Sea Pro 172 Center Console Boat Cover & Canvas

Sea Pro 172 Specifications

  • Builder: Sea Pro Boats, Whitmire, South Carolina
  • Type: Center-console bay boat, single outboard
  • Length: 17'2"
  • Beam: About 7'2"–7'4" (varies by source)
  • Draft: About 10–12"
  • Deadrise: 15° at transom
  • Fuel: 28 gal
  • Power: Single outboard, 115 hp max
  • Livewells: Two, 12 gal total
  • Cover Shipping Weight: 25 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
  • Coverage: Full cover from bow to stern and rubrail to rubrail, peaking over the console and windshield and covering both casting decks and the outboard cowling
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 25 lbs
Fabric

9oz Polyester

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's patterned for the Sea Pro 172 Bay: 17'2" long with a center console, forward and rear casting decks and no T-top. It isn't for the older Sea Pro 1700 SV, which has its own page. Please confirm your model and year when you order so we can check the pattern before we cut; if you aren't sure, check the model name and length on your registration or hull paperwork.
The cover runs aft over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. Tilt the engine down so the fabric hangs evenly.
Fold the bimini down and stow it in its boot, then cover the boat; the cover isn't cut around an open bimini frame. If your 172 has a T-top or other fixed top added, contact us before ordering, since that boat needs a T-Top style cover.
If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz $750.00  ·  Sunbrella $885.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty.

    Our covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you are agreeing to modify your cover further if the fit at the motors isn't as desired.

    Motor Option

    Bow Option

    test

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    Additional Option

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Sea Pro 172 Center Console Boat Cover — Custom-Fit for the Sea Pro 172 Bay

The Sea Pro 172 is the smallest boat in the Bay series from Sea Pro Boats, which builds its saltwater fishing boats in Whitmire, in Newberry County, South Carolina. It’s a 17’2″ center-console bay boat with a beam of about 7’2″ to 7’4″ (sources vary), a 15-degree transom deadrise, a shallow draft of about 10 to 12 inches, 28 gallons of fuel and a single outboard rated up to 115 hp, on a hand-laid fiberglass hull with all-composite construction and a fiberglass stringer system. The layout is built for casting: forward and rear casting decks, a console with a windshield and grab rail, a 135-quart insulated fish box in the bow, two aerated livewells totaling 12 gallons, a finished anchor locker and a stern lazarette for the batteries and rigging. A rear bench seat with a backrest, bow cushions and a bimini top are among the options owners add. This Center Console cover is patterned for the Sea Pro 172 without a T-top, and like all of our Sea Pro boat covers, it’s cut to this hull rather than a generic 17-foot size chart.

How It Fits the Sea Pro 172

The cover peaks over the console, windshield and grab rail and slopes down to the gunwales on both sides, so rain runs off instead of pooling on the casting decks. Forward it runs across the bow casting deck and fish-box hatch to the stem; through the middle it takes in the console and any bench seat or casting chair, falling to the rubrail along the narrow beam. Aft, it covers the rear casting deck and livewell lids and falls as one loose drape over the outboard cowling, with the lower unit exposed. Fold a bimini down into its boot before covering. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For Sea Pro’s older 17-foot model, see our Sea Pro 1700 SV Center Console cover; if you’re stepping up a size, see the Sea Pro 180 T-Top cover.

Sign up for updates and information about our business