Tidewater 2300 Bay Specifications
- Length Overall (LOA): 23'0"
- Beam: 8'6"
- Dry Weight: ~3,000 lbs
- Engine: Single outboard, max 250 HP
- Fuel Capacity: 69 gallons
- Draft: ~12"
- Hull Type: Modified-vee bay boat, 15° deadrise
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5-7 years); Sunbrella acrylic (8-10 years)
- Fit: Custom-fitted to 23'0" Tidewater 2300 Bay specifications
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 33 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
We offer three fabric tiers for the 2300 Bay. The 7 oz polyester provides lightweight protection for boats stored under a carport. The 9 oz solution-dyed polyester — our most popular option — delivers superior UV resistance and mildew protection rated for 5 to 7 years. The premium Sunbrella acrylic upgrade extends that to 8 to 10 years, making it ideal for the 2300 Bay's typical use in warm southern coastal environments where UV exposure is constant.
Yes — the cover is custom-patterned with reinforced cutouts that wrap precisely around the 2300 Bay's factory T-Top support legs. The fabric attaches at the underside edge of the T-Top hardtop, then drapes down around the support posts and extends to the hull's chine. The hardtop remains fully exposed on top while everything below — console, leaning post, cockpit, and hull sides — is enclosed. Reinforced binding at each cutout prevents fraying.
Installation takes under five minutes working solo. Drape the cover over the T-Top frame from the hardtop attachment points, letting the fabric fall around the support legs. Pull forward to the bow and aft to the transom, then down each side. Secure the hem cord along the rub rail and fasten the adjustable tie-down straps underneath. The cover is patterned to the 2300 Bay's approximately 23-foot length and 8'6" beam, so everything aligns naturally.
Yes. The cover is reinforced at every high-stress point — bow eye, T-Top leg cutouts, cleat locations, and transom edge — with double-stitched seams that handle highway-speed wind loads. The 2300 Bay's roughly 3,000-pound dry weight makes it a commonly trailered bay boat, and the adjustable strap system cinches tight to prevent billowing. The hem cord locks along the rub rail for a secure seal the entire trip.
The cover creates a complete barrier over every exposed surface below the T-Top hardtop. The 2300 Bay's helm electronics, fishfinder, VHF radio, leaning post, rod holders, aerated livewells, insulated storage, and all cockpit upholstery are fully enclosed. As the flagship of Tidewater's Bay/BayMax family, the 2300 Bay has more fishing features and exposed surfaces than smaller models — our cover accounts for all of them.
Every cover includes a 2-year manufacturer warranty covering defects in materials and workmanship — stitching failures, fabric delamination, hardware corrosion, and snap or buckle breakage. This applies whether your 2300 Bay is stored on a trailer, boat lift, or at a dock. The 9 oz fabric delivers 5 to 7 years of protection, and the Sunbrella upgrade extends that to 8 to 10 years.
The cover is water-resistant with a durable water-repellent (DWR) finish — rain and spray bead up and roll off rather than soaking through. It is intentionally not sealed waterproof because a fully sealed cover on the 2300 Bay's 8'6" beam would trap humid air underneath and promote mildew on the upholstery, electronics, and gel coat. The breathable construction allows air circulation while blocking direct water contact — ideal for a bay boat that often sits covered in warm, humid coastal climates.
The cover is patterned to fit the standard-production Tidewater 2300 Bay with a factory T-Top. Tidewater has maintained the 2300 Bay's core hull dimensions — approximately 23 feet LOA and 8'6" beam — consistently across production runs. If your boat has significant aftermarket modifications that alter the profile, contact us to confirm fitment before ordering.
The 9 oz solution-dyed polyester is available in Navy, Black, and Charcoal. The 7 oz option offers the same palette at a lighter weight. Upgrading to Sunbrella acrylic adds Captain Navy, Pacific Blue, Forest Green, and additional marine-grade shades. All fabrics use solution-dyed fiber where pigment is embedded during manufacturing, so the cover resists fading even after years of direct sun exposure.
Shipping is a flat rate of $30 per cover to anywhere in the continental United States. Orders typically ship within 1 to 2 business days via ground carrier. The cover arrives with all mounting hardware included — stainless steel snaps, adjustable tie-down straps, hem cord, and T-Top attachment fittings — so your 2300 Bay is protected as soon as the box arrives.
Tidewater 2300 Bay T-Top Boat Cover — Largest Bay Boat in the Fleet Deserves Top-Tier Protection
The Tidewater 2300 Bay is the largest model in the Bay/BayMax family — approximately 23 feet of dedicated bay boat performance with an 8’6″ beam, roughly 3,000-lb dry weight, and power options up to 250 HP. As the flagship of Tidewater’s shallow-water lineup, the 2300 Bay pushes the envelope on what a bay boat can do — big enough to handle open-bay crossings and nearshore runs, yet shallow enough in draft to reach the backwater flats, oyster bars, and tidal creeks that define Carolina lowcountry fishing. A 69-gallon fuel tank provides the range for all-day exploration, and the hull’s 15-degree deadrise balances stability with a dry ride. Pair your 2300 Bay with boat shade kits for on-water sun protection during those marathon summer sessions.
Custom-Cut for the 2300 Bay’s Flagship Bay Layout
This T-Top cover is tailored to the 2300 Bay’s expansive hull profile — the largest bay boat pattern in the Tidewater collection. The cover accounts for the T-Top frame, center console, leaning post, casting decks, livewells, rod holders, and all standard hardware. Reinforced cutouts wrap cleanly around T-Top legs, and the cover drapes over the full hull from bow to stern. One person installs it in under five minutes with the strap-and-buckle system, and the hem cord locks beneath the rubrail for a rattle-free fit at highway speed. The 2300 Bay trailers well for its size, and this cover rides tight from driveway to destination. The Bay family circles back — for the smallest model, see the Tidewater 1800 Bay Max T-Top cover.
Heavy-Duty Fabric for a Heavy-Duty Bay Boat
The 2300 Bay’s size and capability mean it sees more exposure than smaller boats in the fleet — more UV, more salt, more weather. Choose 9oz solution-dyed marine fabric for 5-7 years of proven protection, or upgrade to premium Sunbrella acrylic for 8-10 years of service life. Both options are water-repellent with a DWR finish, mildew-resistant, and breathable to prevent trapped moisture from damaging the 2300’s upholstery, electronics, and gel coat. Double-stitched seams and reinforced stress points handle the cover’s larger surface area with confidence, and a 2-year manufacturer warranty backs every cover. For complete bow-to-stern coverage, explore the Tidewater 2200 Bay center console cover for additional protection options.
Reviews
There are no reviews yet.