7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
27 lbs
Fabric
9oz Polyester
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's patterned for the Sea Fox 199 Commander (also listed as the 199 CC), the 19'9" center console with an 8'1" beam and a single outboard, set up without a T-top. Please confirm your model and year when you order so we can check the pattern before we cut.
The cover runs over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. Tilt the engine down so the fabric hangs evenly.
Fold the Bimini down and stow it in its boot before you install the cover. The cover is cut to peak over the console and windscreen, not over a raised Bimini frame.
If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz$835.00 · Sunbrella$985.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Sea Fox 199 Commander Center Console Boat Cover — Custom-Fit for the Sea Fox 199 Commander Without a T-Top
Sea Fox Boat Company of Moncks Corner, South Carolina, built the 199 Commander as the smallest boat in its Commander series of center consoles; some dealers list it as the 199 CC. Sea Fox’s spec sheet gives a 19’9″ centerline length, an 8’1″ beam, a 19-degree deadrise, a 2,350 lb dry weight, 51 gallons of fuel and a 175 hp maximum on a single outboard, and boats we found carry Yamaha 115 and 150 four-strokes. Up front are an anchor locker, bow storage/fish box and stainless bow grab rails, with a seat and backrest on the front of the console. The console has a windscreen with hand rail and room inside for a portable toilet; two pedestal seats were standard at the helm, with a leaning post and 72-quart cooler optional. Aft are an 11-gallon aerated livewell, a transom storage box, two removable stern jump seats and a swim platform with ladder. Options included a Bimini top and a T-top with either a canvas or a fiberglass top. This Center Console cover is patterned for the 199 Commander without a T-top, and like all of our Sea Fox boat covers, it’s cut to this hull rather than a generic 20-foot size chart.
How It Fits the 199 Commander
The cover peaks over the console and windscreen and slopes down to the gunwales, running forward over the console seat and bow storage to the stem and falling to the rubrail along the 8’1″ beam. It covers the helm seats or leaning post and the livewell, then wraps the transom and falls as one loose drape over the outboard, with the lower unit exposed. Lift out the stern jump seats and tilt the engine down first so the fabric lies flat. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
199 Commander or 199 CC?
Sea Fox’s own sheet calls the boat the 199 Commander, and some dealers list it as the 199 CC; both names refer to this 19’9″ center console. If your 199 has a T-top, choose our T-Top style cover instead, since this one is cut for a boat with no top.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For a 199 with a T-top, see our Sea Fox 199 T-Top cover; for the next Commander up, see the Sea Fox 206 Commander T-Top cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.