Sea Hunt 211 LE Specifications
- Hull Type: Deep-V performance hull
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: Center console cover wraps entire hull including engine; single tent-like shape
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5-7 years); Sunbrella acrylic (8-10 years)
- Fit: Custom-patterned for the Sea Hunt 211 LE
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 33 lbs |
|---|---|
| Fabric | 9oz Polyester |
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The 211 LE (Limited Edition) was Sea Hunt's upgraded version of the standard 211 CC. The LE featured a wider beam than the standard 211, heavier construction reflecting reinforced build quality, and enhanced hardware including upgraded cleats, grab rails, and helm station components. Our cover patterns account for these dimensional differences — the 211 LE cover is cut specifically for the LE's wider beam and unique hardware placement, not interchangeable with the standard 211 cover.
Sea Hunt has discontinued the 211 LE, but that has no effect on cover availability. Perfect Fit Boat Covers maintains patterns for every Sea Hunt model we have ever covered, including discontinued boats. Our 211 LE cover is built from the same model-specific measurements as when the boat was in production. If your 211 LE has aftermarket modifications like a different electronics box or added accessories, note those during ordering so we can adjust the pattern accordingly.
The Sea Hunt 211 LE was rated for a single outboard engine. Our boat cover extends aft to fully enclose the outboard, including the cowling, powerhead, and lower unit. The hem cord and rear strap system cinch around the motor well and transom so the cover stays secure whether you run a Yamaha, Mercury, or any other single outboard within the 211 LE's horsepower range. There is no separate engine boot — the cover is one continuous piece from bow to engine.
The cover is patterned specifically for the 211 LE's console profile, including its forward-raked windshield and grab rails. Darted seams follow the console contours so the fabric rises cleanly over the console peak and drapes down in one smooth, gradual slope to the stern without bunching or creating water-pooling flat spots. The attachment system uses stainless steel snaps along the rubrail and adjustable straps that cinch beneath the gunwales to keep the cover drum-tight.
The 211 LE's fuel capacity gives it solid range for full-day fishing trips on a single outboard. The fuel capacity itself does not change the cover pattern, but the fuel fill location and vent fittings on the gunwale are accounted for in our design. The cover's snap placement avoids blocking fuel fills, and the hem cord cinches around the transom cleanly regardless of the fuel system layout beneath the deck.
No — please remove the cover before towing your Sea Hunt 211 LE. Our covers are not designed to be trailered: towing with the cover on can cause severe damage to the cover and voids the warranty. The cover is designed for storage only — on a trailer, boat lift, dry stack, or jet dock — and comes off in minutes at the ramp.
Yes. When you place your order, note any aftermarket additions such as a bow-mounted trolling motor, power poles, a jack plate, or an oversized electronics housing. We can modify the cover pattern to accommodate these — for example, a reinforced slit with drawstring closure for a trolling motor shaft, or adjusted aft sections to clear power pole mounts. The goal is a custom fit that accounts for your specific boat setup, not just the factory configuration.
A center console boat cover is a full-deck cover patterned to the exact dimensions of your specific boat — hull length, beam width, console shape, and hardware placement. Unlike universal covers that come in generic S/M/L sizes and leave gaps around consoles and windshields, a boat cover fits like a tailored garment with no excess fabric to catch wind and no exposed areas where water and debris can reach the deck. This precision fit prevents UV degradation, moisture intrusion, and the flapping that destroys loose covers in storms.
We offer two primary fabric choices: 9 oz solution-dyed polyester and Sunbrella acrylic. The 9 oz polyester is our most popular option — heavy enough to resist tearing and abrasion while remaining breathable to prevent mildew buildup. The solution-dyed construction locks color into each fiber during manufacturing so it will not fade, bleed, or transfer to your gelcoat. Sunbrella offers superior UV resistance and color retention for boats stored in direct sun year-round or in demanding saltwater environments, backed by a 6-year fabric warranty.
Ordering is the same as for any current-production model: select the Sea Hunt 211 LE from our product catalog, choose your preferred fabric and color, and note any modifications like trolling motor cutouts or power pole clearances during checkout. Our team builds the cover from model-specific patterns based on the 211 LE's actual hull and console dimensions. most covers are made to order and ship within 1–3 weeks and arrive with all mounting hardware including stainless steel snaps, adjustable straps, and a hem cord.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Why the Discontinued Sea Hunt 211 LE Still Deserves a Custom Cover
The Sea Hunt 211 LE may no longer roll off the production line, but thousands of these Limited Edition center consoles are still fishing hard on bays, flats, and nearshore reefs across the country. The 211 LE was built as an upgraded version of the standard 211 — wider beam, heavier construction, and enhanced hardware throughout. That kind of boat deserves more than a generic tarp thrown over it between trips. Our custom boat cover is patterned from the 211 LE’s actual hull dimensions and console geometry, wrapping the entire boat in one continuous piece of marine-grade fabric from bow to engine cowling. Browse the full Sea Hunt cover collection to see how we protect every model in the lineup.
Built for the 211 LE’s Center Console Layout and Limited Edition Features
The 211 LE’s center console layout includes a helm station with forward-raked windshield, grab rails, rod holders along the gunwales, a livewell, fish boxes, and enough open deck space for casting. Our cover is patterned to rise cleanly over the console peak and follow one smooth, gradual slope down to the transom — no bunching around the windshield, no slack pooling on the deck, and no separate engine boot. The fabric drapes over the entire hull with darted seams that follow the 211 LE’s specific contours, and the snap-and-strap attachment system locks everything tight along the rubrail. The cover extends aft to fully enclose the outboard cowling and lower unit. If you’re comparing across Sea Hunt’s T-Top lineup, check out the Sea Hunt 212 T-Top cover for a similar-sized hull with a hardtop configuration.
Fabric and Construction That Match the 211 LE’s Build Quality
Sea Hunt built the 211 LE with upgraded hardware and heavier construction for a reason — durability matters on the water. Our covers match that philosophy. The 9 oz solution-dyed polyester is our most popular option: heavy enough to resist tearing and abrasion, breathable enough to vent trapped moisture and prevent mildew, and solution-dyed so the color is locked into each fiber and will never fade or bleed onto your gelcoat. For maximum UV resistance and color retention in harsh saltwater environments, our Sunbrella option delivers premium performance backed by a 6-year fabric warranty. Both fabrics feature reinforced double-stitched seams at every stress point, stainless steel snaps, and a hem cord that cinches tight around the hull edge.
How Our Cover Protects the 211 LE’s Fishing Features
The 211 LE was designed for full-day fishing trips — and every surface on this boat takes a beating from sun, salt, and weather between those trips. Our cover blocks UV radiation from cracking vinyl upholstery and fading gelcoat, keeps rain and debris out of rod holders, livewells, and storage compartments, and prevents bird droppings and tree sap from bonding to exposed surfaces. The 211 LE’s open center console layout means every square inch of deck is exposed when uncovered — our cover eliminates that vulnerability completely. For a look at how we handle the Escape series on the same 211 platform, see the Sea Hunt 211 Escape LE cover.