Reef Runner 34 Specifications
- Length Overall (LOA): 34'
- Beam: 10'
- Dry Weight: ~8,350 lbs
- Engine: Triple outboard, up to 1,350 HP
- Fuel Capacity: 390 gallons
- Draft: ~30"
- Hull Type: Deep-V with 24° deadrise, hand-laid fiberglass
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5-7 years); Sunbrella acrylic (8-10 years)
- Fit: Custom-fitted to 34' Reef Runner 34 specifications
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 48 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The Reef Runner 34 T-Top cover is available in 9oz solution-dyed marine fabric, which provides 5 to 7 years of UV and weather protection. You can also choose 7oz marine fabric for a lighter-weight option or upgrade to premium Sunbrella acrylic for 8 to 10 years of durability. All fabrics are water-repellent, mildew-resistant, and breathable to prevent trapped moisture under the cover.
Yes. The Reef Runner 34 cover is pattern-cut with reinforced cutouts that wrap around each T-Top frame leg. The cover drapes beneath the hardtop and over the hull, protecting the console, leaning post, seating, and gunwales while leaving the T-Top roof exposed for ventilation and structural clearance.
Installation takes one person under five minutes. Drape the cover over the bow, pull it aft beneath the T-Top, and secure it using the adjustable tie-down straps and buckles along each side. A hem cord at the rubrail locks the cover in place. No tools, snaps, or additional hardware are needed.
No — please remove the cover before towing your Reef Runner 34. Our covers are not designed to be trailered: towing with the cover on can cause severe damage to the cover and voids the warranty. The cover is designed for storage only — on a trailer, boat lift, dry stack, or jet dock — and comes off in minutes at the ramp.
Absolutely. The cover creates a complete barrier over the helm station, console-mounted electronics, GPS units, fishfinders, and all interior upholstery. It blocks UV rays, rain, salt spray, bird droppings, and airborne debris — whether your Reef Runner 34 is on a trailer, on a lift, or in dry storage.
Your Reef Runner 34 cover is backed by our manufacturer's warranty for the original purchaser. Materials and workmanship — stitching, straps, buckles, zippers, and other hardware — are covered for 1 year from the purchase date. Fabric is covered for 3 years on 7oz, 5 years on black or navy 9oz, and 6 years on Sunbrella. Covered defects are repaired or replaced after you contact us for a Return Merchandise Authorization (RMA) number. The warranty does not cover improper use, accident or negligence, unauthorized modifications, improper care, mold or mildew, incorrectly placed orders, theft or loss, or acts of God — and traveling with the cover on or using it in the water voids the warranty. See our Warranty page for full details.
The cover is water-resistant with a durable water repellent (DWR) finish that causes rain and spray to bead and roll off the surface. It is intentionally breathable rather than fully waterproof, which prevents moisture and mildew from building up underneath — a critical feature in Florida’s humid marine climate.
Yes. This cover is designed to fit all Reef Runner 34 (340 Open) models with a factory-installed T-Top across standard production years. The custom-fitted pattern accounts for the 34’s consistent hull shape, 10-foot beam, and T-Top frame geometry.
The Reef Runner 34 cover is available in 9oz solution-dyed polyester in Navy or Black, 7oz polyester in Black, or premium Sunbrella acrylic in Marine Blue, Black, or Smoke. Choose your fabric and color in the order options above.
Shipping is a $30 flat rate per cover within the continental United States. Because every cover is custom-made to order, please allow 1–3 weeks for your Reef Runner 34 cover to be made and shipped — you'll receive tracking information as soon as it leaves our facility.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Reef Runner 34 T-Top Boat Cover — Deep-V Offshore Protection Built to Last
The Reef Runner 34 is a 34-foot deep-V center console built in Opa Locka, Florida, by a family-owned company with decades of marine construction heritage. Powered by triple outboards producing up to 1,350 horsepower, the 340 Open rides on a 24-degree deadrise hull with a 10-foot beam, 390-gallon fuel capacity, and a dry weight of approximately 8,350 pounds. This custom-fitted T-Top boat cover wraps the entire hull beneath the hardtop, shielding the Reef Runner 34’s helm station, leaning post, console electronics, and 65-gallon livewell from sun, rain, salt spray, and seasonal storage exposure.
Tailored to the 34’s Tournament-Ready Layout
Every Reef Runner 34 cover is pattern-cut to account for the boat’s T-Top frame legs, center console profile, and integrated rod holders. The cover drapes over the gunwales with a hem cord that seats against the rubrail, while adjustable tie-down straps secure the fit from bow to stern. Installation takes one person under five minutes — drape, strap, and buckle with no tools required. Remove the cover before towing — it’s designed for storage, not highway travel. If you fish similar deep-V offshore platforms, the Nor-Tech 340 Sport T-Top cover offers the same custom-fitted protection for another high-performance 34-footer.
Protection That Matches Reef Runner’s Hand-Laid Build Quality
Reef Runner builds every hull with hand-laid fiberglass and backs it with a 10-year limited hull warranty — your cover should match that commitment. Choose from 9oz solution-dyed marine fabric rated for 5 to 7 years of UV and weather resistance, or upgrade to premium Sunbrella acrylic for 8 to 10 years of protection. Both fabrics are water-repellent, mildew-resistant, and breathable enough to prevent trapped moisture. Double-stitched seams and reinforced stress points ensure the cover holds up season after season. Every cover ships with our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and $30 flat-rate shipping to the continental U.S.. For another premium offshore build that demands this level of protection, see the Intrepid 32 T-Top cover.