Edgewater 262 CX T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Edgewater 262 CX Specifications

  • Builder: EdgeWater Power Boats (Edgewater, FL)
  • Type: Crossover with hardtop
  • Model Years: 2017 on
  • Length Overall: 26'5"
  • Beam: 9'3"
  • Draft: 21"
  • Dry Weight: About 5,700 lb (BoatGuide)
  • Fuel Capacity: 163 gal
  • Max Power: 500 hp, twin outboards
  • Cover Shipping Weight: 36 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Hardtop supports, walk-through windshield, both consoles, bow lounge, cockpit seating and twin outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 36 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The EdgeWater 262 CX crossover, introduced in 2017, with its integrated hardtop. It is not cut for the 262 CC center console or the smaller 248 CX.
CX is EdgeWater's crossover line — boats with a helm console to starboard, a port console and a walk-through windshield, laid out for fishing, water sports and cruising.
Our T-Top style is made for any boat with a hard top — a T-top, a hardtop or an integrated hardtop with a glass windshield. The cover runs up under the top and around its supports, so the roof stays exposed. If your boat has outriggers, a tower or an aftermarket top, send us photos before ordering.
Yes. The stern section is cut to wrap both outboards as part of the same cover, so you don't need separate motor covers.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,900.00  ·  9oz $2,150.00  ·  Sunbrella $2,550.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Edgewater 262 CX T-Top Boat Cover — Custom-Fit for the EdgeWater 262 CX Crossover With Hardtop

EdgeWater Power Boats builds its boats in Edgewater, Florida, using its Single Piece Infusion (SPI) process. The 262 CX is EdgeWater’s 26-foot crossover — a dual-console-style boat built for fishing and family days alike — unveiled at the 2017 Miami and New England boat shows as an improvement on the 248 CX, and still listed as a 2025 model. Spec sheets give it 26’5″ overall, a 9’3″ beam, a 21-inch draft, 163 gallons of fuel and a 500 hp rating on twin outboards, usually Yamaha F200s; BoatGuide lists about 5,700 lb dry. The features a cover has to clear include the standard integrated fiberglass hardtop with LED spreader lights, a frameless tempered-glass walk-through windshield, a starboard walk-in console with a head and a port console with storage, a double-wide forward-facing bow lounge, a back-to-back Ultra Lounger over an insulated fish box, a prep station, a full-width fold-out transom seat, a transom baitwell and a dive door. This T-Top cover is patterned for the 262 CX with its integrated hardtop, and like all of our Edgewater boat covers, it’s cut to this hull rather than a generic 26-foot size chart.

How It Fits the 262 CX

The cover runs up to the underside of the hardtop and wraps its supports, leaving the roof exposed. Below, it drapes over the glass windshield and both consoles, spreads forward over the bow lounge to the rubrail, and continues aft over the Ultra Lounger and folded transom seat to wrap both outboards in one piece. Close the windshield walk-through before covering so the center section sits flat. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

A Crossover Under a T-Top Cover

T-Top is our name for the cover style, not the boat type: our T-Top covers fit any hard top, including the 262 CX’s integrated hardtop. The cover rises to the top and leaves it exposed, rather than running bow to stern over it.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the center console on the same length and beam, see the EdgeWater 262 CC T-Top cover; for the smaller crossover it improved on, the EdgeWater 248 CX T-Top cover.

Sign up for updates and information about our business