Custom Fit Boat Covers for Southport Boats
Our Southport boat covers are custom-patterned for your exact model — from the 27, 30, and 33 FE center consoles to the 33 and 42 DC dual consoles. Founded in 2003 and built in Maine, Southport makes premium offshore boats on a C. Raymond Hunt-designed deep-V hull known for a soft, dry, Down East ride. Because a center console and a dual console — and the brand’s distinctive wide-beam, hard-top hull — need very different covers, a generic one won’t fit right. Ours follows your boat’s exact lines. Every cover is made in the USA from marine-grade, water-repellent fabric.
Southport Models We Cover
Southport Boat Cover Features and Benefits
Every Southport cover is custom-patterned to your exact model and year — FE center console or DC dual console — and tailored around the console, hard top or T-top, and seating so it fits without flapping or pooling.
Built from marine-grade, UV-resistant fabric, our covers stand up to the sun, salt, and humidity Southports run in offshore — resisting fading, mildew, and cracking season after season.
On the trailer, at the dock, or in storage, your cover shields the helm, electronics, and upholstery from UV, rain, dust, and bird droppings — protecting the resale value of a premium offshore boat.
Reinforced tie-downs and a snug, tailored cut keep the cover secure and quiet — even at highway tow speed or in a coastal breeze. Proudly custom-made in the USA.
About Southport Boats
Southport Boats was founded in 2003 and builds premium offshore boats in Maine. Southports are built on a C. Raymond Hunt-designed continuously variable deep-V hull — sharp at the bow, with a warped running surface and lifting strakes — that gives the brand its signature soft, dry, Down East offshore ride. The lineup spans FE (Family Edition) center consoles like the 27, 30, 33, and 38, plus the 33 and 42 DC dual consoles, roughly from the mid-20s to the low 40s in length.
Why Protect Your Southport with a Custom Cover?
A Southport is a premium offshore boat that holds its value — which makes protecting it worthwhile. Left exposed, UV, salt air, rain, and bird droppings fade gelcoat, stain upholstery, and wear on electronics. A properly fitted cover shields the helm, seating, and rigging on the trailer, at the slip, or in storage, helping keep your Southport in the condition that commands its value.
Custom-Fit vs. Generic Covers
A universal cover sits loose, traps moisture, and flaps in the wind, chafing gelcoat and loosening fasteners at highway speed. Our Southport covers are custom-patterned to your specific model and year for a snug, tailored fit that sheds water and stays put.
Center Console or Dual Console — and the Hard-Top Factor
Southport builds both FE center consoles and DC dual consoles, and they take different covers. Most Southports also carry a distinctive factory hard top or T-top, so the right product is usually a cover that fits around the top rather than a simple snap-on. Tell us your exact model, year, and top so the cover matches your boat — current or a classic 26, 27/272, 28, or 29/292.
Features of Our Southport Boat Covers
Each cover is crafted from marine-grade, UV-resistant fabric chosen to handle sun, salt, and humidity without fading or cracking. Reinforced stitching, tailored seams, and secure tie-downs keep it snug and quiet, while a water-repellent finish helps rain and spray run off instead of soaking through.
Ready to Cover Your Southport?
Select your model above to start a custom cover built for your exact Southport — current FE and DC models or a classic hull. Every cover is proudly custom-made in the USA. If you have questions about fit, fabric, or your top, our team is glad to help.
Frequently Asked Questions - Southport Boat Covers
What Southport models are covered by your boat covers?
We offer custom-fit covers for Southport T-Top models, including the 26, 27, 28, 29, and 292 models.
Are the boat covers water-resistant?
Yes, our covers are water-resistant, providing effective protection against rain and moisture while allowing air circulation to reduce the risk of mold and mildew.
Can I tow my Southport boat with the cover on?
Yes, our covers are designed for trailering, protecting your boat from road debris and weather during transport.
How do I find the right cover for my boat?
Use our cover selector tool to select your Southport model, ensuring a perfect fit and suitable customization options.
How should I maintain my Southport boat cover?
Clean your cover by brushing off loose dirt, rinsing with fresh water, and using a mild soap solution for stubborn stains. Avoid harsh chemicals to preserve the fabric's integrity and longevity.
Which Southport models do you make covers for?
We make custom covers across the Southport lineup — current FE center consoles (27, 30, 33, 38) and DC dual consoles (33, 42 DC) — plus classic models like the 26, 27/272, 28, and 29/292. Tell us your model and year and we'll match the right pattern.
My Southport has a hard top or T-top — does the cover fit it?
Yes. Most Southports run a factory hard top or T-top, so let us know your top configuration when ordering and we build the cover to fit around it so the helm and cockpit stay protected.
Do you make covers for both Southport center consoles and dual consoles?
Yes. The FE center consoles and DC dual consoles have different helms and windshields, so they take different covers. Just select your exact model so the cover fits your layout.
Are your Southport covers made in the USA?
Yes — every Southport cover is custom-made in the USA from marine-grade, water-repellent fabric built for saltwater use.
Helpful boat cover guides
New to ordering? These walk you through it: the Boat Cover Buyer’s Guide (which cover you need and every option explained), the Fabric Guide (7oz vs 9oz vs Sunbrella), and How to Measure if your model isn’t listed. T-Top or open console? See T-Top Covers and Center Console Covers.