Sea Vee 322 Z — Quick-Reference Specs
- Boat Model: Sea Vee 322 Z
- Cover Type: T-Top Boat Cover
- LOA: 32'9"
- Beam: 9'6"
- Dry Weight: 6,900 lbs
- Engine: Twin outboards, max 900 HP combined
- Fuel Capacity: 332 gallons
- Draft: 20"
- Hull Type: Twin-stepped, cross-ventilated SpeedRail® composite, 22.5° deadrise
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5–7 years); Sunbrella acrylic (8–10 years)
- Fit: Custom-fitted to 32'9" Sea Vee 322 Z specifications
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 47 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The Sea Vee 322 Z T-Top cover is available in three fabric options: 9oz solution-dyed polyester for heavy-duty everyday protection, a lighter 7oz option for budget-friendly coverage, and premium Sunbrella acrylic for maximum UV resistance and longevity. All fabrics are solution-dyed, meaning the color is infused into each fiber during production rather than applied to the surface — so the cover won't fade, bleed, or transfer dye onto your 322 Z's gel coat, console, hardtop frame, or leaning post.
Yes. The 322 Z T-Top cover is pattern-cut with reinforced cutouts that wrap cleanly around the T-Top legs, allowing the cover to drape over the entire hull — console, leaning post, rod holders, baitwells, fish boxes, and cockpit — while the hardtop remains exposed above. The cutouts are reinforced with double-stitched seams to prevent fraying or tearing around the T-Top contact points.
Installation takes under five minutes and can be done solo. Drape the cover over the 322 Z's hull, thread the hem cord along the rubrail for a snug baseline fit, and secure everything with the adjustable strap-and-buckle tie-downs. No tools required — just unfold, drape, strap, and go.
Absolutely. The 322 Z T-Top cover is reinforced for trailering at highway speeds. The hem cord locks along the rubrail and the adjustable tie-down straps prevent any flapping or shifting during transit. Given the 322 Z's size, a tandem or triple-axle trailer is recommended, and the cover holds securely even at extended highway speeds.
Yes. The cover creates a complete barrier over the 322 Z's cockpit — shielding your console-mounted electronics, GPS, fish finder, radar, autopilot, leaning post cushions, baitwell plumbing, and upholstery from UV rays, rain, salt spray, and airborne debris. The breathable fabric allows trapped moisture to vent naturally, preventing mildew in tropical Florida humidity.
Every Sea Vee 322 Z T-Top cover ships with a 2-year manufacturer warranty covering defects in materials and workmanship. The fabric itself carries additional protection: the 9oz solution-dyed polyester is rated for 5–7 years of UV and weather performance, while the Sunbrella acrylic option is rated for 8–10 years.
The cover is water-resistant with a DWR (Durable Water Repellent) finish that causes rain and spray to bead up and roll off. It's intentionally breathable rather than fully waterproof — this allows moisture trapped underneath to vent out naturally, which is critical for preventing mildew in Miami's humidity and on the 322 Z's composite SpeedRail® hull and upholstery.
Yes. This cover is designed to fit the Sea Vee 322 Z across its standard production run with the factory T-Top configuration. Because SeaVee builds every boat semi-custom to order, if your 322 Z has significant layout modifications, custom hardtop dimensions, or a non-standard T-Top, contact us to confirm fitment before ordering.
The 9oz solution-dyed polyester is available in Navy, Black, and Charcoal — the three most popular colors for T-Top covers. The premium Sunbrella acrylic option expands the palette with additional color choices. All colors are solution-dyed for long-term fade resistance, even under constant South Florida and Keys sun exposure.
Shipping is a $30 flat rate per cover to anywhere in the continental United States. Orders typically ship within 1–2 business days, so your 322 Z cover arrives quickly and ready to install.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Sea Vee 322 Z T-Top Boat Cover — SpeedRail® Offshore Performance, Tournament-Grade Protection
The Sea Vee 322 Z is flagship offshore-grade engineering from Miami’s original semi-custom builder — a 32’9″ twin-stepped, cross-ventilated hull running 22.5° of transom deadrise, a 9’6″ beam, 332-gallon fuel tank, and SeaVee’s patented SpeedRail® technology with multiple lifting bodies and reverse chines for spray deflection. Dry weight comes in at 6,900 lbs, the boat takes up to 900 HP in twin outboard configurations (300 to 425 HP each), and top speeds push past 65 mph with the right rigging. It planes at low speeds, turns sharp and crisp, and fishes tournament-class offshore from Islamorada to the Bahamas. A hull engineered to this standard earns a Perfect Fit Boat Cover that protects the full cockpit, console, leaning post, and up-to-four baitwell configuration between trips.
Tailored to the 322 Z’s Semi-Custom Offshore Layout
SeaVee builds every 322 Z to order, so no two are identical — but the core layout is consistent: center console with forward-raked windshield, aluminum leaning post with rocket launcher and rod holders, up to four baitwells totaling around 241 gallons of combined capacity, fully insulated fish boxes, self-bailing deck, and often a hardtop-mounted outrigger base. This cover is pattern-cut with reinforced cutouts that wrap cleanly around the T-Top legs, draping over the full hull — console, leaning post, bait wells, and cockpit — while leaving the hardtop exposed above. Installation takes under five minutes solo with the hem cord locking to the rubrail and adjustable strap-and-buckle tie-downs. It’s reinforced for trailering and the 322 Z’s 20-inch draft launches clean at Keys ramps. For the next step up in SeaVee’s offshore lineup, the Sea Vee 34 T-Top cover uses the same custom-fit approach.
Protection That Matches Stepped-Hull Performance
The SpeedRail® technology, multiple lifting bodies, and composite construction in the 322 Z represent decades of Miami-based R&D — your cover should reflect the same engineering standards. Choose from 9oz solution-dyed marine fabric for heavy-duty everyday protection with a 5–7 year lifespan, or upgrade to premium Sunbrella acrylic for 8–10 years of fade-resistant coverage. Both options are water-repellent with a DWR finish, mildew-resistant, and built with double-stitched seams that handle daily tropical UV, Florida Keys salt spray, and offshore humidity. Every cover ships with a 2-year manufacturer warranty and arrives ready to install. For another stepped-hull semi-custom 32-footer with comparable offshore performance, take a look at the Contender 32 ST T-Top cover.
Reviews
There are no reviews yet.