Blackfin 252 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Blackfin 252 Specifications

  • Length: 24'6" (27'5" with engine)
  • Beam: 8'10"
  • Dry Weight: About 5,400 lb
  • Fuel Capacity: 140 gal
  • Deadrise: 22° at the transom
  • Draft: About 1'9" (engines up) to 2'11" (down)
  • Power: Single outboard up to 400 hp, or twins
  • Livewell: 24 gal insulated transom baitwell
  • Cover Shipping Weight: 35 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Runs up to the underside of the hardtop, wraps the frame legs, and covers the console, leaning post, bow seating, transom bench and outboard(s); roof stays exposed
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 35 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The Blackfin 252 CC center console (24'6" hull, 8'10" beam), built from about 2020, with its hardtop. If you're unsure of your model, send us your year and a photo before ordering.
Blackfin publishes the same 24'6" length and 8'10" beam for both, and the 252 CC followed the 242 CC in the lineup. We carry a separate pattern for each, so check the model name on your paperwork or send us photos and we'll confirm which cover to order.
Yes. The 252 is sold with a single outboard or twins, and the cover wraps the engines at the stern either way. Tell us your engine setup when you order.
No. The Blackfins built from the 1970s through the 1990s were different, mostly inboard-powered boats. This pattern is for the modern outboard-powered model built in Williston, Florida. If you own a classic Blackfin, contact us with the model and year.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,425.00  ·  9oz $1,600.00  ·  Sunbrella $1,920.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Blackfin 252 T-Top Boat Cover — Custom-Fit for the Blackfin 252 CC With Its Hardtop

The Blackfin 252 CC is the modern line’s 24-foot-6 center console, built from about 2020 and still listed by dealers for the 2026 model year. Blackfin built its first boats in 1973 and earned its name with offshore fishing boats, most of them inboard-powered; the brand was later acquired by Seabring Marine, the builder of Monterey Boats, and relaunched around 2017 with an all-new line of outboard-powered center and dual consoles built in Williston, Florida. The 252 measures 24’6″ on the hull (27’5″ overall with the engine, per dealer specs) with an 8’10” beam, a dry weight of about 5,400 lb, 140 gallons of fuel and a 22° deadrise hull that takes a single outboard of up to 400 hp or twins. Standard equipment includes a fiberglass hardtop on a powder-coated aluminum frame with LED lighting, an acrylic windscreen, U-shaped bow seating with a removable forward backrest and coaming bolsters, a leaning post with a bait-prep station and rod holders, helm seats with flip-up bolsters, two insulated in-floor fish boxes with macerated pump-outs, a 24-gallon transom baitwell, a foldaway transom bench and an integrated swim platform. This T-Top cover is patterned for the Blackfin 252 CC with its hardtop, and like all of our Blackfin boat covers, it’s cut to this hull rather than a generic 25-foot size chart.

How It Fits the Blackfin 252

The cover runs up to the underside of the hardtop and wraps around the frame legs, then drapes over the windscreen and console, the leaning post and bait station and the U-shaped bow seating down to the gunwales, and continues aft over the folded transom bench and the outboard or twins as one piece; the hardtop roof and its lights stay exposed. The coaming bolsters and gunwale rod holders sit under the cover, with the hem drawn in at the rubrail. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Not the Same as the 252 DC

Blackfin also builds a 252 DC dual console on the same 8’10” beam. It has a full-width glass windshield with a walk-through door and two consoles, so it uses a different pattern — if your boat has a windshield across the full width of the cockpit, choose the 252 DC cover instead.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the dual-console version, see the Blackfin 252 DC T-Top cover; for the earlier 24’6″ center console, see the Blackfin 242 T-Top cover.

Sign up for updates and information about our business