World Cat 230 DC Center Console Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

World Cat 230 DC Specifications

  • Builder: World Cat, Tarboro, North Carolina
  • Hull: Power catamaran (twin hulls)
  • Type: Dual console power catamaran
  • Length: 22'7"
  • Beam: 8'6"
  • Draft: 11"
  • Dry Weight: About 4,440 lb (earlier catalog) to 5,400 lb (current), with power
  • Fuel: 89–93 gal (two tanks)
  • Power: Twin outboards, 230–300 hp max
  • Cover Shipping Weight: 36 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
  • Coverage: Full cover from bow to stern and rubrail to rubrail on both hulls: windshield, both consoles, seating and livewell, draping over the twin outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 36 lbs
Fabric

9oz Polyester

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's patterned for the World Cat 230 DC dual console catamaran (22'7" overall, 8'6" beam) without a hard top. If your 230 DC has a hardtop, choose our World Cat 230 DC T-Top cover instead. Please confirm your model when you order; if you aren't sure, check the model name on your registration or hull paperwork.
Center Console and T-Top are the names of our two cover styles, not boat types. A T-Top cover is for a boat with any hard top and fits up under it. A Center Console cover is a full cover for a boat with no hard top, running from bow to stern and rubrail to rubrail, windshield and engines included, which is what a 230 DC without a top needs.
The cover runs aft over the transom and falls as one loose drape over both outboard cowlings; there are no separate fitted engine pockets, and the lower units stay exposed below the hem. Tilt the engines down so the fabric hangs evenly.
It covers the deck from bow to stern as one piece, and the hem cord follows the rubrail around the outside of both hulls. The tunnel between the hulls stays open, and the tie-down straps secure the cover from each side.
If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz $1,135.00  ·  Sunbrella $1,335.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty.

    Our covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you are agreeing to modify your cover further if the fit at the motors isn't as desired.

    Motor Option

    Bow Option

    test

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    Additional Option

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

World Cat 230 DC Center Console Boat Cover — Custom-Fit for the World Cat 230DC Dual Console Catamaran Without a Top

World Cat has built outboard-powered catamarans in North Carolina since 1998. It started in Greenville and moved production to Tarboro, still its headquarters, with a second plant in Greenville. Its boats ride on two hulls with a tunnel between them. The 230 DC is its 23-foot dual console catamaran. World Cat lists the current boat at 22’7″ overall with an 8’6″ beam, an 11-inch draft, about 5,400 lb dry with power, 89 gallons of fuel and a 300 hp maximum; an earlier factory catalog gave about 4,440 lb and 230 hp. It has a three-piece walk-through windshield, helm and passenger pedestal seats, a full-size head in the port console, cushioned bow seating for four and a 30-gallon livewell between the aft seats. Earlier boats listed a fiberglass hardtop and a bimini as options, so some 230 DCs have no top at all. This Center Console cover is patterned for the World Cat 230 DC without a hard top, and like all of our World Cat boat covers, it’s cut to this hull rather than a generic 23-foot size chart.

How It Fits the World Cat 230 DC

The cover goes over the whole boat in one piece. It peaks over the walk-through windshield and both consoles, then slopes down over the helm and passenger seats to the gunwales. It runs forward over the bow seating, with the hem following the rubrail around both hulls; the tunnel between the hulls stays open. Aft, it covers the aft seats and livewell, then falls as one loose drape over the twin outboards, with the lower units exposed. Take off the bow and aft cushions first, and if your boat has a bimini, mention it when you order so we can check the fit. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. If your 230 DC has the factory hardtop, see our World Cat 230 DC T-Top cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })