Power: Single outboard, up to 300 hp (current factory figure)
Cover Shipping Weight: 33 lbs
Cover Features
Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
Coverage: Full cover from bow to stern and rubrail to rubrail, peaking over the console and windshield and covering the casting decks, leaning post, cockpit and outboard cowling
Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
33 lbs
Fabric
9oz Polyester
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's made for the Sea Chaser 23 LX bay boat with no T-top: the 22'9" hull with a 103-inch beam. It isn't the 21 LX or the older 225 Bay Runner, so please confirm your model and year when you order so we can check the pattern before we cut.
This cover goes over the whole boat, console included, so it's for a 23 LX with no top. If yours has any of the T-top options, choose our 23 LX T-Top cover. Sea Chaser also offers a bimini; contact us before ordering if your boat has one so we can check the fit.
The cover runs over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. Tilt the engine down so the fabric hangs evenly.
If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz$1,015.00 · Sunbrella$1,195.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Sea Chaser 23 LX Center Console Boat Cover — Custom-Fit for the Sea Chaser 23 LX Bay Boat
Sea Chaser boats are built by Carolina Skiff, LLC of Waycross, Georgia. The 23 LX sits in the middle of Sea Chaser’s LX Bay Series. Sea Chaser lists a 22’9″ length, a 103-inch (8’7″) beam, a boat weight of 2,874 lb, a 52-gallon fuel tank and a single outboard of up to 300 hp on a stepped hull; Florida Sportsman’s review gave 2,450 lb, a 250-hp maximum and 22-inch gunwales. Elevated forward and aft casting decks frame a sunken cockpit. Up front are an anchor locker, an insulated fish box, two forward-opening locking rod lockers, a low-profile bow rail and a trolling motor panel. The console has a quick-disconnect windshield and a bi-fold door, with a front passenger seat over a baitwell and an Ultra leaning post with a 70-quart cooler. Aft are a rear baitwell, two flip-up jump seats, a stern rail and a swim platform with a ladder. This Center Console cover is patterned for the Sea Chaser 23 LX without a T-top, and like all of our Sea Chaser boat covers, it’s cut to this hull rather than a generic 23-foot size chart.
How It Fits the Sea Chaser 23 LX
The cover goes over the whole boat, bow to stern and rubrail to rubrail. It peaks over the console and windshield and slopes down to the gunwales, so rain runs off instead of pooling. Forward it runs across the two-tier bow deck, rod lockers and bow rail to the stem; through the middle it takes in the leaning post, falling to the rubrail along the 8’7″ beam. Aft, it covers the rear deck, jump seats and stern rail and falls as one loose drape over the outboard cowling, with the lower unit exposed. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
23 LX or 21 LX?
The 21 LX shares the LX layout but is about two feet shorter at 20’7″, so it has its own cover. If you aren’t sure which you own, check the model name on your registration or hull paperwork.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. If your 23 LX has a T-top, see our Sea Chaser 23 LX T-Top cover; for the smaller LX, see the Sea Chaser 21 LX Center Console cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.