the jump seats and livewell and falls as one loose drape over the outboard cowling, with the lower unit exposed. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Not the Same as the 207 Dual Console
Robalo’s 207 shares the R200’s 20’7″ length and 8’4″ beam, but it’s a dual console with a walk-through windshield, so its deck isn’t cut like the 200’s. If you aren’t sure which you own, check the model name on your registration or hull paperwork.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the dual console of the same size, see our Robalo 207 DC Center Console cover; for the 18-footer, see the Robalo 180 Center Console cover.