Sea Fox 226 Traveler Center Console Boat Cover & Canvas

Sea Fox 226 Traveler Specifications

  • Builder: Sea Fox Boat Company, Moncks Corner, South Carolina
  • Type: Dual console (Traveler series), single outboard
  • Length: 22'4" (centerline)
  • Beam: 8'6"
  • Deadrise: 19°
  • Dry Weight: About 2,700 lb without engine
  • Fuel: 105 gal
  • Draft: 14" (hull)
  • Max Power: 250 hp
  • Capacity: 8 people
  • Cover Shipping Weight: 35 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
  • Coverage: Full cover from bow to stern and rubrail to rubrail, over both consoles, the windshield, bow lounge, cockpit and outboard
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 35 lbs
Fabric

9oz Polyester

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's patterned for the Sea Fox 226 Traveler dual console with no hard top: the 22'4" hull with an 8'6" beam. The 228 Traveler that followed it is a different boat, so please confirm your model and year when you order so we can check the pattern before we cut.
Center Console and T-Top are the names of our two cover styles, not boat types. The Center Console style is the full cover for a boat with no hard top: it covers the whole boat bow to stern and rubrail to rubrail, windshield and engine included. That's the style that fits a 226 Traveler with no hard top. If your boat has a hard top, choose the T-Top style instead.
No. Fold the bimini down flat before you put the cover on; the cover then runs over the windshield and consoles. If your 226 Traveler has the Ultima hard top instead, the T-Top cover is the one to order.
The cover runs over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. Tilt the engine down so the fabric hangs evenly.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz $1,085.00  ·  Sunbrella $1,275.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty.

    Our covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you are agreeing to modify your cover further if the fit at the motors isn't as desired.

    Motor Option

    Bow Option

    test

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    Additional Option

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Sea Fox 226 Traveler Center Console Boat Cover — Custom-Fit for the Sea Fox 226 Traveler Dual Console

Sea Fox Boat Company builds its saltwater boats in Moncks Corner, South Carolina. The 226 Traveler is Sea Fox’s 22-foot dual console, a family and watersports boat with fishing gear built in, and it has since been followed in the lineup by the 228 Traveler. The factory sheet lists a 22’4″ centerline length, an 8’6″ beam, a 19-degree deadrise, a dry weight of about 2,700 lb and 105 gallons of fuel, with a single outboard of up to 250 hp and room for eight people. Forward of the curved walk-through windshield is bow lounge seating with curved backrests and flip-up armrests; the helm has an adjustable bucket seat, and the passenger console holds a head with a sink. Aft there’s a bench seat across the transom, a 19-gallon aerated livewell, storage boxes under the helm and passenger seats, and a walk-through transom with a swing gate. A canvas bimini top is standard and Sea Fox’s Ultima hard top is optional. This Center Console cover is patterned for the Sea Fox 226 Traveler with its bimini or no top, and like all of our Sea Fox boat covers, it’s cut to this hull rather than a generic 22-foot size chart.

How It Fits the 226 Traveler

This is a full cover: it runs from the bow to the stern and from rubrail to rubrail along the 8’6″ beam. It peaks over the two consoles and the windshield, slopes down over the bow lounge and cockpit to the gunwales, and finishes with a hem cord at the rubrail. Fold the bimini down flat and take out the bow table and filler cushion first. Aft, it covers the transom bench and falls as one loose drape over the outboard, with the lower unit exposed. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Bimini or Ultima Hard Top?

This cover is for a 226 Traveler with the standard bimini or no top at all. If your Traveler has the optional Ultima hard top, choose the T-Top cover, which fits up under the hard top and leaves the roof exposed.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. If your Traveler has the Ultima hard top, see our Sea Fox 226 Traveler T-Top cover; for the newer dual console, see the Sea Fox 228 Traveler T-Top cover.

Sign up for updates and information about our business